cement mill used for sale

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Buzuluk 84inch Two Roll Mill (Double Roller) Year 1986 Roller diameter 660 mm Length of roller 2100 mm Number of rollers 2 Drilled rolls Speed of the rear roller 36,2 m/min Speed of the front roller 29,6 m/min The ratio of the gear wheels 1 : 1,22 The roller bearings antifriction The consumption of the cooling water 12 m3 per hour Maximum gap between rollers 30 mm The main electric motor 160 kW, 985 operating speed/min, 380V, 50 Hz Gear ratio of gearbox i = 10 Machine dimension L x W x H 5500 x 4000 x 1960 mm Machine weight 35 860 kg

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG-R 200 fluidised bed classifier jet mill system. The AFG-R is a special variant of the standard AFG where one nozzle is placed vertically pointing upwards on the bottom of the grinding chamber to elevate all the material in the fluidised bed to the jets meeting point, specially interesting for heavy and difficult to grind materials. This machine is specially  ...

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine AFG 400 classifier jet mill for the ultrafine grinding of different products with a sharp top cut. This pulveriser allows the fine comminution of products in the bottom chamber of the machine. Thanks to the different nozzles, the pressurized air reduces the product size to the desired one. The top part is fitted with air classifiers that ensure the required top c ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...

REF-2471 COMITROL 3000 PROCESSOR APPLICATIONS It is mainly used for milling products with high moisture content such as kernel sweet corn, cooked meats, and vegetables. It has a variety of cutting heads and impellers. The cutting heads provides the desired particle sized. OPERATING PRINCIPLE The product is guided to the impeller. Once it is introduced in the impeller, the product starts to spins in high speed inside the cutting head. Those remaining little pieces that protrude between the spaces in the dividers are cut in flakes. Brand: URSCHEL Model: Comitrol 3000 - Power: 30 CV - Total Dimensions: height 173 cm, width 77 cm, length 125 cm. Ø of the hopper: 21 cm.

This DMG Mori Milltap 700 Milling machine was manufactured in the year 2012 and has 16240 production hours, of which 7478 production hours. It is equipped with a SIEMENS SINUMERIK 840 D control unit. The machine has a spindle speed of 10000 rpm.

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

8″ x .220″ GSI HF Tube Mill Year: 2000, Diameter: 1.5″-8″, Wall Thickness: .050″-.220″, Shaft Diameter: 125mm, Speed: 20-40 meters per minute, Coil Width: 148mm-990mm, Coil Weight: 5,000Lb, Product: Round, Square, Rectangular. Double Mandrel Uncoiler, Shear & End Welder, Cage Type Accumulator, Forming Mill with 210Kw DC Motor, 300Kw High Frequency Welder, Sizing Mill with 125Kw DC Motor, Two (2) Turk Heads, Flying Cut-Off Saw, Run-Out Table & Conveyor. Lots of Tooling, Electrics, Hydraulics, Controls

Vert. Milling machine make RAMBAUDI type RAMM MILL 10Machine -No: 342 Year 1973Table length X: 1200 mmCross table Y: 510 mmTichsenkrechtweg Z: 550 mmTable size: 1460 x 400 mmTable load max .: 1500 kg3 aut. Pinolenvorschübe: 0.035 / 0.07 / 0.15 mm / U.Rapid traverse: 2500/1250 mm / min.Stroke: 150 mmDrive power: 7.5 kWWeight approx: 5.0 tOutside dimensions approx: 2400 x 2135 mmWith- aut. Tool clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Exchange units for contour milling HOMAG

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Berstorff Cracker Mill with Roll dia 600 x 800mm Description attached!

Reconditioned Christy Turner Pulverizer complete with new full set of ADI liners and hammers installed, the machine has been well maintained and runs like new. Comes with a lot of spare parts including hammers, shafts, spacers, some ADI liners and a completely reconditioned spare main drum complete with mounted bearings.

Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...

X/Y/Z 200 / 150 / 250 mm Distance spindle-table 95 - 245 mm Rapid traverse in X/Y/Z 5 m/min Working feed X/Y/Z - 5 m/min Clamping surface 420 x 125 mm table load 10 kg speed 5000 rpm drive power 1.1 kW Number of tool stations10 tool diameter 55 mm tool length 50 mm Dimensions (LxWxH)1135 x 1100 x 1100 mm Machine weight 400 kg

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

This is a Hammer Mill from Nuova Guseo Italy in great working condition. This Griding Machine, has been recently been refurbished and works perfectly for many applications. 15kw Motor 9 X 4rows = 36pieces of hammers with 6mm thickness Hammers can be turned and used 4 times to all 4 sides Amperage indication on the panel 10 different sieves (9 in the photos one is installed) with diameter Φ1.5mm, Φ2mm, Φ8mm, Φ15mm, Φ16mm, Φ22mm, Φ25mm, 2pcs X Φ30mm. HAMMER MILL – SERIES RAPIDE Between all size reduction equipment, hammer mills are more widely used than any other to grind minerals and fodder. Now thanks to some special features of the mills series RP, they can be used in foodstuffs and chemicals industries too. Of simple, yet robust design, the hammer mills are suitable to meet the most medium size reduction requirements. They can be used to mill various mater ...

Berstorff Cracker Mill, Excellent condition, Length of roller 600mm, Roller diameter 430mm, Rubber mill weight 10 tons, Width 2150 mm x 4200 mm long x approx 1800 mm high, The Following work has been completed: New plain bearings, New Roller ribbing, New Roller ground, New Grease pump, brake cylinder, New Safety bars, New Conveyor,

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Alpine pin mill type 400 Z, burr disc diameter. 400 mm, 18.5 Kw. (engine not available)

HAAS MINI MILL HE CNC machining center built in the USA in 2001 is distinguished by its incredible milling precision and accuracy, making it ideal for a wide range of applications in any production facility. Made from the highest quality raw materials, the stable, compact design with sliding doors effectively dampens the vibrations generated during machining and provides easy access to the work space. The work space is equipped with a T-slot table, a reliable high-speed spindle and a 10-position tool magazine. To minimise the need for the operator to operate the machine, all machining parameters are programmed in the intuitive HAAS CNC control, which fully automatically executes the machining cycles. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC control: HAAS - work table surface area (L x W): 914 x 305 mm ...

HAAS MINI MILL HE CNC vertical milling center was built in 2006 in the United States. This compact machine, with its emphasis on high productivity and precision milling, is ideal for any production facility, even during the most intensive challenges. Behind the sliding doors there is a large work space equipped with a T-slot table, a 10-position tool magazine and a reliable high-speed spindle. Machining programmes are created in just a few steps in the intuitive HAAS CNC controller, which performs cycles fully automatically and minimises the operator’s need to operate the machine. The HAAS CNC vertical machining center weighs 2200 kg. Technical data of the HAAS MINI MILL HE CNC milling machine - CNC controller: HAAS - feed rates in the X/Y/Z axis: 406/305/254 mm - work table surface (L x W): 914 x 305 mm - maximum workpiece weight: 227 kg - maximum spindle rotational speed: 600 ...

CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power

General SKU383U1043 LocationBarneveld MakeNetzsch TypeMastermill 3 No.2404563 Year of construction2015 Main Features MaterialStainless steel Volume10 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 Vertical sandmillcheck Basket Mill Capacity9 Ltr. Housing dimensions Dia. 220x250 mm InletDia. 220 mm With sievecheck With jacketcheck Motor2,2 kW With variable speed drivecheck frequency converter Rotor speed1100-3000 rpm With ballscheck Information With switchgearcheck (as is) Total height1,2 m Weight630 kg CEcheck Floorspace1,2x0,9 m ATEX compatiblecheck Extra SpecificationsDrive power mill, 2,2 kW, drive power stirrer 0,75 kW, mill speed 1100-3000 rpm, mixer speed 180-2600 rpm, basket volume 0,5 ltr, :Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in wo ...

General SKU282U515 LocationBarneveld MakeAlpine Augsburg TypeB500 Main Features Inlet diameter120 mm Width460 mm Specified Features - Hammer Mill MaterialSilicon steel 1.5023, Mild steel Hammer Mills Hammer millcheck Rotor sizeDia: 395x170mm Grinding room sizeDia: 460x200mm Moving hammerscheck Hammer width170mm Housing dimensions 800x300mm Inlet170x100mm Without motorcheck Information Year of constructionunknown Floor space1x0,85m Total height0,77m Weight400kgHammer MillsHosokawa AlpineMills > Hammer MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU365U987 LocationBarneveld MakeBuhler No.74240 Year of constructionunknown Main Features Motor0.37 KW Width200 mm Specified Features - Three roll mill Three roll mill3 Roll diameter145 Roll width200 Rolls placed horizontalcheck Motor0.37kW, 220/380Volt, 1390rpm (EX) Hydraulic roll adjustmentcheck With hydraulic unitcheck Rolls can be cooledcheck With scrapercheck MaterialSilicon steel 1.5023 Information Mounted on framecheck With switchgearcheck Floorspace1,5x0,9 m Total height1,15 m Weight520kg ATEX compatiblecheckThree roll millsPaints & coatingsBühlerMills > Three roll millsIndustries > Chemical > Paints & coatingsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...

General SKU299U731 LocationBarneveld MakeDrais TypePM-DCP 3-45 No.54238 Year of construction1991 Pressure Working pressure3 Bar Main Features MaterialChromed steel Volume12 Ltr. Motor45 KW Specified Features - Sand mill MaterialChromed steel, Stainless steel 1.4462 (318LN), Tungsten Vertical sandmillcheck Capacity12 Ltr. Housing dimensions dia. 365x400 mm Inlet25 mm Outlet19 mm With mechanical sealcheck With jacketcheck (9+5 Ltr.) Max. temperature98 °C Motor45 kW, 380/220 Volt With variable speed drivecheck Information With switchcheck Weight2000 kg Floorspace1,5x1,05 m Total height2,1 mSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU342U846 LocationBarneveld MakeLehmann TypeFM 20 Ex No.011766 Year of construction1998 Main Features MaterialStainless steel Volume20 Ltr. Motor17.5 KW Specified Features - Sand mill MaterialStainless steel 1.4306 (304L) Horizontal sand millcheck Capacity20 Ltr. Housing dimensions dia. 300x415 mm Inletdia. 45 mm With mechanical sealcheck (Chetra GmbH) With jacketcheck Motor17,5 kW 400 Volt (Ex) With ballscheck (Ø 1,2/1,7 mm) Information Mounted on framecheck With switchcheck Weight900 kg CEcheck With switchgearcheck(as is) Floorspace2,1x0,7 m ATEX compatiblecheckSand millsLehmannMills > Sand millsBrand > Lehmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV TypeSmimo-MI-100L No.010.00.01.001 Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) Hammer Mills Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cagecheck 2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Information Year of construction1999 Mounted on framecheck With switchcheck With switchgearcheck Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a ...

General SKU296U566 LocationBarneveld MakeWAB Bachofen TypeKD 45 D No.971227 Year of construction1997 Main Features Volume46 Ltr. Motor44 KW Specified Features - Sand mill MaterialNickel alloy (201) 2.4068, stainless steel 1.4721(heat resistant) Horizontal sand millcheck Capacity46 Ltr Housing dimensions Dia:300x790mm InletDN15 OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor44 kW, 380 volt, 1465rpm(ex) Rotor speed730rpm Without ballscheck Capacityrange 180-1000 l/h Information Total height1,9 m Weight1560 kg Floorspace1,85x1,15 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKULU005 LocationNetherlands MakeHerbold Main Features Motor110 KW Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Information With control cabinetcheck Floor space10,9x7,3 m Total height7,3 m CEcheck Extra SpecificationsThe system comprises a range of specialized machinery tailored for plastic processing and material separation: 1. Granulator (Type SMS 45/60-H5-3): This machine is equipped with a cutting chamber, rotor, and high-quality blades for size reduction. It also includes an extraction system for efficient operation. 2. Air Separation Unit (Type SZS2 450/150): Featuring an air stream separator and adjustable air flow, this unit efficiently separates light materials. It is complemented by a rotatory lock and a suction unit for enhanced performance. 3. Buffer Bunker with Screw: Serving as a material buffer, this component has indicat ...