cd used for sale

Heidelberg CD 102-6+LX. AGE. 1996, Impr. 301 mil, CPC 1-04, Preset, Autoplate, Alcolor, Technotrans, All wash up devices, Ink temperature control, Air Transfer, Extended delivery, IR Dryer, Coating unit Anilox system, Powder Graphix, Air-cooled

Metal lathe Mammut CD6250B, good condition, built in 2006, standard equipment, 6 kW, 1500 mm center width, 250 mm center height, 2000 kgPrices subject to change, errors, printing and typesetting errors excepted

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Manufacturer: Bahco, hydraulic pulling cylinder type CDXR 50-125 -Traction force: approx. 50 t -Stroke: 125mm -Piston rod: Ø 50 mm -Operating pressure: max. 800 bar -Recordings: inside 150 x 50 mm, see photos -Number: 1x cylinder available -Dimensions: 925/125/H165 mm -Weight: 32 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD250B40/28-100 -Stroke: 100 mm -Piston rod: Ø 28 mm / M16 x 1.5 -Hole: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 88 x 400 mm -Weight: 5.9 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Rexroth, double-acting hydraulic cylinder, stroke 600 mm -Type: CD70G50/36-600 Z10/01HFDM2-2T -Art.No.: 891467 -Piston rod: Ø 36 mm -Holes: Ø 20/12 mm / Distance: retracted 850 mm -Dimensions: 895/65/H110 mm -Weight: 11.6 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N25-80C-B -Stroke travel: 80 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 220/30/H52 mm -Weight: 0.3 kg

2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N25-50C-B -Stroke travel: 50 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 190/30/H52 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N20-50C-B -Stroke travel: 50 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 180/24/H48 mm -Weight: 0.2 kg/pc.

VERTICAL COOKER WITH PNEUMATIC OPENING, IN WATER OR BRINE, MECALSA TYPE: MC CDA-2 Technical description: Material: Stainless steel Aisi-304 Heating: Steam/hot water in internal coil Opening: Pneumatic Power supply: 220 V – 50 Hz Capacity: 2 baskets Internal diameter: Ø 1227 mm Outer diameter: Ø 1284 mm Height: 1300 mm

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

LARA SHEAR CDCH-1400 (year 2018) With a tow table. Hydraulic shear designed for the cross-cutting of strip and management of sheet metal surplus in coil feeding lines. It is supplied together with a feed table, allowing a comfortable and safe evacuation of the cut material and maintaining a clean and continuous production process. Robust equipment, of heavy industrial construction, especially suitable as auxiliary equipment in cutting, stamping or coil feeding lines. Work materials -Carbon steel -Stainless steel -Aluminum and light alloys Main technical data - Maximum working width: up to 1,400 mm -Drive type: hydraulic -Working pressure: 4–6 bar (pneumatic control system) -Power supply: 400 V / 50 Hz  

CDM VIBRO CLASSIFIER FOR GRANULATES, Constructed in 2003, 8 mm holes on 1st screen, Users manuals, drawings, CE., Available RECONDITIONED, (pictures show the machine prepared for optimizing transport), See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: RUNNING

lifting capacity: 3,5 to. : ja : ja : 80 % stroke: 3,5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

offered is a forklift from the manufacturer Anhui Heli from 7/ 2021. The forklift was used little after purchase, which caused the traction battery to be deeply discharged. This would have to be replaced, which was taken into account accordingly in the purchase price. Technical data: Manufacturer: Anhui Heli Co. Ltd Model No.: CDD12J Serial No.: 08012JL280 Capacity: 1200 KG Max. height: 3000 mm Fork length: 1070mm Weight: 488 KG Year of manufacture: 7/ 2021 The forklift is currently at our customer in Magdeburg and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty a ...

This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine.

weight of the machine ca.:4 t

Key data: 22 , 8 , 2

Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

Gelulleuse MACOFAR for CD20-type powder, Sold with 3 powder formats: 00, 0 and 1, Maximum theoretical speed: 20 000 / hour, 50Hz / 2.5kW, Net weight 800kg, Sold with its vacuum pump, Elec:: 3+N+P, Link to manufacturer: .romaco/products/product-details/cd-series

The dimensions of the machine are LxWxH 2500mm x 1600mm x 2500mm. The weight is 8250kg. The machine is in a little-used condition.

Automatic container orienter made of stainless steel by CDA France, XL model. The equipment has a hopper with an automatic elevator for the reception of the containers, orients them through the internal positioning system and delivers them correctly aligned on a conveyor for automatic feeding to the production line. Configured for 10 ml PET containers, although it can be adapted to other formats using change kits supplied by the manufacturer. Technical characteristics Redresseur model by flacons XL Year of manufacture 2023 Motor 1.5 kW 220 V 50 Hz In your state

15 electric motors from various manufacturers are offered. 1) 2 × SEW-Eurodrive R73 DT90L-4, power: 1.5kW. 2) Eurodrive AB R60 DT80K4/2B, power: 0.4/0.63kW. 3) Elektrim SF90S4, power: 1.1kW, weight: 125kg. 4) AEG. 5) Carl Bockwoldt CD2-71N/4D, power: 0.37kW. 6) K. W. Müller RD0KL 44U/max110KP, power: 0.09kW. 7) EMC Eldro ED30/5. 8) ZET DR 1.5/4-90L, power: 1.5kW. 9) Eberhard Bauer D143/146K. 10) Groschopp DM80-60, power: 4kW. 11) Flender Himmel SP0-G63/L, power: 0.18kW. 12) BBC QU X160 M2 BG, power: 15kW. 13) ATB Antriebstechnik A160L/4E-21, power: 15kW. 14) Georgii-Kobold KLB424V, power: 0.10kW. Inspection is possible by prior arrangement.

Second-hand jacketed stainless steel reactor. Equipped with a propeller-type agitation at different heights. Motor 2.2 kW 400 V 50 Hz 1,410 rpm Working conditions ATEX Heating and cooling Heat Burning Shirt Orientation and installation Vertical No legs In your state

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 € : 643.67 € : Doppelsäulenführung : 6300 x 41 x 1,3 mm : 15 - 120 m/min : 440 mm : 440 mm : 640 x 440 mm : rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm : 1.1 kW : 4 kW : 0.12 kW : 3150 mm : 1850 mm : 2115 mm : 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160 to : 400 mm : 1000x680 mm : 1000x740 mm : 765 mm : 250 mm/s : 10-20 mm/s : 22 kW : 2400 mm : 1525 mm : 3900 mm : 10500 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 750x615 mm : 630 mm : 300 mm/s : 10-25 mm/s : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 100 to : 400 mm : 850x630 mm : 850x640 mm : 685 mm : 250 mm/s : 10-20 mm/s : 11 kW : 2030 mm : 1150 mm : 3565 mm : 7700 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 64000 € : 1209.6 € : 80 to : 900 mm : 540 mm : 180 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 280 mm : 380 mm : 7.5 kW : 2010 mm : 1390 mm : 2750 mm : 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ASTEC CDH-3 A ist eine Startloch-Erodiermaschine mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Daten: 3 Achsen; Tisch 500×360 mm, max. 300 kg; Verfahrwege X300 Y200 Z200 mm; Abstand Tisch-Pinole 220 mm; Wanne 820×550 mm; Elektroden Ø0,2–3,0 mm. Technik: Generator 40 A; Gesamtleistung 4,5 kVA; Netz 50 Hz 3x 200–440 V; Gewicht ~900 kg; Abmessungen 1200×1600×2000 mm; Wanne 20 l. Geeignet für enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 € : 849.95 € : 1 : 40 to : 4 mm : 630 mm : 450 mm : 160 mm : 3 - 75 mm : 154 1/min : 420 x 275 mm : 8 : 75 mm : 40 mm : 230 mm : 293 mm : 4 kW : 1174 mm : 1540 mm : 2200 mm : 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Front light guard Vibration pads User Manual in German with CE Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Dalian CDS6241

A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control o ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 € : 1181.25 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7.5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 € : 1328.67 € : 110 to : 900 mm : 540 mm : 180 mm : 14 - 114 mm : 60 1/min : 490x325 mm : 90 mm : 280 mm : 7.5 kW : 1870 mm : 1320 mm : 2800 mm : 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 € : 1510.11 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 € : 1848.42 € : 160 to : 1100 mm : 700 mm : 210 mm : 23 - 110 mm : 60 1/min : 630x400 mm : 8 : 95 mm : 65 mm : 325 mm : 480 mm : 2400 mm : 1430 mm : 3200 mm : 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 € : 2468.34 € : 200 to : 1200 mm : 740 mm : 220 mm : 24 - 140 mm : 50 1/min : 950x600 mm : 100 mm : 390 mm : 15 kW : 2350 mm : 1700 mm : 3435 mm : 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF:  9323 TON: 100 SCREW DIAMETER:  35MM SHOT WEIGHT: 140 STROKE VOLUME: 153CM3 INJECTION PRESSURE: 2057AR PLATEN SIZES:  620 X 620MM DBTB: 420 X 420MM MIN MOULD HEIGHT:  250MM MOULD OPENING STROKE:  475MM MAX DAYLIGHT:  725MM EJECTOR STROKE:  150MM CONTROLS: UNILOG TC 40 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 20 HEATING CAPACITY: 8.9KW SCREW DRIVE:  HYDRAULIC

Technical specifications: Manufacturer: FLENDER Type: CDA 250 Series: BA 6610TU (worm gear) Drive speed: 917 rpm Output speed: 12.4 rpm Side: Ascending to the right Wavelength: 105 mm Shaft diameter: 65 mm

Pressure:250 t throat:450 mm stroke:8 - 135 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:635 mm table surface area:1250 x 850 mm hole in the table:355 mm table height over floor:950 mm passage to the back:660 mm ram surface:790 x 610 mm ram adjustment:120 mm power requirement:18,5 kW weight:14,0 t Dimensions (WxDxH):1,5 x 2,8 x 3,65 m German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

Robust and fully equipped Mercedes-Benz Sprinter 519 CDI 3.0 CDI V6 from 2018, from professional use and extremely suitable as a service vehicle, mobile workshop, intervention vehicle or technical commercial vehicle. This heavy Sprinter is equipped with the powerful and sought-after 3.0 CDI V6 diesel engine of 2,987 cc, good for 140 kW / approx. 190 hp, in combination with a 6-speed manual gearbox. Thanks to its GVW of 5,000 kg and its spacious high cargo space, this vehicle offers a sturdy and versatile base for professional use. The cargo area is practically furnished with metal racks, shelves and storage systems and is accessible via a wide side sliding door and double height rear doors. At the back is a heavy step mounted. In addition, the vehicle is equipped with a Rockinger drawbar, signalling lights, orange beacons, additional work lights and red and white safety marking. The cab  ...

Te Koop: Mono pomp R Moneau s patent Type CD901R Nr: 30/70/31347/3 Input: 100MM Output 165 MM 20 M3 / uu.

Pressure relief valve, hydraulic valve ORSTA CDS 16 - 2 - 02 TGL 10947 used, tested ! Dimensions: 170 x 80 x 45 mm

Pressure relief valve, hydraulic valve ORSTA CDS 16-3-02 TGL 10947 Nominal pressure: 16 MN/m² used, tested ! Dimensions: 140 x 45 x 45 mm

Hydraulic Cylinder REXROTH CDT3ME6/ 63/ 45/ 0750 ( CDT3ME6/63/45/0750 ) Z10/B1HFDMWW 00991192 A114-276 stroke: 750 mm Rod diameter Ø 45 mm New ! Dimensions: 1050 x 150 x 90 mm

Hydraulic Cylinder REXROTH CDT3ME5/25/12/0190Z10/B1HHDMWW 006574120010 stroke: 190 mm rod diameter Ø 12 mm Dimensions: 325 x 75 x 65 mm