We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,318 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description hopper capacity: 900 dm3 fans power: 2 x 0.5 kW temperature range: 50 - 140 C heating power: 18 kW
used
Description hopper capacity: 100 lt air flow: 90/20 m3 / h temperature range: 50-150 C absorbed power: 6.2 Kw power supply: 400 V
used
Description hopper capacity: 30 Lt temperature range: 0 ° -140 ° C power: 3 Kw 400 V power supply
used
Description Pressure Max 16 Bar refrigerant R 22
used
I sell the wood dryers NARDI for 30m3 wood. Control panel Nardi, a savings computer. Volume net wood 25-30 m3. 4 fans side by side Chamber 9x4x h.3m Door on each side, flow system. Without rails. Condition very good, worked very little Car, electrics and fans without any problems. Available same. Already dismantled.
used
Feed rate: 5-25m/min.
used
System consists of four CTT 300 and three TT 100, capacity: 4x 200/ 3x 100l, connected load: 1.6kW.
used
Hopper capacity: 600l, connected load: 17kW, length: 820mm, width: 820mm, height: 2455mm, weight: 490kg.
used
Coolant: R 22, charge: 2.5t, operational pressure: 13bar, was maintained by the manufacturer.
used
Air pressure: 0.1-1.2Mpa, air pressure: 60°C, weight: 450kg.
used
Volume flow: 470m³/h, operational overpressure: 7-16bar, coolant: 407c, connected load: 1.48kW.
used
Max. working pressure: 16bar, ambient temperature: 3-50°C.
used
Plastic dryers - Arburg Thermolift 100-2 Year of construction: 2000 Drying of plastic with hot air Capacity: 100l Heating capacity: 4.5 kW Weight: 130 kg Built-in vacuum pump for automatic conveying of the plastic Price: On request
used
The drying/conveying system for plastic - Motan Metrolux A80 Year of construction: 2017 Drying plant for plastic with 1 independent silo Warm air generator with a doubled molecular sieve Power: 13.7 kW Heating capacity: 10.5 kW Capacity: 80 m³/h Touch control panel Hermetically insulated silo with a capacity of 300 litres Silo has heating function and function of temperature maintenance Price: On request
used
Operational pressure: 16bar, Leistung: 5,7kW.
used
Plastic dryers - Arburg Thermolift 100-2 Year of construction: 1994 Drying of plastic with hot air Capacity: 100l Heating capacity: 4.5 kW Weight: 130 kg Built-in vacuum pump for automatic conveying of the plastic Price: On request
used
used
Volume flow: 186m³/h, temperature: -10 to 120°C.
used
Volume flow: 21.6m³/min, operating overpressure: 7bar, length: 1100mm, width: 1028mm, height: 1829mm, weight: 1.275t, with documentation, an on-site inspection is possible.
used
Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.
used
Electric scrubber drier, floor cleaning machine DEAWOO type DAFL50A Fabr. No. 22DW01702ALE01-00028 Year of construction 2022 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume Pure water: 50 litres Tank volume Waste water: 50 litres Noise pollution 66 dBa Climbing capacity 2% Battery voltage 24 Volt, 100 AH - Battery charger 24 Volt- Battery 24 Volt , 100 AH - one cleaning brush - two separate tanks - without drive, the device is pushed by hand Dimensions L x W x H 1275 x 850 x 1350 mm Empty weight 160 kg very good condition, as good as new; used
used
Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S.
used
- Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1.300 mm - Working height 870 + - 20 mm - Max. part height ~ 70 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor 1 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 95 mm - Feed speed adjustable 5 - 25 m/min - Length 1.500 mm + 500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 12,56 kW - Voltage fluctuation max. +/- 5 %
used
- Producer Giardina - Type GST 1400/2 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Installation length 3000 mm - Location - Voltage fluctuation max. +/- 5 %
used
- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200
used
- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200
used
- Producer Venjakob - Year of construction 2001 - Working width 1300 mm - Max. part height ~ 120 mm - Length of flash off tunnel 5500 mm - Supply air exhauster - Exhaust pipe 355 mm - Roller transportsystem - Roller diameter 80 mm - Roller pitch 150 mm - Length conveyor 5500 mm - Feed speed infinitely adjustable 2 - 10 m/min - Colour 7035 - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen
used
- Producer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of construction 2007 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Max. part height 70 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp max. 120 W/cm - Electic capacity lamp infinitely variable - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 86 A / 36,4 kW - Voltage fluctuation max. +/- 5 %
used
- Producer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1.300 mm - Working height 940 + - 20 mm - Length of flash off tunnel 3.800 mm - Fresh air 100 m³/h - Exit air ~ 500 - 1000 m³/h - Circulation air ~ 3.000 m³/h - Drying temperature ~ 30 Grad - Air speed 0,5 - 2 m/s - IR-tube emitter 12 Stk. - Power IR tube emitter 12 x 1,5 kW - Transport belttransport - Length 4.000 mm - Location, in stock - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 % - control cabinet with Touch-Screen mit neuer Siemens Steuerung 1 Stk.
used
Manufacturer: Henny Penny Type: HC-934 External dimensions: 460 x 620 x 550 mm. 230V / 0.8kW. Three drawers. Digital timer. Heating methods: Mode A: 74°C Mode B: 85°C
used
- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200
used
- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200
used
Trocker in retrofit version and with new Siemes S7-1200 control cabinet with touch panel. - Producer Cefla - Year of construction 1999/2022 - Working width 1.300 mm - Number of pallets 5 Stk. - Palettenlänge 7.470 mm - Useable pallet length 7.200 mm - Max. part height ~ 50 mm - Clearance height between the pallet 60 mm - Max. part length 7.200 mm - Fresh air 3.000 - 9.000 m³/h - Exit air 3.000 - 9.000 m³/h - Heat output ~ 45 kW - Drying temperature 30 Grad (optional 60) Grad - Incl. heat exchanger - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 9.600 mm - Width 3.300 mm - Height 2.650 mm + 900 mm - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - With switch cabinet - Ohne Stellventile und Wasserpumpen
used
verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen
used
- Producer Venjakob - Type VEN DRY RZG - Working width 1300 mm - Max. part height 80 mm - Length of flash off tunnel 5000 mm - Volume flow air 5000 m³/h - Heat output 82 kW - Drying temperature 45 Grad - Incl. heat exchanger 90/70 Grad - Transport belttransport 5.200 mm - Location, in stock - Voltage / HZ 400 / 50
used
- Producer Cefla/Sorbini - Type Ecolight - Year of construction 2000 - Working width 1.300 mm (1.445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Width 2.300 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 38 kW - Voltage fluctuation max. +/- 5 %
used
For wine and sparkling wine bottles 6000 bottles Type: WD/ 12 capacity / hour ca.:10000 More then 300 machines new and second hand on our seema .de
used
Manufacturer: Giardina 4 Zonen Trockner, Year: 2007, Control: SPS TX 37, Work piece width min-max mm: 100-1320, Min.-max. workpiece length in mm: 300-3500, Min.-max. workpiece height in mm: 6-70, Working widht max mm: 1320, Number of pallets: 92, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Lichte weite Paletten: 115, Tragfähigkeit Palette kg: 180, Palettenausmass LxBxH mm: 3665 X 1400 X 90, Trockenzonen: 4, Abluftzone 1 Abluftmenge m/h³: 6000, Heizregister 1 kcal/h³: 30000, Trockenzone 2 Abluftmenge m/h³: 4000, Heizregister 2 kcal/h³ : 57000, Trockenzone 3 Abluftmenge 3 m/h³: 4000, Heizregister 3 kcal/h³ : 57000, Kühlzone 4 Abluftmenge 3 m/h³: 8000, Heizregister 4 kcal/h³ : Möglich 57000, Feeding speed m/min: 3-5, Conveyor/Conveyor belt: Stange, Heizmedium Warwasser: 3 X Viessman 60 kw Gastherme, Max.Temperatur Grad: 50, Damper register - items: ...
used
Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995
used
Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020
used
Manufacturer: Purete, Type: PRT-I1606, Year: 2020 neu, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300 , Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 18, Position of lamps: gerade, od distance mm: 38,7, Working hight approx mm: 900, Feeding speed m/min: 5 - 20, Rod transportation: yes, Length mm: 6.000, Drive power kW: 1,5, Conveyor lenght mm: 6.000, Required space L x W x H mm: 6.000 x 1.850 x 1.750, Year :2020 neu
used
Manufacturer: Bürkle IR Trockner 2 Sektionen, Year: 2001, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Number of lamps: 2 X 8 Stück, Power per lamp: ca. 3,4 kw, Working hight approx mm: 980, Feeding speed m/min: 10-30, Belt transport: yes, Rod transportation: yes, Drive power kW: 0,75, Conveyor lenght mm: 2 Stück ca.3000, Thermal output: ca.70-90 Grad, Type of radiator medium wave: yes, Leistung je Strahler kW: ca. 3,4 kw, Year :2001
used
Manufacturer: Rippert Düsentrockner, Type: DTK 041, Year: 2004, Work piece width min-max mm: 800, Channel length in mm: 7000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 50, Umluftleistung m³/h: 4600, Ex geschützt: no, Temperature regulation: yes, Min.-max. workpiece height in mm: 60, Conveyor lenght mm: 8000, Feedin speed m/min: 1-6, Belt conveyor: yes, Air speed in jets: 25 m/s, Flat spray nozzle: yes, Damper register - items: 1, Year :2004
used
Manufacturer: Rippert, Type: IR Vorwärmodul, Year: 2005, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Number of lamps: 6, Position of lamps: gerade, Power per lamp: ca.3, od distance mm: ca.80, Feeding speed m/min: 3-15, FREE TEXT: Lampen müssen erneuert werden, Year :2005
used
Manufacturer: Venyeskob, Type: Mikrowellen Trockner, Year: 2007, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Length mm: ca 6.774, Channel length in mm: 6000, Revisionsklappen: yes, Kanaltemperatur Grad: ca 30°C, Umluftleistung m³/h: 3.000, Ex geschützt: no, Working widht max mm: 1300, Working height in mm: 95, Conveyor lenght mm: 6800, Through running hight mm: 100, Belt conveyor: yes, Electrical power consumption kW: 13, Year :2007
used
Manufacturer: VEN DRY COLLECT 10-ETAGEN TROCKNER, Year: 2014, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 4.700, Min.-max. workpiece height in mm: 150, Number of pallets: 10, Working widht mm: 1.300, Conveyor lenght mm: 10 X 4.700, Feedin speed m/min: 3 - 15, Conveyor/Conveyor belt: Band, Heating register qty: 1, Fresh air m³/h: 2.500, Damper register - items: 1, Fresh air m³/h: 2.500, FREE TEXT: Temperatur 15-50 Grad inkl.Heizregister, Year :2014
used
Manufacturer: Rippert, Type: DTK 7000, Year: 1995, Work piece width min-max mm: 1300, Channel length in mm: 15.000, Kanaltemperatur Grad: 56 / 70, Umluftleistung m³/h: 2 x 8.650, Abluftleistung m³/h: 2 x 780, Raumluft m³/h: 2 x 780, Mischluftventilator kW: 2 x 7,5, Thermal output: 2 x 36, Belt conveyor: yes, Air speed in jets: 25, Max. air temperature: 56 / 70, Heated by: Wasser, Damper register - items: 2, Solvent quantity g/min: 2 x 12.390, Year :1995
used
Manufacturer: Venyeskop, Type: DTK, Year: 1989, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300-4500, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 300, Conveyor lenght mm: 16000, Through running hight mm: 80, Feedin speed m/min: regelbar, Belt conveyor: yes, FREE TEXT: inkl. Transport Einlaufband 4000 mm, Year :1989
used
Manufacturer: Purete, Type: PRT-I1613, Year: 2020 neu, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300 , Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 18, Position of lamps: gerade, Power per lamp: 23,5, od distance mm: 38,7, Working hight approx mm: 900, Feeding speed m/min: 5 - 20, Rod transportation: yes, Length mm: 6.000, Drive power kW: 1,5, Conveyor lenght mm: 6.000, Leistung je Strahler kW: 1,2, Required space L x W x H mm: 6.000 x 1.850 x 1.750, Year :2020 neu
used
Manufacturer: Purete, Type: PRT-I3613, Year: 2020 neu, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Channel length in mm: 6.000, Revisionsklappen: yes, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Conveyor lenght mm: 6.000, Feedin speed m/min: 0 - 20, Rod transportation: yes - 38,7 mm, 1st Damper register kW: 36, Electrical power consumption kW: 44, FREE TEXT: Heizung über Elektro - auf Anfrage über Wasser und Öl möglich, Year :NEU