cd dryer used for sale

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

The system was in production until February 2025.

This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine.

PLUNGE EDM MACHINE CDM ROVELLA MODEL: BF600 STROKE X: 600 MM STROKE Y: 400 MM STROKE Z: 350 MM CONTROL: HEIDENHAIN SUPPORT SURFACE: 800 X 550 MM TUB SIZE: 1400 X 870 X 500 MM

PLUNGE EDM MACHINE CDM ROVELLA MODEL: ZENIT P1 STROKE X: 1500 MM STROKE Y: 1000 MM STROKE Z: 500 MM C AXIS 10-POSITION TOOL CHANGER MAX ELECTRODE WEIGHT: 2,500 KG MAX. WORKPIECE WEIGHT: 12,000 KG SUPPORT SURFACE: 2000 X 1200 MM TUB SIZE: 3000 X 1500 X 1075 MM CONTROL: HEIDENHAIN MOD. 406

Plunge EDM CDM ROVELLA mod. Eldis 3.40 Features: X-axis: 400 mm. Y-axis: 300 mm. Z-axis: 200 mm. Table length: 650 mm. Table width: 400 mm. Weight: 1,400 kg.

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

KOMA CDS SunRiser refrigeration and proofing machine Internal dimension length 340cm x width. 240cm x H 250cm External dimensions length 350cm x width. 260cm x H 270cm

Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:

CDM VIBRO CLASSIFIER FOR GRANULATES, Constructed in 2003, 8 mm holes on 1st screen, Users manuals, drawings, CE., Available RECONDITIONED, (pictures show the machine prepared for optimizing transport), See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: RUNNING

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

CDM PREALPINA RECYCLING EXTRUDER, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam., Constructed in 2006, crammed feeding unit, extruder 130 mm., a.c. 283 kw drive, one degassing pump 5,5 kw, semi-automatic, non-stop hydraulic screen changer 230 mm diam.screens, hydraulic power station, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine reconditioned, installed power - used power in work: about 60-65% : 283, options available: different pelletizer, with or without buffer silo, with blower + bag filling station with vertical mixer, capacity: 500-600 kg/h depending on material and feeding rate, conditions: reconditioned (or as is)

Automatic container orienter made of stainless steel by CDA France, XL model. The equipment has a hopper with an automatic elevator for the reception of the containers, orients them through the internal positioning system and delivers them correctly aligned on a conveyor for automatic feeding to the production line. Configured for 10 ml PET containers, although it can be adapted to other formats using change kits supplied by the manufacturer. Technical characteristics Redresseur model by flacons XL Year of manufacture 2023 Motor 1.5 kW 220 V 50 Hz In your state

PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

Mercedes-Benz Vito 110 CDI L2 – 2021 Mercedes-Benz Vito 110 CDI sheet metal van, first registered on 16.08.2021, equipped with a 1,950 cc diesel engine with 75 kW (102 hp), combined with a 6-speed manual transmission and rear-wheel drive transmission. The vehicle has 71,460 km on the odometer. It is configured as a 3-seater with a comfortable cab including a Mercedes multimedia screen, Bluetooth, air conditioning, multifunction steering wheel, electric windows and mirrors. The cargo area is equipped with a metal partition wall, full wood panel cladding, floor tie-down rings and LED interior lighting. It has a straight sliding side door and double rear doors, making loading and unloading easier. The bodywork is in good general condition and shows only normal traces of use consistent with its professional use. The interior is clean and the upholstery is in good condition. The tyres sh ...

Mercedes-Benz Sprinter 317 CDI L3H2 – 170 hp – Automatic transmission Mercedes-Benz Sprinter 317 CDI in good general condition, first put on the road on 03/12/2024, equipped with a 1,950 cc diesel engine developing 125 kW (170 hp), compliant with the Euro 6e standard. Vehicle with 58,284 km on the odometer. Utility version with 3-seater cab, automatic transmission, multifunction steering wheel, Mercedes multimedia display, air conditioning, Start/Stop, overhead storage compartment and complete partition wall. The load compartment is fully protected by side panels and a wooden floor. Presence of lashing rings, interior lighting, sliding side door and hinged rear doors. The vehicle is equipped with a hitch with Rhino TowStep step. Overall clean condition. The bodywork shows only normal signs of use, including a slight dent on the right side panel, a few small scratches on the driver ...

Mercedes-Benz Sprinter 317 CDI L3H2 – 2022 – 161,498 km Mercedes-Benz Sprinter 317 CDI in good general condition. Belgian commercial vehicle equipped with a 3-seater cab and a large load area fully clad in wooden panels with reinforced floor and lashing rails. The vehicle is equipped with air conditioning, a Mercedes multimedia system with Bluetooth, cruise control, a multifunction steering wheel, electric windows, start/stop start, a sliding side door, a glass partition wall and lighting in the cargo area. The load compartment is in good condition and shows only normal traces of professional use. The Michelin Agilis 3 tyres are in good condition. Status Slight depression on the right side of the sill. Tear on the side of the driver's seat cushion. Normal signs of use on the rear step. Normal traces of use in the cargo area. Features Brand: Mercedes-Benz Model: Sprinter 317 CD ...

Mercedes-Benz E-Class 200 CDI Estate Avantgarde Start&Stop – 2013 Mercedes-Benz E-Class 200 CDI Estate (S212) Avantgarde from 2013, equipped with the 2.1 CDI OM651 engine and the 7G-Tronic Plus automatic transmission. Vehicle carefully monitored and having benefited from numerous maintenance and reliability works. Mileage body: 340,500 km upgradeable, mainly motorway. Engine and turbo: approx. 240,500 km, replaced by Mercedes. Duplicate keys. Equipment: heated and electric front seats, leather upholstery, Harman/Kardon audio system, dual-zone automatic climate control, bi-xenon directional headlights with adaptive lighting, NTG 4.5 GPS, Bluetooth, hands-free kit, voice commands, cruise control/limiter, detachable towbar, electric tailgate, semi-pneumatic rear suspension, fatigue detector, electric folding mirrors, defrosting and anti-glare, ambient lighting. Maintenance and wor ...

Hydraulic Cylinder REXROTH CDT3ME6/ 63/ 45/ 0750 ( CDT3ME6/63/45/0750 ) Z10/B1HFDMWW 00991192 A114-276 stroke: 750 mm Rod diameter Ø 45 mm New ! Dimensions: 1050 x 150 x 90 mm

Mercedes-Benz Sprinter 317 CDI L3H2 commercial vehicle, first registered on 31/10/2022, 2.0 CDI diesel engine of 125 kW (170 hp), automatic gearbox, Euro 6 standard, GVW 3,500 kg. Mileage recorded: 209,026 km. The vehicle starts and runs. No engine malfunction warning light observed on the dashboard during the inspection. Equipped with automatic air conditioning, Mercedes multimedia system (radio/Bluetooth), multifunction steering wheel, keyless start (Start/Stop), electric windows and electric mirrors. Cab in good general condition. The driver's seat has a tear in the seat. Fully plywood load compartment with reinforced floor, lashing rails on the walls, floor lashing rings, partition wall and side storage boxes. Bodywork in good general condition with normal traces of use. Presence of some scratches and small operating impacts, front left bumper rubbed, slight depression on the rear ...

Mercedes-Benz ML 320 CDI | 4MATIC | Automatic | Xenon | AHK | Leather | Registration date 04/2006 Highlights • Solid 3.0 V6 diesel (2987 cc) with 165 kW (224 hp) • All-wheel drive (4MATIC) – ideal for winter or trailer operation • Neat leather interior • Trailer hitch • Original Mercedes navigation system + automatic climate control • TÜV report possible on request • Ideal for export, workshop, craftsman or off-road conversion Vehicle data (according to note & pictures) Model: Mercedes-Benz ML 320 CDI (W164) Engine: 3.0 V6 Diesel, 2987 cc Power: 165 kW / 224 hp Drive: 4MATIC (all-wheel drive) Transmission: Automatic Registration date: 11.04.2006 Mileage: 303,405 km (photo proves it, see speedometer) Colour: Metallic grey Interior: Black leather (well maintained) Tires: Good, on original Mercedes rims Permissible total weight: 2,880 kg  ...

Te Koop: Mono pomp R Moneau s patent Type CD901R Nr: 30/70/31347/3 Input: 100MM Output 165 MM 20 M3 / uu.

Pressure relief valve, hydraulic valve ORSTA CDS 16 - 2 - 02 TGL 10947 used, tested ! Dimensions: 170 x 80 x 45 mm

Pressure relief valve, hydraulic valve ORSTA CDS 16-3-02 TGL 10947 Nominal pressure: 16 MN/m² used, tested ! Dimensions: 140 x 45 x 45 mm

Hydraulic Cylinder REXROTH CDT3ME5/25/12/0190Z10/B1HHDMWW 006574120010 stroke: 190 mm rod diameter Ø 12 mm Dimensions: 325 x 75 x 65 mm

Hydraulic Cylinder REXROTH CD70C40/18-300,0Z11/1HBUM1-1T 0000288056 Piston diameter: Ø 40 mm stroke: 300 mm Rod diameter Ø 18 mm Dimensions: 440 x 85 x 65 mm

Pressure Relief Valve, Hydraulic Valve, Direct-Operated ORSTA CDS 16-2-02 ( CDS16-2-02 ) TGL 10947 Nominal Pressure: 16 MPa (160 bar) New ! Dimensions: 155 x 80 x 40 mm

Hydraulic Cylinder, Differential Cylinder REXROTH CD160C 32/ 14-0080 Z10/01HHDM11A ( CD160C32/14-0080Z10/01HHDM11A ) 00398761/0010 Piston diameter: Ø 32 mm Rod diameter Ø 14 mm stroke: 80 mm New ! Dimensions: 235 x 70 x 70 mm

CDE Storage Tank Auction-ID: A1-48805-209

Hydraulic Cylinder, Differential Cylinder REXROTH CD210C40/25-100.0Z11/01HFDM1-1A 1003375687/0010 Piston diameter: Ø 40 mm Rod diameter Ø 25 mm stroke: 100 mm New ! Dimensions: 310 x 110 x 70 mm

Hydraulic Cylinder, Differential Cylinder REXROTH CD210D 40/ 25-300 Z11/01HFDM11A ( CD210D40/25-300Z11/01HFDM11A ) 00495237/0010 Piston diameter: Ø 40 mm Rod diameter Ø 25 mm stroke: 300 mm New ! Dimensions: 310 x 110 x 70 mm

Hydraulic cylinder, differential cylinder REXROTH CD210G 80/ 56-0175 Z11/01HBDM22A 00797267/0010 piston diameter: Ø 80 mm rod diameter Ø 56 mm stroke: 175 mm New ! Dimensions: 490 x 115 x 120 mm

Hydraulic Cylinder, Differential Cylinder REXROTH CD210B 50/ 22-0175 Z11/01HFDM11A 411500/2 Piston diameter: Ø 50 mm Rod diameter Ø 22 mm stroke: 175 mm New ! Dimensions: 470 x 80 x 90 mm

Hydraulic Cylinder PARKER CDD-3LRL24MC ND 21333-01 Series 3L Piston diameter: Ø 50,00,000,000,000 8 mm rod diameter: Ø 35 mm stroke: 550 mm pivot: Ø 35 mm New ! Dimensions: 750 x 130 x 76 mm

Pneumatic cylinder PARKER CDD-2AR14MC NC19443-10 series 2A stroke: 110 mm Rod diameter: Ø 16 mm Swivel pin: Ø 25 mm New ! Dimensions: 255 x 115 x 65 mm

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 240-320 kg/h (depending on material and feeding rate), Total installed power 104 kw d.c.380 V 50 H 3Ph (65% used in work), including:, scrap silo with extraction screw, crammed feeding unit, extruder with heaters and vents,, 85 mm Ø screw 35 L/D (reconditioned to 100% performances), vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer complete with hydraulic pack, water ring pelletizer, drying centrifuge, new electric cabinet, CE compliance, User’s manuals, Electrical drawings, This line is offered fully RECONDITIONED, availability: about 10 weeks from confirmation, capacity: 240-320 kg/h, INSTALLED POWER: 104 kw

Specifications Object: capsule/tablet counting machine Brand: LGA Model: CD5 Serial Number: 02021528 Application: Automatic counting and dosing of capsules into packages or storage bins Version: compact table model Housing: stainless steel Equipped with stainless steel feed hopper Transparent rotating dosing/counting disc Digital LCD display Programmable number via numeric control panel Adjustable processing speed Output via stainless steel drainage channel CE marked Includes separate transparent counting disc, guides, spout parts, Allen key and other accessories Includes user documentation, parts overview and declaration of conformity The machine switches on and the display and control menu respond, as shown in the video Not tested with capsules under production conditions Used condition with visible signs of wear and scratches Year of construction: not to be determined with certainty;  ...

CDR - CiderLab MLB242 - (2021) - (without external power supply) Instruments for analytical quality control of various types of foodstuffs Auction-ID: A1-49883-300

CDR - CiderLab SLB222 - (2023) Instruments for analytical quality control of various types of foodstuffs Auction-ID: A1-49883-238

Type: F7 Variant: 3002 Version: 5FARB3 Category: N1 – commercial vehicle Body: pickup truck First registration: 29/11/2016 Fuel: Diesel Displacement: 1,598 cm³ Engine: Renault R9M A4 Number of cylinders: 4 Power: 85 kW / 115 hp Maximum power speed: 3,500 rpm Gearbox: Manual Transmission: Front Wheel Drive Maximum speed: 168 km/h Environmental standard: Euro 5 M CO₂: 170 g/km Color: Black Number of doors: 5 (1 left, 2 right, 2 rear) Number of seats: 3 The 1.6 CDTI engine with 85 kW corresponds well to the 115 hp version, with 4 cylinders and 1,598 cc. Dimensions and weight Length: 4.999 mm Width: 1.956 mm Height: 1.951 mm Wheelbase: 3.098 mm Indicated unladen weight / in running order: 1.740 kg Actual weight: 1.901 kg MMA: 2.740 kg Maximum mass of the set: 4.740 kg Braked trailer: 2,000 kg Unbraked trailer: 750 kg Vertica ...

Mercedes-Benz Sprinter 214 CDI panel van, year of manufacture 2018. Equipped with a 2,143 cc 4-cylinder diesel engine with an output of 105 kW (approx. 143 hp), 6-speed manual gearbox and rear-wheel drive. Odometer reading: 163,236 km. Equipped with 3 seats, high roof, Webasto parking heater with digital control, air conditioning, radio/multimedia system with telephone function, electric windows, central locking, sliding door on the right, double rear doors and tow bar. Own weight 2,220 kg, GVW 2,800 kg and payload according to identification report 505 kg. Maximum braked towing weight 2,000 kg. Belgian registration papers and European certificate of conformity available. Inspection valid until 19/02/2027. Auction-ID: A3-46124-22050

Auction-ID: A1-49846-500

Viewing by appointment Auction-ID: A1-40311-49

Auction-ID: A1-40314-18

Well-functioning car Auction-ID: A1-47417-197

Auction-ID: A1-50225-148

Auction-ID: A1-50093-57

The car starts and drives without any problems. Documents available, see photos for further details. Auction-ID: A3-46164-4055

Mercedes vito; electric windows; Auction-ID: A1-47416-164