cd 102 used for sale

offer 22501 Technical data approx.: - working width 1020 mm - material thickness at 40 kg/mm² strength 1.5 mm -one. Backgauge adjustable up to 550 mm - front angle stop - Sheet metal hold-down - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile

High-frequency ignition device, heating, gas and oil burners, gas burner control unit, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer -Manufacturer: COFI, Ignition transformer -Type: 1020 -Dimensions: 100/65/H110 mm -Weight: 2.2 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt, belt conveyor -Speed: 6 m/min -Conveyor belt width: 130 mm -Conveyor belt length: 1020 mm -Motor/Transmission: 0.18 kW -Dimensions: 1020/335/H285 mm -Weight: 19 kg

TECHNE MCS-102L 2-Position Magnetic Laboratory Shaker New equipment in its original packaging Reference : MCS-102L This magnetic stirrer is designed for optimal suspension cell culture and the use of micro-carriers. The MCS-102L accommodates 2 x 1 liter culture flasks Speed range from 0 to 80 rpm Soft start and stop for slow acceleration and deceleration Interval setting option Stainless steel stirrer platform with culture flask markings Designed to operate in an incubator up to 40°C and 95% relative humidity Type: magnetic, rotary Display: Analog Applications: of biological samples Rotational speed: Max: 80 rpm (503 rad.min-1) Min: 0 rpm (0 rad.min-1) Temperature range: 40°C (104°F)

GAS TURBINE : 16 MW ROLLS- ROYCE-AVON 1534-102L Manufacturer Rolls Royce Avon 154-102L Year of manufacture 1978 Over hauled 2008 Operating Hours : 2800 Base load 10 MW Peak load 16 MW Fuel Condition Dual Fuel (Diesel and Natural Gas) Overhauled and Upgraded in 2008 Running hours 2580 hours since overhauled in 2008 GENERATOR Manufacturer Voltage GEC TURBINE GENERATOR LTD. 13.8Kv at 60 hz, 11.5 kV at 50 hz Phase Frequency 3 60 hz at 1800 rpm or 50hz at 1500 rpm Coolant Air cooled GEAR BOX Manufacturer Type GEC Marine and Industrial Gear Ltd. HSG28WH Frequency Speed ratio Single reduction type 6500/1800 TRAILER ENCLOSURE The Unit is packaged on heavy duty road design purpose trailer and can be setup quickly. It’s with weatherproof acoustic enclosure and enclosure is completely assembled and mounted over the trailer ...

Windscreen, windscreen for forklifts, forklift windscreen -Manufacturer: Toyota, windshield for forklifts with frame and wiper blades -Image/Dimensions: see photos -Transport dimensions: 1040/1020/H130 mm -Weight: 22 kg

Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

Test bench for power up to 2.2 KW Speed control Speed Switching Handheld remote control with cable for speed and rotation direction switching Data for converters see nameplate Connection cable CEE 32A Output CEE 16A Space requirement W - 600 x D - 650 x H - 1,750 mm rollable Weight approx. 85 kg

NUM 1020 T 131352 CNC control

The STUDER Internal Grinding Spindle Type 102560B 60,000 rpm is available for sale as a kit with accessories and tools as shown in the photographs. The set includes: STUDER Internal Grinding Spindle Type 102560B Different wheel chucks / accessories for internal grinding Tools and wrenches for assembly and adjustment Support and auxiliary elements Wooden box for storage and transport Condition: Used, from industrial machinery. Ideal set as a spare part or equipment for compatible STUDER grinding machines. The complete kit shown in the photographs is sold. For more information, price, measurements, compatibility or shipping conditions, please do not hesitate to contact us. Available for domestic and international shipping.

sheet width: 1020 mm plate thickness: 2,5 mm bending angle max.: 135 ° stroke of upper beam: 25 mm weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 102 x 50 mm Truss type: SLO 102|2 Agraffe: 5 HK Clear width: 1,450 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

sheet width: 1020 mm plate thickness: 2,5 mm distance between columns: 1050 mm daylight opening: mm : 135 ° total power requirement: Handbetrieben kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,4 x 0,6 x 1,3 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot melt / melter for packaging industry for sealing cartons ProBlue 4 1022230A Serial Number: SA06C26938

sheet width: 1020 mm plate thickness: 2,0 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing  ...

grinding length: 650 mm grinding width: 300 mm max distance spindle center to table surface: 550 mm cross travel: 310 mm longitudinal feed: 700 mm weight of the machine ca.: 1.8 t dimensions of the machine ca.: 3.0 x 1.87 x 1.9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg

sheet width: 1020 mm plate thickness: 2 mm distance between columns: 1020 mm bending angle max.: 135 ° total power requirement: 0 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1350 x 850 x 1175 m Max. bending angle 135° Manually operated with auxiliary spring on both sides. Upper beam opening 40 mm, Upper and lower beams segmented, Segment division: 25-30-35-40-45-50-75-100-150-200-270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Idra, used Special price Replacement column for IDRA 3300, D330mm x 7115mm, Trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. This column is therefore being sold at a very favourable price. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

YORK chiller type YLCC-H 102V In good condition Cooling capacity : 96,1 KW Nominal power :19,1 KW (x2) Power : 400 V - 3,5 Hz R407C Weight. : 1 133 kg

Dimensions (L/W/H): 0x0x0 mm Weight: 3500 kg Total power requirement: 57,7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x1000x845 mm Weight: 0 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alstom 3 Phase Cast Resin Transformer TTG 1020-4 transformer from 2002, complete (closed module). 1 available 21 KV / 400 V, 50 Hz Manufacturer: Alstom Model: TTG 1020-4 Type: Cast resin transformer Coil Material: Copper Serial Number: 425427/1 Power [kVA]: 1,000 Input [KV]: 21 / 20.5 / 20 / 19.5 / 19 Output [V, A, Hz]: 400 / 1,443 / 50 Around [kV]: 24 Rated current [A]: 28.87 Year of Make: 2002 Weight [kg]: 4.590 Dimensions LxWxH [cm]: 170 x 120 x 190

OIL HEATING Year: 2023 BUDERUS GE 615 921-1020 POWER 1020 KW BUILT IN 20 FOOT SEA CONTAINER So far only a few days trial run / as good as new !

General SKUR1059 MakeBausch &: Ströbel Maschinenfabrik (D) TypeKSF-1020 No.4755 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Motor0.25 KW Number of1 heads Specified Features - Capper Electric capacity2 kW Motor0.25 kW 380 Volt With conveyor beltcheck With cappercheck Number of closing heads:1 Cappers Single headcheck Rotating cappercheck For pilverproof capscheck For plastic capscheck Number of closing heads:1 With motor0.25 kW 380 Volt With vibratory feed bowl(2x) With conveyor beltcheck Belt width80mm MaterialStainless steel General With switchgearcheck Floorspace4,0x1,2 M Total height2,0 M Weight1500 Kg Extra Specificationswith additional format parts:Round 31.5mm, Round 50mm, Round 51.5mm, Round 67mm, Round79mm, Square 53mm, Square 53mmBottle feeding and sealing machine, without filling installationOils & fatGener ...

W&P rack oven type REC 1020 Year of construction 02/2017 (test laboratory) NAVIGO control Gas burners Ramp Hood

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz

CLOSING MACHINE BAUSCH+STROBEL KS-1025 Fully automatic intermittent-motion closing machine/crimper for vials and cylindrical glass, plastic or metal containers with up to two different types of closure. Includes separate electrical panel (300 kg, 800 x 600 x 2100 mm). Built in 1996. PRODUCTION - Output: up to 4200 units/h - Processable types of closure: rubber stoppers; droppers; screw caps; pilfer-proof caps and crimp caps; special closures with pipettes; pump spray assemblies; child-proof closures DIMENSIONS - Size (mm): 2200 x 1600 x 1800 ca. - Weight (kg): 1500 ca.

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, accumulation roller conveyor -double roller conveyor -each side: individually driven -Roll width: 1020 mm -Conveying length: 1300 mm -Diameter roller: 60 mm -Center distance: 130 mm -Admission axis: M12 -Height: 200 mm -Geared motor: 0.075 - 0.37 kW including frequency converter -Speed: 0.75 -17 m/min -Dimensions: 2250/1865/H200 mm -Weight: 394 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers with plastic attachment, diameter 65/89 mm -Transport width: 1020 mm -Quantity: 10x transport rollers available Price: per piece -Overall dimensions: Ø 90 x 1045 mm -Weight: 7.2 kg/piece / 1 pc. MA9018 6.6 kg

Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Hohner, Encoder rotary encoder -Type: 140P 1024 -Shaft: Ø 12 x 25 mm -Quantity: 1x encoder available -Dimension: 105/102/H102 mm -Weight: 1.2 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable winch -Cable winch: Load capacity 0.5 t -Hook path: 12.0 m -Dimensions: see photos / technical drawing -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Transnorm conveyor belt GF 1020-600-500 RA2473 Technical data: Conveyor length (NL): 1020 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1020 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individ ...

Lippert belt conveyor GF 10270-570-450 RA2489 Technical data: Conveyor length (NL): 10270 mm Frame width (NB): approx. 570 mm Belt width (GuB): 450 mm Overall height (BH): 130 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 19270 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie  ...

Connected load: 16kVA, control: FANUC Series 0-M, with carousel tool magazine, coolant system with external chiller HABOR Unit, spindle cooling, enclosed working area (full enclosure), handwheel (MPG) vorhanden, manual clamping devices on table and transformer separately in the control cabinet. On-site inspection is possible.

Centrifugal Pump Link Casing Pump Water Pump Fuel Pump Oil Pump Manufacturer: DICKOW PUMPEN Type: HZS 1023 Q: approx. 60 m³/h H: 45 m self-priming Connection approx. Ø 125 / 100 mm Engine: Ex Gesxchütz E EX de IICT 15 kW 1440 rpm 380/660 V Dimensions LxWxH approx. 1600 x 500 x 650mm The pump type is particularly suitable for systems where geodetic suction heights have to be overcome. For liquids that are free of solids and do not have too high viscosity. Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

sheet width: 1000 mm plate thickness: 1,0 mm distance between columns: 1030 mm daylight opening: 80 mm : 135 ° total power requirement: Handbetrieben weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,8 x 1,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bausch + Ströbel ESA 1025 high output self-adhesive labeling machine suitable for ampoules and vials, object diameter up to 36 mm, object height up to 140 mm, output up to 30,000 labels per hour, includes Allen hot foil coder, machine net weight approx. 1025 kg, includes format parts for parts for ampoules 1+2 ml. (ø 10.75 mm), 3 ml. (ø 12.75 mm) 5 ml. (ø 14.75 mm) and 10 ml. (ø 17.75 mm) and vials 8R (ø 22.00 mm) & 20R (ø 30.00 mm)

Altinisik Makina 1020 Flexographic Printer - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Altinisik Makina 1020 Flexographic Printer Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Altinisik Makina 1020 Flexographic Printer Price: 11250 EUR Download PDF Altinisik Makina 1020 Flexographic Printer The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16100 € : 309.12 € : 100 to : fix : 300 mm : 680 mm : 1020 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2350 mm : 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2.5 mm daylight opening: 48.0 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm weight of the machine ca.: 340 kg dimensions of the machine ca.: 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for t ...

sheet width: 1020 mm plate thickness: 2,5 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 2 ...

: gebraucht : WA0007 : 217 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 72800 € : 1375.92 € : Doppelsäulenführung : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 2.2 kW : 7.5 kW : 0.12 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0151 : 217 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.