135,929 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0314-028 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg
Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module, Connection Device Fieldbus -Manufacturer: Sick, fieldbus module for Profibus -Type: CDF600.0100 -Article number: 1041251 -Number: 44x modules available -Dimensions: 225/75/H50 mm -Weight: 0.6 kg/piece
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD70B25/16-320 -Stroke: 320 mm -Piston rod: Ø 16 mm / M16 x 1.5 -Hole: Ø 10 mm / distance 515 mm -Number: 1x cylinder available -Dimensions: 550/45/H70 mm -Weight: 2.7 kg
Sigmatek CDD082 C-DIAS digital bus module dot-matrix control Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. Feel free to call us.
Plunge EDM CDM ROVELLA mod. Eldis 3.40 Features: X-axis: 400 mm. Y-axis: 300 mm. Z-axis: 200 mm. Table length: 650 mm. Table width: 400 mm. Weight: 1,400 kg.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD200B40/28/50 -Stroke: 50 mm -Piston rod: Ø 28 mm -Hole: Ø 25 mm / retracted distance 360 mm -Dimensions: Ø 85 x 410 mm -Weight: 5.7 kg
Sigmatek CDI 163 C-DIAS digital bus module input module. Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.
Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: SMC, Compact cylinder type CDQMB12-30 -Stroke: 30 mm -Piston rod: Ø 6 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 62/25/H25 mm -Weight 0.1 kg/pc.
KOMA CDS SunRiser refrigeration and proofing machine Internal dimension length 340cm x width. 240cm x H 250cm External dimensions length 350cm x width. 260cm x H 270cm
Wood and green waste shredder Chippo 5010 CDT #234004 Specification: Category: Mobile Hacker Manufacturer: Komptech Hackbox hours: approx. 7,000 Mileage: 62 368 km Power: 397 kW / 540 hp Weight: approx. 30 500 kg Emission class: Tier 4 Final / Stage IV Chipper rotor with 12 blades Hackbox swivel MAN TGS 35.540 (540 hp) Crane Epsilon Q130ZD96, year of manufacture: 2014, max. weight: 4.010 kg 1 drum speed 400 rpm Transport weight: approx. 31 t Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
SPECIFICATIONS: Installed power: 1 kW Maximum pressure: 14 bar Ambient temperature: max. 43 C Refrigerant: R410A
1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDA Serial-No. HR-6462 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
WEBOMATIC CD110. A double-chamber vacuum packaging machine with shielding gas (MAP) in stainless steel design, built for continuous use, e.g. in butchers, butchers and the food industry. Technical data: Manufacturer: WEBOMATIC Model CD 110, 400 V Three-phase current, 50 Hz, approx. 2.2 kW Dimensions: approx. 1,150 x 900 x 1,000 mm (L×W×H) Weight approx. 325 to 400 kg depending on the version. Chamber size approx. 500 x 650 x 200 mm per chamber, 2 chambers, 4 victory bars à 500 mm cycle time approx. 15 to 40 seconds depending on the product and vacuum program, suitable for vacuum packaging with modified atmosphere (MAP). Ideal for butchers, meat and sausage manufacturers, delicatessen, fish processing, catering and gastronomy.
Heidelberg CD 102-4+L, Year of man: 1999 ( Installed 2000), Counter: 232 mil., CP 2000, Colour Fast Solution, Colour Booster, Autoplate, Alcolor Vario, Technotrans, Auto. impression wash up, Auto blanket wash up, Auto ink rollers wash up, Ultrasonic double sheet detector, Antistatic device, feeder and delivery, Preset Feeder and Delivery, Feeder Non Stop, Powder Exatronic Duo Plus, Coating unit Anilox Tresu system, High pile delivery, Atlas Copco compressor
Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:
2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...
Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.
VERTICAL COOKER WITH PNEUMATIC OPENING, IN WATER OR BRINE, MECALSA TYPE: MC CDA-2 Technical description: Material: Stainless steel Aisi-304 Heating: Steam/hot water in internal coil Opening: Pneumatic Power supply: 220 V 50 Hz Capacity: 2 baskets Internal diameter: Ø 1227 mm Outer diameter: Ø 1284 mm Height: 1300 mm
CDM VIBRO CLASSIFIER FOR GRANULATES, Constructed in 2003, 8 mm holes on 1st screen, Users manuals, drawings, CE., Available RECONDITIONED, (pictures show the machine prepared for optimizing transport), See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: RUNNING
Heidelberg CD 102-6+LX. AGE. 1996, Impr. 301 mil, CPC 1-04, Preset, Autoplate, Alcolor, Technotrans, All wash up devices, Ink temperature control, Air Transfer, Extended delivery, IR Dryer, Coating unit Anilox system, Powder Graphix, Air-cooled
Metal lathe Mammut CD6250B, good condition, built in 2006, standard equipment, 6 kW, 1500 mm center width, 250 mm center height, 2000 kgPrices subject to change, errors, printing and typesetting errors excepted
Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg
This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine.
Key data: 22 , 8 , 2
Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)
Lot 117: (2019) 250t Dirinler Eccentric Press High-Performance 250-Ton Precision Eccentric Press This Dirinler eccentric press represents the modern standard, offering a high-tonnage 2,500 kN capacity with advanced variable stroke rates ranging from 50 to 70 strokes per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 2500 P 81 Serial Number: 04 M 25 0010 A180114 R Year of Manufacture: 2019 Nominal Force: 250t Stroke Rate: 50 – 70 strokes/min Stroke Length: 4 – 140 mm Ram Adjustment: 100 mm Shut Height: 502 mm Plate Dimensions: 1,250 x 850 mm Max. Tool Weight: 1,058 kg Motor Power: 18.5 kW Operating Voltage: 400 V / 50 Hz Overrun Time: 172 ms Safety Distance: 275 mm Total Weight: approx. 19,178 kg
Lot 118: (2019) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160007A180149P Year of Manufacture: 2019 Nominal Force: 160t Stroke Rate (Variable): 60 – 85 strokes/min Stroke Length (Adjustable): 30 – 110 mm Ram Adjustment: 93 mm Distance Between Table and Ram: 480 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,460 rpm) Max. Permissible Upper Tool Weight: 187 kg Over-run Time: 158 ms Safety Distance: 252 mm Machine Weight: approx. 9,960 kg
Lot 119: (2019) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160007A180153R Year of Manufacture: 2019 Nominal Force: 160t Stroke Rate: 60 – 85 strokes/min Stroke Length (Adjustable): 30 – 110 mm Ram Adjustment: 97 mm Distance Between Table and Ram: 482 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,460 rpm) Max. Permissible Upper Tool Weight: 187 kg Over-run Time: 143 ms Safety Distance: 228 mm Machine Weight: approx. 9,960 kg
Lot 120: (2019) 160t Dirinler Eccentric Press High-Performance 160-Ton Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160007A180151P Year of Manufacture: 2019 Nominal Force: 160t Stroke Rate: 60 – 85 strokes/min Stroke Length: 30 – 110 mm Ram Adjustment: 95 mm Distance Between Table and Ram: 480 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,465 rpm) Max. Permissible Upper Tool Weight: 187 kg Over-run Time: 152 ms Safety Distance: 243 mm Machine Weight: approx. 9,960 kg
Lot 122: (2020) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P81 Serial Number: 04H160011A200180 Year of Manufacture: 2020 Nominal Force: 160t Stroke Rate: 60 – 85 strokes/min Stroke Length: 20 – 110 mm Ram Adjustment: 95 mm Distance Between Table and Ram: 480 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,462 rpm) Max. Permissible Upper Tool Weight: 390 kg Overrun Time: 130 ms Safety Distance: 211 mm Machine Weight: approx. 10,900 kg
Lot 123: (2015) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2015 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a fixed stroke rate of 62 per minute. Technical Details Manufacturer: Dirinler Model: CDCS 1600 P81 Serial Number: 04H160012A 140098R Year of Manufacture: 2015 Nominal Force: 160t Stroke Rate (Fixed): 62 strokes/min Stroke Length: 5 – 110 mm Ram Adjustment: 93 mm Distance Between Table and Ram: 474 mm Table Dimensions: 1,100 mm x 700 mm Max. Permissible Upper Tool Weight: 390 kg Overrun Time: 145 ms Safety Distance: 324 mm Weight: approx. 9,960 kg
Lot 124: (2015) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2015 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a fixed stroke rate of 62 per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160012A 140099R Year of Manufacture: 2015 Nominal Force: 160t Stroke Rate (Fixed): 62 strokes/min Stroke Length: 5 – 110 mm Ram Adjustment: 98 mm Distance Between Table and Ram: 476 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,460 rpm) Max. Permissible Upper Tool Weight: 390 kg Overrun Time: 134 ms Safety Distance: 302 mm Weight: approx. 9,960 kg
Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...
Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Manufacturer: Bahco, hydraulic pulling cylinder type CDXR 50-125 -Traction force: approx. 50 t -Stroke: 125mm -Piston rod: Ø 50 mm -Operating pressure: max. 800 bar -Recordings: inside 150 x 50 mm, see photos -Number: 1x cylinder available -Dimensions: 925/125/H165 mm -Weight: 32 kg
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD250B40/28-100 -Stroke: 100 mm -Piston rod: Ø 28 mm / M16 x 1.5 -Hole: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 88 x 400 mm -Weight: 5.9 kg/pc.
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Rexroth, double-acting hydraulic cylinder, stroke 600 mm -Type: CD70G50/36-600 Z10/01HFDM2-2T -Art.No.: 891467 -Piston rod: Ø 36 mm -Holes: Ø 20/12 mm / Distance: retracted 850 mm -Dimensions: 895/65/H110 mm -Weight: 11.6 kg
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N25-80C-B -Stroke travel: 80 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 220/30/H52 mm -Weight: 0.3 kg
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N25-50C-B -Stroke travel: 50 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 190/30/H52 mm -Weight: 0.3 kg/pc.
Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N20-50C-B -Stroke travel: 50 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 180/24/H48 mm -Weight: 0.2 kg/pc.
Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg
LARA SHEAR CDCH-1400 (year 2018) With a tow table. Hydraulic shear designed for the cross-cutting of strip and management of sheet metal surplus in coil feeding lines. It is supplied together with a feed table, allowing a comfortable and safe evacuation of the cut material and maintaining a clean and continuous production process. Robust equipment, of heavy industrial construction, especially suitable as auxiliary equipment in cutting, stamping or coil feeding lines. Work materials -Carbon steel -Stainless steel -Aluminum and light alloys Main technical data - Maximum working width: up to 1,400 mm -Drive type: hydraulic -Working pressure: 4–6 bar (pneumatic control system) -Power supply: 400 V / 50 Hz
lifting capacity: 3,5 to. : ja : ja : 80 % stroke: 3,5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders
PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw
maximum number of results exceeded
please refine your search
