cd 102 5 used for sale

Hydraulic power unit with tank LINCON KV 18-102-141/0.12 ( KV18-102-141/0.12 ) 8 bar 1 l/min motor: 0.12 kW 220 / 380 V used, tested ! Dimensions: 380 x 300 x 400 mm

Magnetic coupling FONAR OSTRZESZOW ETM-102-2H Ø 40 / 36 mm 24 V used, tested ! Dimensions: Ø 135 x 52 mm

Magnetic coupling FONAR OSTRZESZOW ? TM-102-1A (ETM-102-1A) Ø 40 mm 1 groove 24 V New ! Dimensions: Ø 135 x 52 mm

Maintenance unit with pneumatic switch WMW, EAW Type: 3 1026/19 switch st H2 NW 6 0 - 1 MPa New ! Dimensions: 380 x 240 x 150 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/12 0 - 400 kPa New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/18 0 - 1 MPa New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/17 0 - 140 (400) kPa New ! Dimensions: 320 x 150 x 135 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/13 0 - 1 MPa New ! Dimensions: 345 x 125 x 80 mm

Control magnet, electromagnet WET MAGNET 2610 00 102 ( 261000102 ) 12 kp 180 V Gs Dimensions: 280 x 100 x 110 mm

Auction-ID: A1-46315-81

everything works except the shaft doesn't turn Auction-ID: A3-43524-10002

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

Auction-ID: A1-46529-3006

Equipped with: PTO, roller, three-point attachment Auction-ID: A1-40138-250

Machine number: 219278 Operating voltage: 380 V Spindle passage: approx. 22 mm Spindle speed: 270-3000 rpm Centre length: approx. 350 mm Centre height above bed: 110 mm Turning diameter over bed: 220 mm Centre height over support: 70 mm Turning diameter over support: approx. 140 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuck including post collets and other suitable accessories Reference: Ulmer - Lot 16

Machine number: 204-10-2 Bending length: approx. 1020 mm Sheet thickness: 2 mm

Segment bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 275mm. Sheet width 1020 mm Sheet thickness 2.5 mm Stand width 1050 mm Opening width mm Bending angle max. 135 ° Machine weight approx. 0.32 t Space requirements approx. 1.4 x 0.6 x 1.3 m

Straight 6 Colour with Coater & Extended Delivery (UV & IR Drying),, Max Sheet Size 720 x 1020mm,, CP2000 Off Press Controls,, Autoplate & Preset,, Alcolor Vario Dampening,, Technotrans Refrigeration,, 4 IST UV Interdeck Positions between Units 1&2, 2&3, 4&5 and 6&L,, 3 x Interdeck IST UV Lamps,, 3 x End of Press IST UV Lamps,, End of Press IST IR Drying,, Tresu Chambered Doctor Blade with Anilox Roller,, Automatic Ink Roller, Blanket & Impression Cylinder Wash,, Technotrans Inkline Auto. Inking,, Non Stop Feeder & Delivery with Steel Plates,, Grafix Powder Spray Device, year of production 1999, counter only 135 mln

Electric motor, three-phase motor, fan motor, external rotor motor for fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, electric motor fan motor external rotor motor -Type: MK 115-GDK.12.N -Power: 0.35 KW / 380 V -Speed: 1400/1020/710 rpm -Protection class: IP 54 -Dimensions: Ø 190 x 170 mm -Weight: 11.1 kg

SARTORIUS CUBIS Precision Balance MSE10202S 10200g / 0.01g New equipment in its original packaging Laboratory Scale Reference: MSE10202S-000-D0 Weighing capacity: 10200g (10.2kg) Readability: 0.01 g Linearity: 0.02 g Weighing pan dimensions: 20.6 x 20.6 cm Weighing Units: g, kg, mg, ct, lb, oz, gr oz, tael, gr, dwts, Parts per lb, moms, Austrian ct, Tola, Baht, Mesghal Calibration Type: Internal

Technical Specifications Pole height: 102 mm Center spacing: 450 mm Maximum turning diameter on bench: 200 mm Maximum turning diameter on carriage: 120 mm Bar passing: 25 mm Spindle: 50 - 5000 rpm; 3 kW Tailstock: CM 2 Tailstock sleeve diameter: 30 mm Tailstock sleeve stroke: 80 mm Tool Holder: MULTIFIX Approximate dimensions: 1500 x 510 x 1550 mm Item sold in unverified status Auction-ID: A1-44614-11

Article: Guillotine shears / sheet metal shears (manual) Manufacturer: Metallkraft Type / Model: BSS 1020 Equipment / Execution:     •    Solid industrial guillotine shears     •    Hand lever drive     •    Back gauge with scale     •    Hold-down device     •    Stable base (standing machine)     •    Table with scale Condition: Used.     •    Working width / cutting length: 1,020 mm     •    Max. sheet thickness: 1.5 mm (steel)     •    Year of construction: 2008     •     ...

\" Office cabinet two-door, light grey, steel shelves – approx. 102 × 45 × 208 cm The cabinets are two-door and lockable. The body is made of melamine-coated furniture boards (MDF/chipboard) in light grey. The internal shelves are made of sheet steel, which provides a higher load-bearing capacity and lasting dimensional stability. Equipment: • 2 doors per cabinet • Lockable (key not provided) • Several steel shelves • Robust metal hinges • Suitable for folders, measuring equipment, documents or stored goods A picture shows both cabinets next to each other. Sale is made without content. 2 pieces Type: Office / filing cabinet Design: two-door Body: melamine-coated furniture panels Shelves: sheet steel Colour: light grey \" Auction-ID: A7-46417-342

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41455-19

flat roof steel construction; free span; trusses c.o.h. 4000mm; consisting of 5 sets of lattice girders with tubes as uprights; equipped with wind bracing and cross braces; steel construction is neatly ready for transport and must be picked up with 1 trailer; lots are loaded with a forklift for free Auction-ID: A1-41455-20

Span of tie rod between the rafters; trusses c.o.h. 4000mm; box section as uprights and lattice trusses; roof pitch 25 degrees; 3 sets of intermediate trusses; equipped with tie rods with suspension strips; bracing and cross braces; lot is neatly ready for transport and must be picked up with 1 trailer; Lot is loaded with a forklift for free Auction-ID: A1-41455-23

Laptop LENOVO E14 20RA001MGE Intel i5-10210U 16 GB RAM 480 GB NVMe SSD, S/N PF2BRTWC, without software

102 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 75.5 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40111-365

Maximum digging depth 1650mm; excavator bucket capacity 0.025 m³; Height of bulldozer plate 345mm; 360 degree rotation; lamp on the arm; 5789 Auction-ID: A1-46415-197

Special set 102 pieces, 28mm system incl. tool trolley Material: Burnished quality steel Scope of delivery see pictures Number of 102 Lots Weight 320 kg Condition new Hole diameter 28 mm Dimensions L x W x H 1.0 x 0.6 x 0.85 m Auction-ID: A7-46642-197

Segment bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 275mm. Sheet width 1020 mm Sheet thickness 2.5 mm Stand width 1050 mm Opening width mm Bending angle max. 135 ° Machine weight approx. 0.32 t Space requirements approx. 1.4 x 0.6 x 1.3 m Auction-ID: A7-46642-6

Machine number: 219278 Operating voltage: 380 V Spindle passage: approx. 22 mm Spindle speed: 270-3000 rpm Centre length: approx. 350 mm Centre height above bed: 110 mm Turning diameter over bed: 220 mm Centre height over support: 70 mm Turning diameter over support: approx. 140 mm The machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuck including post collets and other suitable accessories Reference: Ulmer - Lot 16 Auction-ID: A7-46763-354

Machine number: 204-10-2 Bending length: approx. 1020 mm Sheet thickness: 2 mm Auction-ID: A7-46287-147

Manufacturer: HARTFORD Year: 1999 Type: CNC Vertical Machining Center Numerical Control: FANUC O-M Axes: 3 Axes (X, Y, Z) Strokes: X 1000 mm / Y 500 mm / Z 550 mm Spindle: BT40 – 8000 rpm Equipment: Chip Conveyor, Full Documentation (Operator's Manual, Electrical Diagrams, FANUC Documentation) Condition: Machine in working order, loaded on truck (LOADED) Condition: used Auction-ID: A1-46647-229

X / Y / Z axis strokes: 1020 × 510 × 550 mm Spindle power: 11 kW Max. spindle speed: 6,000 rpm Spindle taper: BT 40 Tool magazine: 22 positions Weight (kg): approx. 6000 Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-251

Manufacturer: OMEGA Year: 1990 Type: High-capacity CNC vertical machining center Numerical control: FANUC 15M Axes: 3-axis (X, Y, Z) Strokes: X 1650 mm / Y 850 mm / Z 790 mm Table: 1900 x 850 mm Spindle: BT50 – up to 6000 rpm – gearbox 2 ranges Tool magazine: 30 positions Weight: approx. 15000 kg Notes: Heavy duty CNC vertical machining center, suitable for intensive machining and large parts. Auction-ID: A1-46647-227

The pictures are to be understood as an example, since the design of the containers has changed over the years, not all containers look the same. This applies in particular to the recess for the sign at the front. (Still the same size). Auction-ID: A7-46755-8

\"The Schaublin 102 VM mechanical lathe is a high-precision machine tool designed for machining operations, especially the turning of metal parts. Manufactured by the Swiss brand Schaublin, known for the quality and reliability of its equipment, this model is particularly popular in precision mechanics workshops, laboratories and demanding production environments. Offered as is, it is an excellent opportunity for professionals wishing to acquire a robust machine to be put back into service or optimized. With dimensions of 200 cm in length, 77 cm in width and 155 cm in height, this lathe offers a comfortable workspace while remaining suitable for a standard workshop. Its weight of 400 kg guarantees high stability, which is essential to ensure optimal machining quality and limit vibrations. The Schaublin 102 VM is therefore a reliable and high-performance solution for turning jobs that req ...

Serial number: 07400003691 operating hours read: 88,040 Spindle hours read: 43,558 Spindle speed range: 3200/5000 rpm Rotation diameter: 270 mm Turning diameter: 120 mm Spindle distance: 900 mm Travel X1: 290 mm Travel Z1: 650 mm Travel X2: 180 mm Travel Z2: 650 mm Travel Y1: +- 40 mm Travel Z3: 670 mm Travel X3: 175 mm Max. rod diameter: 100/104 mm Spindle bore diameter: 118 mm Rapid traverse speed X- and Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of driven tools per tool carrier: 12 Control: SIEMENS SINUMERIK 840 D POWERLINE incl. chip conveyor with 2 tool turrets - each with 12 tool positions main and counter spindles, as well as foot switches Attention, the machine has the following defects: -the B-axis is defective (sits on turret 1) -the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crooked in the range of 0.03 mm (would have  ...

3 sets of 3 & 3 sets of 4 sliding windows – 90, 94, & 102 cm x 240 cm, clear glass • Dimensions per window: width 90, 94 & 102 cm, height (day size) 240 cm • Maximum width complete set: 266, 278, 354, 370 & 400 cm • Total: 21 windows (3 sets of 3 pieces & 3 sets of 4 pieces) • Material & colour: anthracite aluminium frame, clear glass • Includes: 3 top and 3 bottom rails with 3 tracks & 3 top and 3 bottom rails with 4 tracks • 7 handles • Condition: Lot – may contain light streaks or smudges • Packaging: on pallet with glass • Note: photo of canopy is for illustration purposes • Forklift is available for collection Auction-ID: A1-40112-76

Maximum digging depth 1650mm; excavator bucket capacity 0.025 m³; Height of bulldozer plate 345mm; 360 degree rotation; lamp on the arm; 5789 Auction-ID: A1-46416-197

Peripheral matters around do not belong to the lot Auction-ID: A1-46547-131

Viewing by appointment only Auction-ID: A1-40256-63

9 sets of 3 sliding windows – 102 cm x 235 cm, clear glass • Dimensions per window: width 102 cm, height (day size) 235 cm • Maximum width of complete set: 300 cm • Total: 27 windows (9 sets of 3 pieces) • Material & color: black aluminum frame, clear glass • Includes: 9 top and 9 bottom rails with 3 tracks • 9 handles • Condition: Lot – may contain light streaks or smudges • Packaging: on pallet with glass • Note: photo of canopy is for illustration purposes • Forklift is available for collection Auction-ID: A1-40112-75

"The Schaublin 102 VM mechanical lathe is a high-precision machine tool designed for machining operations, especially the turning of metal parts. Manufactured by the Swiss brand Schaublin, known for the quality and reliability of its equipment, this model is particularly popular in precision mechanics workshops, laboratories and demanding production environments. Offered as is, it is an excellent opportunity for professionals wishing to acquire a robust machine to be put back into service or optimized. With dimensions of 200 cm in length, 77 cm in width and 155 cm in height, this lathe offers a comfortable workspace while remaining suitable for a standard workshop. Its weight of 400 kg guarantees high stability, which is essential to ensure optimal machining quality and limit vibrations. The Schaublin 102 VM is therefore a reliable and high-performance solution for turning jobs that requ ...

• Fendt Favorit 512C all-wheel drive tractor ・Built in 1998 • approx. 14,675 operating hours • 4 double-acting control units • Load-sensing hydraulics • Front loader consoles available • Cab with air-suspended seat • Technically in very good condition • Many parts renewed in the last 500 hours: • Engine wiring harness new • Turbo clutch new • New pre-feed pump • Injection pump + nozzles overhauled • Cylinder heads overhauled • Piston, bearings, tappets renewed • Water pump + hoses new • Oil cooler new • New straps • All oils and filters changed • Visually with signs of wear, but solid condition • Ready for immediate use Auction-ID: A7-46022-5003

Lightbox, single-sided HINRICHS FOTOFACTORY 500 x 500 mm ( 500x500mm ) max. foil size: 480 x 480 mm 230 V AC 50 Hz 32 W used, aluminium housing, tested ! Dimensions: 500 x 85 x 500 mm