cd 102 5 used for sale

Knapp roller conveyor accumulation 12720-510-450 RA2379 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 12720 mm in 7 Elements. Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller conveyors Drive: 30mm Belt Height frame: 90 mm Conveyor speed: 0,5m/s Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Roll width in mm: 450 Nominal / outside width in mm: 510 Conveyor speed m / s: 0,5 Roll division in mm: 60 Jam detection: Lichtschranke Construction year: 2022 Engine type: SEW Getriebemotor Conveying length in mm: 12720 Stowage spaces: 23 For individual, expert ...

Knapp roller conveyor 540-510-450 RA2384 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 540 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 540 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.

Heidenhain TNC 155 235 568 99

Knapp roller conveyor 570-510-450 RA2383 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 570 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides  ...

Knapp roller conveyor 600-510-450 RA2385 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...

Knapp roller conveyor 510-510-450 RA2386 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 510 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V angle: 0° condition: Ausstellungsstück Construction year: 2022 Conveying length in mm: 510 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For individu ...

This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Mazak HCN-5000 was manufactured in 2024. It features an X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 800 mm. The machine has a maximum workpiece weight of 700 kg and a spindle speed of 18,000 RPM. If you are looking to get high-quality machining capabilities, consider the Mazak HCN-5000 horizontal machining centre we have for sale. Contact us for further details.

Knapp angled roller conveyor 600-510-450 RA2387 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 24V condition: Ausstellungsstück Construction year: 2022 angle: 7,7° Conveying length in mm: 600 Nominal / outside width in mm: 510 Roll width in mm: 540 Roll division in mm: 60 Driven: YES Engine type: Interroll EC 300 Conveyor speed m / s: frei einstellbar bis 1,25m/s scope of delivery: without supports and side guides For ...

The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and gear technologies for the process of single-flank rolling testing for worm gear sets EFWP. Technical data Max. worm wheel diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm wheel weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Single-flank deviations Fi', fi', fl', fk' • Crossing, concentricity, roundness (option) • Carrying pattern with digital camera • Pitch deviation • FFT analysis, spectrum Picture shows the machine in its current ACTUAL condit ...

Qty. 1 Second-hand sandwich panel production line Line manufacturing of insulated metal panels for sectional doors (garage). Mfc.: METECNO Technology SPA; FASPAR Built: 1994 Reconditioned and commissioning: 2006 Useful working width: 500/610 - 10 mm Panel door thickness: 40 mm Sheet thickness: 0.37/0.70 mm Capacity: 1,500,000 m panels/year

Radius profile scraper IMA Type: 08.515

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity min.: 1 m/min   feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR   sheet width max.: 530 mm    ...

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible.

Siemens 570 214 9101.00

Pressure: 15 bar Motor: 11 kW Free air delivery: 1,319 m³/min Measurement (WxHxD): 2125 x 1730 x 820 Weight: 550 kg Compressed air connection: 1 1/4

feed pressure: . bar liter capacity: 60 l/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Immersion pump The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply. About usmore than 400 of our own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website. Visits are possible by arrangement.We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 2200-600-500 RA2388 Technical data: Make: Transnorm Conveyor length (NL): 2200 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,3-1,2 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,3-1,2 scope of delivery ...

Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,815 m³/min Measurement (WxHxD): 1890 x 1520 x 854 Weight: 437 kg Compressed air connection: 1/2

This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details.

Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

Transnorm conveyor belt GF 2250-600-500 RA2389 Technical data: Make: Transnorm Conveyor length (NL): 2250 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,15-0,80 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,15-0,80 scope of deli ...

Size: 520 mm Equipments: Exchangeable casettes format change system Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Inch printing unit inserts

Offer 25078 Specifications: - Cutting range at 90° around 550 mm - flat 570 x 550 mm - Cutting speed infinitely variable 20 to 100 m/min - Hydr. Raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 to 10 m/min - Material replenishment machine - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW -Attack - 2 x roller conveyor 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775

; Power [PS]: 612; Gross weight [kg]: 4950; Engine: Cummins QSZ13-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant Heater and Battery Charger; Water Tank Volume [l]: 775

Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Manufacturer: Esa Steuerungsdiplay, Type: VT 520G, FREE TEXT: war verbaut in Spritzmaschine Cefla,

Manufacturer: Siemens Card , Type: GE.548229.0001.00, Model: 548 229 9001, Serial Number: 3823,

; Gross weight [kg]: 4355; Engine: Baudouin 6M21G550/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 740

Komori Lithrone 520 + L Age: 2001 Counter: 67.6 mio. Impression Max. Sheet Size: 37.5 x 52 cm Min. Sheet Size: 10 x 14.8 cm Max. printing area: 36 x 51 cm Material thickness: 0.04 – 0.6 mm (0.72 mm) Performance: 13.000 sheets/hour Equipment: 5x Color Offset Printing Machine 1x Coating Unit Integrated Control Panel with Touch screen control PQC – Printing Quality Control X-Rite Auto Tracking Densitometer Double sized impression cylinder Automatic Blanket washing device Automatic Ink roller cleaning Halfautomatic Platechanging Extended Delivery IR-Dryer Baldwin Powder Komorimatic continuous dampening system Technotrans circulation and refrigeration device Ink temperature control 2x SBA transformer

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a table size of 1200 x 540 mm and impressive travels of 1020 mm in the X-axis, 540 mm in the Y-axis, and 510 mm in the Z-axis. The machine is equipped with a 30-position automatic tool changer and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 500 vertical machining centre we have for sale. Contact us for further details.

Manufacturer: Felder, Type: MG 580-1, Year: 2012, Control: yes, Min-max edge material mm: 0,4-5, Work piece width min-max mm: min. 70, Min.-max. workpiece length in mm: min. 140, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 11, Premilling: yes, Mitre stations: yes, Weight approx. kg: 990, Year :2012

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997