cd 102 5 used for sale

faceplate diameter: 500 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 230 mm table diameter: 500 mm workpiece height: 150 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm Drum brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mm turning length: / mm workpiece length: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

height of stroke: 3300 mm fork length: 2000 mm weight max.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10000 kg length: 5000 mm width: 2000 mm loading area height: 700 mm Heavy-Duty Trailers - Industrial Trailers - Available immediately from stock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 400 Kw, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 550 , Generator Volts: 230/400 , Generator Amps: 794 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/volvo-v550k-generator-550kva-u sed/193, , = More information =, , Empty weight: 3.625 kg, Type number: V550K GENERATOR 550KVA

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 15726.53 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 447 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 520 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 650 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/used-volvo-tad1630g-generator- 520kva/364, , = More information =, , Type number: TAD1630G GENERATOR 520KVA

Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block -Load capacity: 500 kg -Dimensions: see photos -Dimensions: 270/110/40 mm -Weight: 2.1 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 70 Hour(s), Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 506 , Generator Volts: 415 , Generator Amps: 705 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218740, , = More information =, , Type number: 12QTK GENERATOR 506 KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 480 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 558 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 760/696 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/detroit-diesel-12v92-ta-genera tor-500kva/112, , = More information =, , Empty weight: 5.075 kg, Type number: 12V92 TA GENERATOR 500KVA

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 54.6 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c3-3-8lj-51595 13-new/692, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 400 kg, Type number: C3.3 8LJ-5159513

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-03d53-50348 312-used/300, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 03D53 / 50348312; Transport weight [kg]: 565

Winding machine Lippelt Celba Multi Roll S-50N -Wrapping machine Lippelt -Type: S-50N - Condition see pictures

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Surface Grinding Machine JONES & SHIPMAN 540 LAR, capacity 450x150 mm, magnetic plate. Automatic cycle, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 0 - 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.000 Kg, Accessories: Magnetic plate, Auto cycle, Power rise and fall, DRO

Surface Grinding Machine JONES & SHIPMAN 540 X, capacity 450x150 mm, magnetic plate, dust extractor, OPTIDRESS E Factstor 2, Max working dimensions: 450x170 mm, Longitudinal travel x axis: 470 mm, Cross travel y axis: 171 mm, Clearance between worktable and spindle axis: 502 mm, Feed rate x axis: 2-25 m/1, Feed rate y axes: 0 - 1 m/1, Wheel speed: 2640 rpm, Wheel dimension: 200x20x31,75 mm, Spindle motor power: 1,5 Kw, Weight: 1.200 Kg, Accessories: Coolant tank, dust extractor, magnetic plate, OPTIDRESS E Factstor 2

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Lower piston press => table/stroke from bottom to top. Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - .ucymachines/

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/

Horizontal broaching machine RAWT 25 x 4000 x 500 company Hoffmann Year of manufacture 2003 Max. Operating pressure: 70bar, filling quantity hydraulic fluid: 630l, with loading gantry and sliding guide with carriage Find more here - .ucymachines/

The Combi-Pack CW 500 – S is a packaging machine used for combining and packaging products in various industries. Heres a general description and specifications for the Combi-Pack CW 500 – S: Machine Description: The Combi-Pack CW 500 – S is a versatile and efficient packaging machine designed for high-speed packaging applications. It incorporates advanced automation and control systems to streamline the packaging process and increase productivity. The machine is built with robust construction and precision engineering to ensure reliable and consistent performance. Specifications: 1. Packaging Speed: The CW 500 – S offers a high packaging speed, typically capable of packaging up to X products per minute (specific speed may vary based on product size and characteristics). 2. Product Compatibility: The machine is suitable for packaging various types of products, including but  ...

OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - .ucymachines/ Contact us at - sales@ucymachines