cd 102 5 used for sale

-Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece

Specifications: Digital 3-axis digital display HEIDENHEIN TNC 134 X-axis travel 500 mm Y-axis travel 350 mm Z-axis travel 380 mm Tool holder SK 40 vertical milling head with hydr. Tool Clamping DIN 2080 Ring Groove Table type Banquet table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories -Central lubrication - Coolant device -Operating instructions

Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Weight: 170 kg

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Food shelf, kitchen shelf, catering shelf, baking tray shelf -Dimensions: 600/5500/H1450 mm -Shelf spacing: 190 mm -Intermediate dimension: 485 mm -Material: Stainless steel -Weight: 42 kg

Drilling method ELB Full drilling 4-33mm Drilling depth max 737mm Spindle antrib 7,5 kw Spindle speed 550-6400rpm Working feed 35-320mm/min Rapid traverse 3500mm/min Coolant High Pressure Pump, Paper Filter, Chip Conveyor, Magnetic Separator Connection 20 KW Dimensions 4100 x 1650 x 1850mm Weight 3500 KG

Transnorm belt curve conveyor left GKF 90°-800-600-IR400 - Exhibit RA2318 Technical data: Frame width (NB): 800 mm Frame width with Bearing cover and motor: 1000 mm belt width (GuB): 600 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. 2 supports, current height 810mm Optionally available: Support, if deviating from the currently installed Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: Ausstellungsstück Nominal / inner radius in mm: 400 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES R ...

Prepared for CNC control Siemens 840 DSL Precision turntable make EIMELDINGEN with aerostatic axial bearings Specifications Table diameter 5,600 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 30,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 30,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Weber ASC 560 in absolute top condition

Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...

Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...

Food shelf, kitchen shelf, catering shelf, baking tray shelf -Dimensions: 790/540/H1430 mm -Shelf spacing: 220 mm -Intermediate dimension: 330 mm -Material: Stainless steel -Weight: 45 kg

Quantity divider, quantity distributor -Number: several available Price: per piece -Dimensions: 360/170/150 mm -Weight per piece: 38 kg

Key data: 1200 mm, 1600 , 1210

Machine type: EVP-RA 550 Manufacturer: ERBA Power kW: 4 Total volume: 550 lt. The EVP-RA 550 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories,  ...

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg -Lifting speeds: 1/3 m/min -Lifting height: 6 m -Double strand

Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile racking system -Width: 1300 mm -Depth: 500 mm -Height: 1520 mm -Quantity: 2 available Price: per piece -Weight: 40 kg/piece

Max. punching force: 500 kN Projection: 610 mm Includes an assortment of stamps and dies Weight: 1700 kg

S. No.: 1139 // Print counter (m): 66,6 // Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 50 mm -Piston rod: 36 mm -Stroke: 580 mm -Total length when retracted: 820 mm -Total length extended: 1400 mm -Piston rod thread -Ideal for building a hydraulic press - universally applicable -Dimensions: 1040/220/H200 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Folding machine MBO T 530-53/4/4 R; cleaned and tested; Working width 530mm; Roller diameter 40mm; round pile feeder; 1.Movement 4 pockets with 2 knife shafts; 2.Movement 4 pockets with 2 knife shafts; smallest fold 36mm; 2 machines available. Folding machine MBO T 530-53/4/4 R; cleaned and checked; working width 530mm; diameter of rollers 40mm; round pile feeder; first unit four pockets with two knife rollers; secound unit four rollers with two knife rollers; smalest fold 36mm; two machines on stock.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Printing machine Ryobi 512 H - Year of Make:2001 - 2 colors - Direct film dampening unit - Super damper - Shed Feeder - Landscape format: 36.5 x 52 cm - with plate punch - axe - Bacher plate system - With quick-plate tension rails - With Royse ECO-15 cooling unit - With voting table and lighting - Total revolutions: 23661330 - Printing number approx. 16 million printing - Very well-maintained machine - Fully functional

Stage lights, spotlights, lamps, searchlights -Ultralite Quadro-500 -Technical data: -Power supply: 15/230 V 50/60 Hz -Lamp: GY9.5 500 W -Weight: 3 kg -Average operating distance: 4-10 m -Swivel range: 45°-45° -Beam angle: Min/Max 8°-37°

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes from a CNC machining center MAHO type MCV 600 -Width: 500 mm -Length: 500 mm -with supporting ribs -with Span Index -Weight: 115 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Compressed air tank up to 11 bar, volume 500L

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power: 4 kW -U: 400 VAC -F: 25 kHz -I: 10 A Ac -P: 4 kW -Dimensions: 130/350/H210 mm -Weight: 7 kg

Oscilloscope -Dimensions: 165/450/H250 mm -Weight: 8 kg

Limit switches, push buttons, safety switches, position switches -230 V 4 A AC-15 -24 V 4 A DC-13 Price: per piece -Quantity: 10 available -Weight: 0.5 kg

Frequency-controlled drive motor Drive test bench Power 110 KW Voltage 400 V Speed 1500 to 5000 rpm adjustable motor with -Frequency - Incremental encoder, mains choke, mains filter - External fans Emergency Out Facility Hand control unit Frequency: Type: VCD 4 S 160A AZ/NS Serial Number: BKQ4S160AN20A-1 Output power: 207 KVA Motor power up to 160 KW Total weight approx. 1000 kg

Limit switches, push buttons, safety switches, position switches -AC-12 10 A 230 V -AC-15 6 A 230 V -DC-13 6 A 24 V Price: per piece Quantity: 5 available -Weight: 1 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 510 mm -Length: 350 mm -Height: 60 mm -Dimensions: 510/500/H190 mm -Weight: 120 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 550 mm -Depth: 660 mm -Height: 970 mm -Drawer internal dimensions: 440 x 590 mm -Drawer heights: 4 x 90/2 x 180 mm -Weight: 80 kg

SIM SF 500 Vibratory Spiral Conveyor SIM SF 500 Vibratory Spiral Conveyor with SIM BB-20 Belt Hopper and AKB DTB-UU-750/20 Linear Conveyor SIM SF 500 Vibratory Spiral Conveyors 230 V 50 Hz Diameter: 500 mm SIM BB-20 Belt Hopper 20 liters Filling volume: 20 litres Max. filling weight: 35 kg Chute width: 80 mm Belt speeds: 0.1 - 0.6 m/min Bunker tray, chute: stainless steel Drives: AC gear motor 230V/50Hz AKB DTB-UU-750/20 Linear Conveyors Delivery without enclosure More items - new and used - can be found in our shop! International shipping costs on request!

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

geared motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 24 mm -Brake: 24 V -Protection class: Tropical resistant -Weight: 15 kg

Lapping machine, STAHLI FLM 500, 3-ring lapping machine This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_o ...

Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

geared motor, electric motor -Speed: 150 rpm -Power: 0.1 kW -Design: B3 -Shaft diameter: Ø 10 mm -Protection class: IP 65 -Weight: 4 kg

geared motor, electric motor -Speed: 315 rpm -Power: 0.073 kW -Design: B3 -Shaft diameter: Ø 14 mm -Protection class: IP 54 -Weight: 7 kg

gear motor, electric motor -Speed: 750 rpm -Power: 0.8 kW -Design: B3 -Shaft diameter: Ø 25 mm -external fan -Protection class: IP 44 -Weight: 26 kg -Overall dimensions: 650 x 230 x H190 mm

geared motor, electric motor -Speed: 320 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 44 -External fan -Weight: 30 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2000 mm -Number: 4x stands -Price: complete -without: crossbeams -Weight: 50 kg

Labyrinth housing seal -d: 90 mm -D: 145 mm -B: 24 mm Quantity: 15 available Price: per piece -Weight: 2 kg

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 500 mm -without: Baking -Camlock mount: Ø 196 mm short taper 11 -Bolt circle: Ø 204 mm -Weight: 80 kg

Concrete bucket, concrete bomb, concrete silo -Concrete bomb: for concreting by crane -Contents: 500 liters -Crane slings -Dimensions: Ø 1100 x 1700 mm -Empty weight: 200 kg

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg