cd 102 5 used for sale

model is 5B 150P - table diameter is 800mm - max stroke is 160mm - control is Omron NS12 - logic equipment and sensors: Omron CS1 series CPU control cards Electric drawings and safety and instructions for use are updated at 2004 same as the modernisation

Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment -Measuring range: 0-500 mm -Dimensions: 670/185/H13 mm -Weight: 1.4 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Mauser, calipers, vernier calipers -Measuring range: 0-500 mm -Vernius: 0.05 mm -Dimensions: 655/157/H11 mm -Weight: 1.0 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

Surface Grinding Machine JONES and SHIPMAN 540 P Travel X: 483 mm Travel Y: 168 mm Maxi grinding height: Wheel chuck 190 mm / without chuck 240 mm Spindle rotation: 3200 RPM Year of construction: 1996 Magnetic chuck dimensions: 450 x 150 mm Grinding wheel: Ø 200 mm x thickness 25 mm Auto stepover X - Y Manual Z-axis rise Voltage: 380 V Equipped with: 1 Manual Magnetic Chuck BRAILLON PFF Equipped with: 1 Lubricant tank DARENTH type 1004/01 Tank dimensions: L 650 mm x Depth 700 mm x H 900 mm Dimensions (L x W x H): 1500 x 1100 x 1800 mm Weight: approx 1 T

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg

Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: adjustable in height -Dimensions: 515/300/H785 mm -Transport dimension: 840/540/H310 mm -Total weight: 56 kg

Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Three-phase motor, electric motor -Manufacturer: Kobold, electric motor type KOD 566 -Power: 0.18kw -Speed: 920 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Dimensions: 205/175/H130 mm -Weight: 5.5kg

Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg

PLC controller, Siemens Simatic Net CP Profibus, communication processor Manufacturer: Siemens, Simatic Net CP Profibus Ovp -Type: 6GK7 342-5DA02-OXEO CP 342-5 S7-300 Profibus 12MBAUD -Number: 2x Profibus available -Price: per piece -Cardboard dimensions: 150/130/H50 mm -Weight: 0.3 kg/pc.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 9,540 mm Number of fields per row of shelves: 05 pieces of 1,800 mm each Number of levels plus ground level: 09 pcs. Technical data on the volume: Pallet spaces per field: 20 pcs. Pallet spaces per row of racks: 100 pcs. Pallet spaces per field: 100 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 625 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: P93 Profile dimensions: 90 x 75 x 2.00 mm Adjustment grid: 50 | 50 mm Max. bay load: 11,250 kg At articulation height: 1,000 mm (Minimum 5 fields/row of shelve ...

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 6 EW 20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 4 EW 20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 5 EW 20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, compact CPU Simatic S7-300 -Type: 6ES7 313-5BF03-OABO -Number: 1x module available -Price per piece -Dimensions: 120/115/H125 mm -Weight: 0.8 kg/pc.

PLC control, digital input, digital input, electronic module, digital input module -Manufacturer: Siemens, Simatic ET 200SP digital input module -Type: 6ES7 131-5RDOO-OABO -Number: 1x module available -Price per piece -Dimensions: 80/30/H90 mm -Weight: 0.1 kg/pc

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 3,75 EW20° 5GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3000 x 1500mm 5000w With auto pallet changer & LiftMaster

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens, Simatic S7 analog output -Type: 6ES7 332-5HD01-OABO -Number: 1x module available -Dimensions: 115/40/H125 mm -Weight: 0.2 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg

Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210

Stuffing machine Eberhardt 5 x 7 Kaiserstüpfler, star rolls with 5 stud boxes Machine mobile Connection 400V, 16A-CEE plug Machine Many more bakery machines in stock!

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Fette, shell end mill with longitudinal groove -Type: Fette 50 x 25 H Sp 588 -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 50 x 25 x 22 mm -Weight: 0.2 kg

Atlas copco GA50vsd screw air compressor good as new.

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm

Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece

Producer: Nowicki Type: MA- 5.400 PSCH Power: 7,5 kW Weight: 3400 kg Length x width x height: 4100 x 1960 x 2280 mm Power supply: 400V/50 Hz Capacity: 5.400 L General overhaul - Without loading - NEW Cool type ZCH-3 TROPIC - Maximum load 3000 kg Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Müro paper milling machine A4; with frame; suitable for Müro 5000/A4. Müro paper mill; with frame; used for Müro 5000/A4.

Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: VMPA1-M1H-NP Mat. no. 533348 S302 -PN: 3 - 10 bar -Dimension: 110/40/H15 mm -Weight: 0.1 kg

Inv. Num. : 7718 Type: GL MATIC 500 Producer: OMAS Generated: Parameters: The machine is in good condition.

Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -Grooves: 175 x 30 mm -Holes: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg