136,423 used machines on RESALE, but how to find them? Machine Search
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens, Simatic S7 analog output -Type: 6ES7 332-5HD01-OABO -Number: 1x module available -Dimensions: 115/40/H125 mm -Weight: 0.2 kg
number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 560 mm -Photo: Short cone 11 -Bolt circle: Ø 235 mm -Through hole: Ø 140 mm -T-slot: Slot width 22 mm -Weight: 109 kg
Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg
NNP 5000L Holding tanks 2004, stainless, 5000l capacity holding tanks, insulated, level detection, three in stock
Ryobi 522GX year 2007 50 mil autoplte all wash units 0.6 mm max paper ryobi matic dampening in very good condition immadiately free
Immediately available refurbished shower holders, even used ones we have all in stock
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg
Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Manufacturer: Fette, shell end mill with longitudinal groove -Type: Fette 50 x 25 H Sp 588 -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 50 x 25 x 22 mm -Weight: 0.2 kg
Transnorm conveyor belt GF 4700-600-500 RA2120 Technical data: Conveyor length (NL): 4700 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4700 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...
Transnorm conveyor belt GF 2250-600-500 RA2056 Technical data: Conveyor length (NL): 2250 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of d ...
Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg
Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece
Weight: +/- 1,1 tons Power: 15 kW Length mm: 6800 Width mm: 1300 Height mm: 2300 Working height: 400 Transport size L x W x H: 2,5 x 2,4 x 2,3 mtr Maximum speed: 4 m/min Min.-max. glass thickness: 2 - 12mm Min.-max glass size: 2 x 3 Number of brushes: 4 brushes Condition machine : Disassembled in working order Control type: Manually Electric. Connection: 32A 3P+N+PE Photos/film available: Photos and video available Remaining: Left to right / RVS
Verdichter, Compressor, Copeland Scroll ZR 40 K3E-TFD-522 Displacement: 9.94m3/h 2900 Red/min. Power, Amp.7 Year: New Refrigerant 134a, and others
Transnorm conveyor belt GF 10800-600-500 RA2177 Technical data: Conveyor length (NL): 10800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 10800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...
Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg
Transnorm conveyor belt GF 19000-600-500 RA2170 Technical data: Conveyor length (NL): 19000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, SA37/T DRS71M4/MM07/LN Electrical data: 50Hz V380-500, kW 75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 19000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Euro ...
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: VMPA1-M1H-NP Mat. no. 533348 S302 -PN: 3 - 10 bar -Dimension: 110/40/H15 mm -Weight: 0.1 kg
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg
Transnorm conveyor belt GF 2350-600-500 RA2191 Technical data: Conveyor length (NL): 2350 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2350 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0.67 scope of d ...
Transnorm Rising falling Incline belt conveyor GF 4900+4100-600-500 RA2193 Technical data: Conveyor length (NL): 9000 mm ( 4900 mm + 4100 mm ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 9000 ( 4900 + 4100 ) Nomin ...
Transnorm conveyor belt GF 800-600-500 RA2192 Technical data: Conveyor length (NL): 800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 1,0 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 1,0 scope of delive ...
Transnorm Rising falling Incline belt conveyor GF 6000+3800-700-600 RA2199 Technical data: Conveyor length (NL): 9800 mm ( 6000 mm + 3800 mm ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9800 ( 6000 + 3800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YE ...
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg
Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg
Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock
Key data: 55 t
Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg
Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm counters of axes are damaged ? manufacturer don?t supply spare parts Control:SIEMENS 840 C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm Made in Germany
Size of magnet: 450 x 175mm Dimension of grinding wheel: ?250x25mm grinding flange included Made in Germany Control:SIEMENS 840C Grinding lenght: 600mm Grinding width: 250mm Grinding height: 400mm
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Key data: 500 mm, 400 mm, 300 mm
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
maximum number of results exceeded
please refine your search
