cd 102 5 used for sale

Battery from former Linde Service Very good performance measured at 25.1V Loading on pallet in truck with forklift. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1165

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3441

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qv_q8483Fcg - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 07/01/2020 48V 5PzS 625Ah, very good performance measured with 50.6V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat with lumbar support Auction-ID: A1-45453-217

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/CEvrZLMrTPc Former Linde full-service machine Powerful 48V device Front tyres AR PU Rear tyres LR Tandem PU Width over forks 540 mm Fork length 1,150 mm Battery Li-ION 48V 20Ah Charger Li-ION 48V 10A onboard Auction-ID: A1-45453-357

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 14/09/2018 80V 575AH , very good performance measured with 84.3V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45453-102

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3451

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3651

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_JKycaXsgcw - Former Linde full-service device - Triplex mast with full free lift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-45453-134

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45453-3702

The 18 volt LXT battery BL1850B from Makita is equipped with a handy sliding system and an LED indicator. The LED indicator shows the status of the battery and filling. When 4 LEDs are on, the battery still has a capacity = 75-100% When 3 LEDs are lit, the battery still has a capacity = 50-75% When 2 LEDs are lit, the battery still has a capacity = 25-50% When 1 LED is on, the battery still has a capacity = 0-25% If the last LED starts flashing, the battery needs to be recharged. If two of the four LEDs flash alternately, there may have been a malfunction in the battery. Amperage per hour: The higher the Ampere stated with a battery, the longer the battery can supply voltage (power), the charging time is also influenced by the Ampere-hour. In addition, the lot also contains a Makita battery charger DC18SD Auction-ID: A1-46851-1223

Battery with good performance, last service 09/2025 with 48h desulphation Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45453-1164

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3623

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45453-3580

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Equipped with: parking sensors v+a, pano roof, cruise control, rain+light sensors, 7 persons, aux, tow bar, privacy glass, Auction-ID: A1-42018-175

Equipped with: Air brakes, PTO speed 540/750/1000/1400, connection for front loader incl 6 valves (without the front loader itself), 4 double valves rear, 7 poles, tow bar, ac, work led lighting. Auction-ID: A1-40139-32

Cushion dimensions: 56 x 36 x 10 cm Approximately 450 cushions 90 pieces per pallet Block pallets size 120 x 100 cm included Auction-ID: A1-40139-296

Year of construction 2023 DC output 250–500 VDC Max. current 60A AC input 360–440 VAC Frequency 45–65 Hz Mains current 32A Protection class IP54 Weight 34 kg Connection Industrial power current Application Mobile charging EVs / workshops / demo / service Mobile trolley configuration CCS charging gun available Auction-ID: A1-42018-189

Equipped with: including forks, bucket, lighting, windshield wipers, lighting, rearview mirror, 24368 hour position, Auction-ID: A1-40139-188

54 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 39.9 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-152

Equipped with: Lemken Rubin 9/500 KUA, year of construction: 2013, air brakes, lighting + marking, double tube roller, wide wheels BKT 16.0/70-20, side discs, NL Registration, 40 discs, 620mm, power 129 - 184kW, suspension system ensures that the discs can lift over obstacles, but prevents lateral movement, Auction-ID: A1-40139-19

Equipped with: RAVO 5002, self-propelled compact street sweeper, brand RAVO, type 5002, year of construction 2000, equipped with hydraulically tiltable dirt container and closed cabin, suitable for use on industrial estates, logistics centers and municipal cleaning, time reading: 5,847 hours (read), 6-cylinder Iveco diesel, power: 81 kW, speed: 700 – 2500 rpm, empty weight: approx. 5,560 kg, max. Total weight: 10,500 kg, hopper capacity (waste container): 5.0 m³, Water tank: 600 litres, Standard working width: 2,200 – 2,400 mm, Working width with 3rd brush: up to 3,300 mm, Registration number: present, VIN: present on type plate, steel brushes (adjustable), 3rd brush (adjustable), suction arm, front brush unit, hydraulically tipping waste container (5.0 m³), water tank (600 L), built-in high-pressure cleaner with reel and spray lance, TFT colour monitor in cabin, closed cabin with  ...

Equipped with: 16 Newton blowing force, excluding battery Auction-ID: A1-40113-100

Party Explorer heated body warmers with hood (±500 pieces) Specifications: Model: Explorer bodywarmer Type: electric heated Material: polyester Sizes: XS to L Colours: black, ochre yellow, beige Quantity: approx. 500 pieces Heating: Carbon Fiber Heating Zones Heat settings: 3 adjustable Operating time: up to approx. 8 hours (depending on power bank) Washability: 40°C (delicate wash) Features: Integrated heating zones in back and shoulders 3-position heat controller Hood Lightweight and comfortable fit Durable and colourfast material Suitable for daily use Particularities: Large batch suitable for resale Relatively large proportion of size XS (approx. 100–120 pieces) Size XS suitable for youth from approx. 10 years Power bank not included Auction-ID: A1-40113-204

Equipped with: Lemken Albatros 9/5000-B27 trailed sprayer from 2011, tank capacity of 5,000 liters and a working width of 28 meters, professional agricultural sprayer equipped with Müller control system, Müller Trail Control and hydraulically braked chassis, machine is equipped with 9 sections with section switch and wide 520 tires, suitable for efficient spraying work on larger agricultural plots, hydraulically folding 28 meter spray boom, Müller control system, Müller Trail Control, 9 sections with section shift, hydraulically braked chassis, keg cleaner, wide 520 agricultural tyres, trailed version, year of manufacture: 2011, serial number: G02323, chassis number / VIN: 10151500198, tank capacity: 5,000 litres, working width: 28 metres, number of sections: 9, permissible gross weight: 10,250 kg, permissible support load: 1,830 kg, permissible axle load rear: 8,420 kg, length 8,50  ...

New and unused in the packaging. 336 pieces Composite Fence Board Anthracite / Black 182.5x15.4x2 cm. Model: Wood grain structure Auction-ID: A1-40113-162

New Victron Energy 3-Phase Storage System – 3× 5 kVA MultiPlus-II with 45 kWh LFP Battery (3x 15 kWh LFP Battery) Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 5 kVA MultiPlus-II inverter/chargers in combination with a 45 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 5 kVA) • 45 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and m ...

Equipped with 4-Cil. \"JCB\" Diesel engine STAGEV; 75hp; additional hydraulic function; 4 wheel drive; 4 wheel steered; 3 steering positions; tire size: 15.5/80-24; train driver code; LED lighting; 2LED beacons; weighing system; pallet fork; Auction-ID: A1-40139-10

Case maxxum 5120, Stands on fat tires, Powershift on the gearstick, 10500 operating hours, Front linkage, Air, 2 air horns on the roof, Drawbar with k80, Lift with catch hooks, 3x double-acting valve, Hydraulic brake valve, Auction-ID: A1-40139-33

Consisting of pallet of 50 pieces polycarbonate sheet clear 10mm, 1.05m x 3.58m. Auction-ID: A1-40113-500

Equipped with: PTO speed 540/750/1000/1400, 2 double valves rear, 2 double valves side right, estimated hours around 10000 hours Auction-ID: A1-40139-31

Equipped with: mechanical quick coupler, bucket 1400mm, bucket 420mm with teeth, height 2570 mm, width – 1990 mm, transport length (boom lowered) – 5500 mm, rear turning radius – 995 mm, max. Lateral travel arm (right, center box) – 960 mm, max. Lateral travel arm (left, center bucket) – 895 mm, max. Lifting height of blade above ground level – 415 mm, max. Digging depth sliding blade below ground level – 455 mm, undercarriage length – 2500 mm, max. Boom swing angle to the right – 61°, max. Boom swing angle to the left – 65°, Yanmar 4tnv88, water-cooled 4-cylinder diesel engine, engine power (iso) – 28.6 kW (38.2 hp), diesel tank capacity – 83 l, double variable and double gear pump, capacity – 2 x 57 + 41.4 + 11.7 l/min, working pressure (travel and working hydraulics) – 240 bar, hydraulic oil cooler, hydraulic tank capacity – 80 l, travel speeds – 2.7  ...

Industrial Planetary Mixer/Dough Mixer Version on floor tripod Equipped with mixing bowl / container Mixing bowl width: 42 cm Height of mixing bowl: 40 cm Supply voltage: 380 V 3-phase implementation Frequency: 50 Hz Power: 1 HP Speed: 1450 rpm Current: 1.8 A Made in England Heavy industrial version Auction-ID: A1-40113-168

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!

New 21.500 litre tank, Stock number: T21.5B6-9, Litre: 21.500, Material: Stainless acid proof steel AISI 316, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: 3 pcs., Inner diameter: Ø 2500 mm., Cylinder: H 4180 mm., Total height: H 5330 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

Mitutoyo, EURO-C 5400 CNC Measuring Machine Auction-ID: A7-47048-40

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-96

Accessories for Leadwell LTC-50CL CNC Lathe Shelf content, without shelf Auction-ID: A7-47048-6

Grinding wheels - 2 pieces Type Spec. 9A 541 JB U76 Max. RPM 2,360 Auction-ID: A1-47017-82

Description of the machine: This machine is suitable for turning chuck and shaft workpieces. The commercial steel grades, cast iron, copper, aluminum, brass, gunmetal and cuttable plastic can be rotated on this machine. --> Concept of the N.E.F. plus The machine comes standard with the equipment described below delivered - Cycle control - AC main drive - Combination carriage with AC drive and control panel - Tailstock movable with tailstock tensioner, manually clamped, with downstream centering tip - Coolant supply - Chip protection hoods, manually operated - Protective cover for chucks - Quick-change tool holder Hahn & Kolb Multifix C - Reducing ring for turning spindle Accessories according to pictures: - 2 pcs bezels - Various clamping jaws - Hahn & Kolb Multifix Type C - Various turning steel holders Technical data: Working Range: - Circumfere ...

Toshiba Nemio XG SSA-580A compact ultrasonic system in a mobile version. The device has an integrated control unit with keyboard, trackball control and several connection options for transducers. The system is equipped with a monitor, control panel and integrated printer. Two transducers are installed, additional connection ports are available. Documentation is available. Equipment: · Integrated monitor · Control unit with trackball and keyboard · 2 transducers (transducers) · Multiple transducer connectors · Integrated printer · Mobile system (trolley) · Documentation available Notes: · System currently not booting (boot error) · Hard drives are missing Proven ultrasonic system with extensive equipment and a solid basis for further use, training or spare parts acquisition. Can be used in human and veterinary medicine. Contact: Dennis Blos d.blos@tbauctions.com 0173 6040 381 ...

• Fendt Saphir 540 Caravan / Caravan • Type A313 • Built in 2009 • Well-maintained used condition • Ready to use • Chassis number: WFC1540JH91409351 • Empty weight approx. 1340 kg • Permissible total weight 1700 kg • TÜV until 12/2026 • Sleeps up to 4 people • Seating area in the rear can be converted into a bed • Two single beds in the front area • Kitchenette with stainless steel sink • Fridge with freezer compartment • 3-burner gas stove with cover • Truma gas heater with convection fan • Wet room with toilet and sink • Fly screens and blackout blinds • Large roof hoods • Plenty of storage space available • Water tank approx. 30 litres • Awning with poles approx. 2500 x 2500 mm • 100 km/h registration possible • External dimensions approx.: - Length 730 cm - Width 230 cm - Height 265 cm • Colour: White / G ...

incl.: Mitsubishi P93 Printer Auction-ID: A7-47030-198

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-92

Siemens 1 GG 5162-0KM46-6HU1-Z shunt motor, see nameplate used, normal signs of use, scope of delivery according to photos, Auction-ID: A1-47017-42

max. turning diameter 356 mm Turning length 510 mm Control M 720 BM MAPPS II Circumferential diameter over bed 923 mm Circumferential diameter over carriage 755 mm Standard turning diameter 275 mm Rod diameter max. 65 mm Main spindle: Spindle nose A2-6 Speed range - spindle max. 5,000 min/-1 Drive power - spindle motor 15 / 11 kW Spindle bearing diameter 120 mm Spindle bore 73 mm max. usable rod diameter 65 mm C-axis 0.001 ° Sub-spindle: Spindle nose A2-5 Speed range - spindle max. 6,000 min/-1 Drive power - spindle motor 11 / 7.5 kW Spindle bearing diameter 85 mm Spindle bore 43 mm max. usable rod diameter ( - ) mm C-axis 0.001 ° Travels: Travel of counter spindle B: 624 mm Travel - x 260 mm Travel - z 590 mm Travel - y 100 (+/-50) mm Tool turret: Turret head (x-fold) 12 powered stations 12 pos Shaft diameter 25 mm Shaft diameter for drill rod max. 50 mm Speed range of the ...

20 foot shipping container in perfect condition, practically new. Ideal for secure storage of materials, tools, pallets or archives. The walls, roof and floor are in excellent condition, with no perforations or significant corrosion. The doors open and close properly, the seals are in very good condition, guaranteeing a complete seal (no water infiltration, no light passage). Container suitable for use on construction sites, in warehouses, at a private home or a company. Auction-ID: A3-43538-35002

Exhaust / Muffler for Yamaha T-Max 560 as pictured Item price SO001353 Auction-ID: A1-46973-107

Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Incl. chip conveyor, tailstock, tool turret Auction-ID: A7-47048-5