cbi central botling used for sale

Roll jaws, floating central jaws, pull-down jaws -Dimensions: 160/31/H63 mm -Weight: 3 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111100 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

PLC control, central module, main memory, CPU, central processing unit, central device, Simotion, motion controller -Manufacturer: Siemens, Sinamics control Simotion D435 -Type: 6AU1435-OAAOO-OAA1 -Dimension: 270/50/H410 mm -Weight: 2.6kg

PLC control, central assembly, main memory, CPU, central processing unit, central device -Manufacturer: Siemens, Simatic S5 central module orig -Type: 6ES5 944-7UB21 -Dimensions cardboard: 310/215/H50 mm -Weight: 0.9 kg

PLC control, central assembly, main memory, CPU, central processing unit, central device -Manufacturer: Siemens, Simatic S5 central module orig -Type: 6ES5 943-7UB21 -Dimensions cardboard: 310/215/H50 mm -Weight: 0.9 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 117800 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 56100 € : 1122 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1425 mm : 1470 mm : 5450 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127000 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

PLC control, central assembly, main memory, CPU, central processing unit, central device -Manufacturer: Siemens, Simatic S5 CPU orig -Type: Simatic S5 6ES5 944-7UB11 -Dimensions cardboard: 310/215/H50 mm -Weight: 0.9 kg

PLC control, central assembly, main memory, CPU, central processing unit, central device -Manufacturer: Siemens, Simatic S7 orig -Type: Simatic S7 6ES7 414-1XF03-0AB0 -CPU: CPU 412-1 -Dimensions cardboard: 310/230/H35 mm -Weight: 1.0 kg

PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic -Type: Simatic S5 101U 6ES5 101-8UA13 -Dimensions: 260/115/H165 mm -Weight: 2.9 kg

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 62200 € : 1244 € : 3100 mm : 9 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1425 mm : 1470 mm : 6350 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

MARTIN T26 swivel spindle milling machine very well maintained, in good facilities: Swivel angle: from +/-45.5 degrees, electrically adjustable according to LED display Digital dimension correction when the height is adjusted, the correction factor for the swivel angle is displayed in the upper display Height adjustment: stroke 150mm, electrically adjustable according to LED display Speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, Quick-change system: Dornfix quick-change spindle with torque wrench electr. Pneum. Spindle blocking Comfort stop with mechanical indicators for overall adjustment and inlet jaw individually T2600 CENTREX protection T2601 control panel can be swivelled above T2621 table extension with extendable workpiece support T2635 Swivel device for milling stop T2628 guide strips in anodized design Type 1376 tenon cutting  ...

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750, Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - 2x spindle positioning attachment (pos. 6 + 7), - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - threading attachment, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750 (270 - 3.200), Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - cross drill device pos. 4, - 6 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 4, 5, - 2 radial slides in pos. 3, 6, - double slide in pos. 6, - pick-up spindle pos. 6, - pick-up spindle stop attachment pos. 6, - conveyor belt for finished parts, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, Number of spindles: 6, Max bar diameter [mm]: 32, Spindle speed [rpm]: 250 - 4.250 (250 - 3.350), Spindles interaxis [mm]: 276, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 9.500

Single stand - eccentric press KRUPP type PEKRD 125 h Masch. No. 2861 Year of construction 1977 Compressive force 125 ton. Projection 400 mm Table size 950 x 750 mm Ram surface 800 x 540 mm Table opening 100 x 250 mm Stroke adjustment 8 to 160 mm Ram adjustment 100 mm Installation height largest stroke top max. 550 mm Number of strokes 60 strokes/min. Table height above corridor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in the tappet - Compressed air Clutch-brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram position - Table top with ball rollers - Two-hand operation - Grease central lubrication HELIOS- Stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm Weight approx. 10 tons. good condition (very little used); used

3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Tensioning tool: 270 mm -Groove: 14 x 36 mm -Dimensions: 270/20/H50 mm -Weight: 2.0 kg

Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W -Dimensions: 610/480/H250 mm -Weight: 21 kg

Arc welder CLOOS Type GLC 206 Fabr. No. 1150 Year of construction approx. 1984 Nominal power 200 Amp. Power 250 Amp. - 60% ED 200 Amp. - 100% ED Adjustment range 18 steps Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- wire feed adjustment - external wire feeder CLOOS type CK 21 with 2 roller drive - equipped with 1.2 mm welding wire hose package 3 meters with central connection - current indicator - voltage display - air cooling with fan - pressure mannometer for gas cylinder Space requirement L x W x H 1200 x 460 x 960 mm Weight 160 kg; used

PLC control, central assembly, work memory, CPU -1x: GES7 223-1BH00-OXAO EM223 -1x: GES7 222-1BF00-OXAO EM222 -Price: complete -Dimensions: 195/80/H65 mm -Weight: 0.4 kg

Tig welding machine L-TEC Type inverter TIG 200 DC Fabr. No. 184548 Year of construction approx. 1994 Power 200 Amp. = 60 % ED 155 Amp. = 100 % ED Setting range infinitely variable Current type DC (DC ) Mains connection 400 Volt, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand burner- with remote potentiometer (foot switch) - Gas pressure reducer fitting - only direct current - HF ignition Space requirement L x W x H 850 x 480 x 740 mm Weight approx. 150 kg good condition; used

Model 2050 Power Hp 30 Serial number 20701 Made in Italy Central shaft 150 mm, 2 lateral shaft 120 mm

3 circular machines Orizio PL hp12 including side cantra and central vacuum cleaner + ribbon vessels to be partially overhauled.

Arc welder CLOOS Type GLC 357 N Fabr. No. 476 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED setting range infinitely variable connection hose package 3.5 meters mains connection 380 volts, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 3.5 meter hose package- 4 meter hose package with central connection and BINZEL hand torch - water-cooled- pressure mannometer for gas cylinder Space requirement L x W x H 1300 x 600 x 1100 mm Weight 260 kg good condition; used

Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used

ORDER NO. 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max disc diameter 400mm - disc bore diameter 80mm - max cutting height 140mm - table top width with clearance 730mm - tabletop length 2130mm in advance: -Triggers - pressure shaft, sliding roller -Triggers - pressure roller, smooth - shaft with saws - smooth pressure shaft 4 pcs From below: - Slip shaft, smooth -Triggers -caterpillar Feeding table + guide rail - roll width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm Take-up table - pulling rollers 8 pcs - roll width 800mm - total dimensions length/width/height 4400x980x880mm - Central lubrication - electric lifting of the body up/down 0.55kW - electric shaft adjustment with 0.55kW saws - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1k ...

ORDER NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm C9znbyq - max disc diameter 300mm - disc bore diameter 80mm - min element length 630mm - max element width 600mm in advance: - pneumatic clamp -Triggers - pressure shaft, metal 2 pcs -Triggers - shaft with saws - pressure roller, smooth -Triggers - pressure roller, smooth From below: - metal shaft, pulling, toothed 2 pcs -Triggers -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed control on the inverter - main engines 2x55kW - 4kW feed motor - hydraulic lifting of the body up/down - hydraulic adjustment of shafts with saws - pump motor 0.37kW - Central lubrication - diameter of the extraction spigot 1x300mm, 1x380mm - dimensions length/width/height 3200x2350x2000mm - weight about 5500kg ADVANTAGES � ...

Single Stand - Eccentric Press WEINGARTEN Type ERV 40 Masch. No. 537 / 65 Year of construction 1965 Compressive force 40 ton. Projection 230 mm Table size 570 x 470 mm Ram surface 250 x 200 mm Clamping pin bore 40 mm Installation height max. approx. 520 mm Stroke adjustment 8 - 88 mm Ram travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate - Clutch-brake combination by WEINGARTEN Friction threaded coupling - electric 2-hand operation and foot switch - Central lubrication via hand pump Space requirement L x W x H 1600 x 1150 x 2300 mm Weight approx. 2.6 ton.; used

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Single Stand - Eccentric Press PELS - RICHTER Type PEKR 125 Masch. No. 20684 Year of construction 1967 Compressive force 125 ton. Projection 430 mm Table size 1100 x 750 mm Ram surface 890 x 650 mm Table opening 400 mm Stroke adjustment 6 to 115 mm Ram adjustment 100 mm Installation height largest stroke above max. 450 mm Clamping pin bore 50 mm Stroke rate 60 strokes/min. Table height above corridor 900 mm Motor power 7.5 kW Mains connection 380 volts, 50 Hz - Overload protection by crushing plate in the plunger - Compressed air Clutch-brake combination DESCH- Plunge weight compensation cylinder - Manual ram position - Two-hand operation - Cam switchgear - Grease central lubrication Vögele - Stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm Weight approx. 10 ton. good condition; used

Univ., Milling machine table, Angle table, Clamping angle, Clamping table T-slot table, Attachment table for Univ. Tool Barrel Machine Table No.: 2230 05 001 300 00 Table size 700 x 460 mm Height 280 mm Slot width 14 mm Slot spacing 65 mm - Table top with 7x T-slot 14 mm mounting plate with 14 mm with slotted holes for mounting and 14 mm guide groove hole spacing Mounting plate Top = 670 mm, 50 mm top of the table surface (centrally measured) - Hole distance mounting plate center = 475 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate center = 2 pieces 15 mm, 100 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate bottom = 475 mm, 240 mm top of the table surface (centrally measured) Dimensions L x W x H 700 x 460 x 280 mm Weight 130 kg very good condition; used

Arc welder CLOOS Type GLC 403 PA-TS Fabr. No. 8198 Year of construction 1994 Nominal power 400 Amp. Power 400 Amp. - 60% ED 310 Amp. - 100% ED setting range infinitely variable connection hose package 4.5 meters Mains connection 380 Volt, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72/5TSZK with 2 roller drive and 4.5 meter hose package- 4 meter hose package with central connection and EHRIG hand torch type Senator-800-D - Water-cooled - Pressure mannometer for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 300 kg good condition; used

Reel on and off reel, reel GSW SCHWABE Type LHD 50/800 Probe Double unwinding reel, double uncoiler Fabr. No. 5775 Year of construction approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Plant discs 850 mm Start-up rings 850 Center reel shaft to reel foot 980 mm - Reel structure manually rotatable by 180 with latching steps - central spread via rotary lever adjustment - mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg good condition; used

Excellent price for quick sale only- machine still in operation ONLY IF THE MACHINE IS SOLD BEFORE WE TAKE IT TO OUR WAREHOUSE UTECO gearless flexopress in operation central drum 8 col quick sleeva change on anilox and printing sleeves automatic washing longitudinal register with drive/ motorised: yes trasversal register: yes viscometers Video camera Web guides automatic unwinder, diam up to 1000 mm automatic rewinder, diam up to 1000mmm computer suvervision of the machine list of anilox & sleeves on request Special price for quick sale ONLY IF THE MACHINE IS SOLD BEFORE WE TAKE IT TO OUR WAREHOUSE Machine offered subject to unsold wide offer of high quality used machines for attractive prices we also buy for stock / warehouses in EU over 20 years of experience in the industry

Arc welder CLOOS Type GLC 357 N Fabr. No. 576 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED adjustment range infinitely variable connection hose package 4.5 meters mains connection 380 volts, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch - water-cooled- pressure mannometer for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 260 kg; used

Oscillating shears KÖLLSCHEN type BSK 2000/2 Fabr. No. 69 1307 Year of construction 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Engine power 4 kW - Drive via gear motor with brake and crankshaft - Mechanical sheet metal hold-down - manual backgauge 500 mm - Stop adjustment via 2 handwheels, rear on the backgauge guide with dimension cala - front side stop left 720 mm- electric foot switch - manual central lubrication - control cabinet on the machine- machine stands on 4 pieces oscillating elements, approx. 100 mm height space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition; used

Key data: 2100 , 9

CNC milling machine 2132 OPTIMAT 2100x3200 ATC 100% European product New for 2022! CNC milling machine 2132 with a weight of approx. 4100 KG and a working table area of 2100x3200mm, equipped with an automatic 12th tool linear magazine cooperating with the HSD / HITECO 9kW 24000rpm electrospindle (ceramic bearing, HSK F63 interface) enabling the use of tools with a diameter up to 26mm inclusive! Technical parameters: Effective working size: 2100x3200mm - Trouble-free processing of the entire size of the furniture board - Vacuum workbench made of HPL Machine weight: approx. 4100KG - The frame of the machine made of the highest quality alloy is welded in its entirety, then subjected to the stress relieving process in a special chamber with special conditions, and then milled. This process ensures that excellent results of structural rigidity and stability are achieved Z-axis stro ...

Arc welder EWM Type MIG 230 Fabr. No.: L/0340 Year of construction 1994 Power 230 Amp. = 35 % ED 120 Amp. = 100 % ED Setting range 8 steps Mains connection 400 Volt, 50 Hz, 16 Amp. Plug 2-stroke and 4-stroke welding device- Spot welding device - 2-roller wire feed - 3 meter hose package with central connection - Welding gas pressure reducer Space requirement L x W x H 1000 x 450 x 700 mm Weight 70 kg good condition; used

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

Brewery Ziemann 400 HL / brew – max. 12 brews/day Brewhouse made by Ziemann in year 2000, 400 hl/brew, with a mash filter, made by Meura in year 2000. It is almost complete brewery, which can produce various type of beers at 700’000 hl / annum. Brewery has also one returnable glass bottle (24’000 bph) and one can filling line (30’000 cph) which will be sold separately. Brewery equipment is in good condition, not dismantled, still on power. The brewhouse is controlled by Braumat control system. Most of the PLC controls is made with Siemens Simatic S7 series with central control via Ethernet. Installed mash filter Meura improves the performance of brewing process (compare to filter tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change. The main technical characteristics of this brewery: Year of manufacturi ...

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

x-travel: 1000 mm y-travel: 360 mm z-travel: 400 mm spindle taper ISO: 40 ISO table:: 1370 x 300 mm feed:: 30-830 / 23-625 mm/min. turning speeds: 45 - 1660 U/min distance spindle /table: 60 - 460 mm rapid traverse: Z Achse 750 mm/min throat: 95 - 575 mm total power requirement: 3,0 kW weight of the machine ca.: 1505 kg range L-W-H: 1740 x 1860 x 1900 mm The universal milling machine UWF 110 Servo is suitable for the execution of light and medium-heavy milling work. Thanks to their great versatility and It can be used in workshops for machining small and simple conversions medium-sized series can be used successfully. Special features of this The machine is the swiveling work table, the flat guide in the y and z axes and the servo drive for feeds and rapids in all axes. scope of delivery : - 3-axis digital display ES-12 H with LCD display - Tightening spindle M16 - LED machine light - Fe ...

: gebraucht : 2021 : 9485 : Türkei : 2100 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution  ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...