cbi central botling used for sale

Revised and repainted. The images are sample photos of similar machines and are intended to show the execution and quality of the revision. All wear parts are replaced. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Panel size: 630 x 630 mm Dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 litres Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", central Number of plates: 40 plates Material sheets: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filter trough + drip tray in plastic, Engine hydraulics with single-acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator has to push the pressure plates back by hand. Optional: fill ...

: 1550 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 2,2 kW : 1210 kg : 2650 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: L 260 mm capacity 45 degrees: square: L 250 mm capacity 90 degrees: flat: L 270 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm capacity 45 degrees: round: R 200 mm capacity 45 degrees: square: R 180 mm capacity 45 degrees: flat: R 200 x 160 mm saw band length: 3650 x 27 x 0,9 mm cutting speed: 40 / 80 m/min total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,640 t dimensions of the machine ca.: 1,2 x 1,7 x 1,7 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and shutdown at the end of the cut) New ve ...

Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable

Mercedes Actros 2550 L 6x2, #261 424,572 km Müller, Canalmaster F 145 ECG, Vacuum cleaner ADR Construction -Miller - Canalmaster F 145 ECG - approx. 14,500l litre container size - approx. 1,150 litres of rinsing water - approx. 6,345l litre sludge volume - Emptying by extension piston oils made of stainless steel + tipper - Piston position (sludge/water): approx. 7,000l / 6,345l Vacuum system - Wittig RFW 260 - Approx. 1,540 cbm/h High-pressure system - URACA KD 724-G approx. 106l/min at 800bar - manual flushing hose reel suitable for 60m DN13 Fresh water pump - Speck P45/75-180 approx. approx. 72l/min at 180bar - hydraulic flushing hose reel suitable for approx. 160m DN12 Particularities - Tank material: stainless steel 1.4571 - Hose tray left and right -Camera - 2x steel toolbox - Connecting pipe sludge-water chamber for complete use - Wired remote control with foot switch for HD ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm : 40 / 80 m/min : 3650 x 27 x 0,9 mm : 300 mm : 260 mm : 330 x 260 mm : 260 mm : 250 mm : 270 x 200 mm : 180 mm : 170 mm : 170 x 170 mm : 870 mm : 2,35 kW : 0,7 t : 2,7 x 1,6 x 2,0 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control New version: now with anti-vibration rollers and an even more powerful gear size 75 and considerably reinforced cast steel saw frame Control modes: Manual mode Semi-automatic dynamic operation (The semi-automatic cut is made by manual approach of the saw bow from any position via actuation of the handset started) Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed Vice closes / opens automatically, the saw curve becomes the start of the cut automatically  ...

Machine Details Warehouse number 1105-03727 Machine Type Machining Center - Vertical Make YANG EAGLE Type MCV 1000 Year of construction 1998 Control type CNC Control Fanuc O-MD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1015 mm y-travel 500 mm z-travel 500 mm Control Fanuc O-MD Clamping surface table 1070x500 mm Table load - central/maximum approx. 250 kg Tool holder BT 40 Spindle speed: 24...6000 rpm Operating hours 5617 h Tool magazine with 20 seats/places Total power requirement 12 kW Information Equipment: CNC FANUC OMD -Cooling device BT 40 Copy of user manual available! Machine can be demonstrated! I.d..

NNP 500l mixing vessel Stainless mixing vessel, 500l capacity, top mounted motor with agitation and scrape surface, loaded on weigh cells, central bottom discharge with side chute, 3Ph

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

CNC Model: Selca CNC version: 1200 Head type: Vertical spindle head Additional technical notes for the head: 2-spindle rotary Bi head with orientation in the 4 CNC dials 1° rotation possible with panel control Tool connection: iso 50 Spindle power: 20Kw Number of spindle revolutions: 1500 X Shaft Stroke: 6300mm Y Axis Stroke: 1000mm Z Axis Stroke: 1900mm Table dimensions: 8000 x 1200mm Guides: flat Cutter type: moving upright Mechanical range change: yes Number of ranges : 2 Other technical data: Machine completely in cast iron Selca absolute optical lines Centralized lubrication DC axis motors

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (split) connection diameter 140 mm dimensions of the machine (L/W/H) 410 / 200 / 180 cm weight ~ 3000 kg

CNC tool milling machine MIKRON type WF 21 D CNC path control Heidenhain TNC 355 Masch. No. 5241010 Year of construction 1990 Travel X: 450 mm Y: 400 mm Z: 400 mm Table size 700 x 350 mm Spindle mount ISO 40 Spindle speed 40-4000 rpm. 21 stages Feed rate 2-3000 mm /min. Rapid traverse X and Y 6000 mm/min. Rapid traverse Z 5000 mm/min. Nail displacement 90 mm Distance table - spindle nose max. 450 mm Main spindle drive 3.3 and 4 kW - Splash guard table housing - Coolant device - Central lubrication - Control cabinet fixed to the back of the machine- electronic handwheel - 55103 Hours of switch-on space L x W x H 3000 x 2700 x 2000 mm Weight 2400 kg very good condition; used

–DTR – German production – electric adjustment of the left head – adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 4 kW 2) right head 3) left head 5.5 kW 4) top head 4 kW 5) universal head 360° 4 kW feed motor 2.2 kW feed speed 5 – 20 m/min four steel pulling rollers two top rollers pulling rubber one pulling roller in the countertop feed on cardan shafts electric height adjustment length of the pre-worktop 1970 mm central lubrication pneumatic clamps dimensions of the machine (L/W/H) 380 / 200 / 170 cm weight ~ 2000 kg

– German production – year of production 1999 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm spindle diameter 40 mm feed 10 m/min feed motor power 3 x 0.85 kW first bottom spindle 4 kW second right spindle third left spindle 7.5 kW fourth top spindle 5.5 kW .max. diameter of horizontal / vertical tools 140 mm / 180 mm two upper steel pulling rollers one top roller rubber pulling one rubber roller in the countertop central lubrication of the table top table top length 2465 mm pneumatic clamps upper head shoe connection diameter 250 mm dimensions of the machine (L/W/H) 360 / 140 / 175 cm weight ~ 1000 kg

– German production – year of manufacture 2002 –DTR TECHNICAL PARAMETERS: planing width 230 mm planing height 170 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW spindle diameter 40 mm electric height adjustment five steel top rollers four rubber top rollers pneumatic pressure table top length 1980 mm central lubrication feed adjustable on the inverter 6-26 m/min feed on cardan shafts feed motor power 4 kW connection diameter 140 mm machine dimensions (L/W/H) 520 / 210 / 210 cm weight 4000 kg

GEKA BENDICROP 60 SD ironworker machine was manufactured in 2016 in Spain. Equipped with 5 work stations, the ironworker machine performs precise hole punching, corner cutting, flat bar cutting, as well as bar cutting and bending. The vertical movement of the shears is performed by two adjustable hydraulic cylinders with a central positioned actuator, which guarantees excellent cutting quality throughout the entire life of the machine. The GEKA ironworker machine weights 1750 kg. Technical specifications of the GEKA BENDICROP 60 SD hydraulic ironworker machine General data - maximum press force: 60 t - number of cylinder strokes: 32/min - dimensions (L x W x H): 2010 x 1400 x 2006 mm - weight of machine BENDICROP 60 SD: 1750 kg Hole punching station - maximum bore size (diameter x thickness): ø 40 x 11 mm - throat depth: 500 mm - additional table for hole punching fi 100 ...

–DTR – German production – electric adjustment of the left head – adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) bottom head 5.5 kW 2) right head 3) left head 7.5 kW 4) top head 5.5 kW 5) universal head 360° 5.5 kW feed motor 2.2 kW feed speed 5 – 20 m/min four steel pulling rollers two top rollers pulling rubber one pulling roller in the countertop feed on cardan shafts electric height adjustment length of the pre-worktop 1970 mm central lubrication pneumatic clamps dimensions of the machine (L/W/H) 380 / 200 / 170 cm weight ~ 2000 kg

– German production – year of production 1997 TECHNICAL PARAMETERS: track width 250 mm cutting height 120 mm .max. disc diameter 350 mm spindle diameter 50 mm sleeve diameter 70 mm six upper pressure rollers four rows of latches Min. material length 600 mm .max. width materials 680 mm smooth feed adjustable up to 22 m/min electric height adjustment ruler central lubrication engine power 22 kW connection diameter 150 mm machine dimensions (L/W/H) 210 / 160 / 210 cm weight 1600 kg

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run bending program.  ...

– after technical inspection – very good condition – Italian production – year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm cutting height 160 mm engine power 37 kW feed speed smoothly adjustable spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-jet latches three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide line laser central lubrication connection diameter 200 mm machine dimensions (L/W/H) 220 / 190 / 180 cm weight 1800 kg

Key data: 200 mm, 300 mm, 200 mm

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

– German production – year of manufacture 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm motor power 2 x 37 kW feed speed smoothly adjustable on the inverter disc diameter max. 350mm bottom shaft 400mm top shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of latches four upper pressure rollers electric height adjustment possibility to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm connection diameter 200 mm transport dimensions (L/W/H) 320 / 200 / 240 cm weight ~ 5000 kg

–DTR – Italian production TECHNICAL PARAMETERS: track width 300 mm cutting height 120 mm .max. disc diameter 350 mm engine power 30 kW table width 750 mm Min. element length 600 mm feed adjustable on the inverter two rows of anti-jet latches possibility of putting on a board - shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts connection diameter 200 mm dimensions of the machine (L/W/H) 155 / 165 / 160 cm weight 1800 kg

automatic baler Manafacture: UNOTECH Type: UPAMAT 100 V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Duct format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Output: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large-digit display  ...

– year of manufacture 2007 – DTR documentation – Czech production – two lasers – ruler TECHNICAL PARAMETERS: track width 440 mm cutting height 55 mm – 200 mm disc diameter 320 mm main engines 2 x 75 kW feed motor 3 kW feed speed adjustable on the inverter up to 60 m/min five upper pressure rollers bottom auxiliary roller five rows of latches electric cutting height adjustment electric shaft height adjustment automatic central lubrication shaft diameter 60 mm wedge 18 mm sleeve diameter 80 mm wedge 13 mm sleeve length 440 mm connection diameter 200 mm transport dimensions (L/W/H) 280 / 245 / 230 cm weight 5120 kg

Planer WEINIG UNIMAT SUPER 4 – German production – very good condition – year of manufacture 2004 –DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools adjustable top head 1) bottom head 11 kW 6000 U/min 2) top head 18,5 kW 7000 U/min 3) bottom head 5,5 kW 6000 U/min feed motor 2,2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic pressure three upper fixed pulling rollers one rubber top roller corrugated top length of the pre-worktop 1950 mm total power 37 kW central lubrication Trzansport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER

For sale is a functioning pellet production line including controls. The plant is suitable for pelletizing agricultural raw materials (straw/hay/alfalfa etc.) and has an output of 1000-1600 kg/hour depending on the material. The complete system has approx. 800 operating hours The production line is composed of: cjffolp2bh Byfo0wxd Bale breaker 37 KW + bale conveyor table 10m and Hammer mill 75 KW Zyklon + Rotary Valve + Buffer Tank Scheuch dust filter house with control system and a capacity of 20,000m3/h including discharge for big bags, 2 Koller ring matrices pellet mill 110 KW with aut. Central lubrication. In the associated conditioner, the moisture content of the material is automatically controlled by means of a dosing pump and mist nozzle as well as a microwave sensor from the Envea brand. Pellet cooler with level sensors and automatic emptying. Vibrating scr ...

Used stainless steel ribbon mixer with a capacity of 3000 LTR by MŁYNPOL model MP-3000. Device for food applications. It has a main agitator and 2 high-speed shredders on the sides. Product loading from the top. Central bottom discharge. Main engine 22 kW. Mixing time 4-5 minutes. Emptying time: 30-60 seconds. Emptying accuracy 99.5%. Rotation of internal mixers (shredders): 920 RPM. Working temperature: -5C to +45C. The device is suitable for the following applications: - spices - sugar, starch - coffee - salt - powder concentrates for the production of ice cream and waffles - powdered sugar, sugar with additives - coffee Tea - cereals - dried fruits - casein - powdered milk - detergents - gypsum, talc - dolomite, cellulose - pharmaceuticals and chemicals - other Dimensions: 5100mm x 1340mm x 1950mm (L x W x H). The device worked on ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

CNC PLASMA BURNER ProMax Professional Series TECHNICAL PARAMETERS working width from 1500 to 4000 mm working length from 3000 to 12000 mm travel speed up to 80 m/min max cutting thickness of plasma sheet up to 50 mm gas up to 150 mm KEY EQUIPMENT VEICHI servo drives X-axis support with double rails quick START - preparing machines for cutting less than 1 minute nesting ProNest LT- a program for decomposing material into sheet metal planetary gears helical oblique slats in class 6 touch screen with industrial computer remote control sectional extraction table with pneumatic actuators CS anti-collision system - a system protecting the burner against collision Central lubrication CLS double Y-axis basing laser marker indicating the position of the burner SC system - security system

Machine with painted aluminum structure, equipped with Lexan protections complete with micro safety. Easy to clean and accessible. Technical data: Length mm 3750 Width mm 2700 Height mm 2080 Sliding surface height mm 700 – 1000 Weight Kg 1600 Voltage Volt 400 Frequency Hz 50 / 60 Current A 11 Mechanical speed carton / min 200 Production characteristics: Case length mm 75 – 350 Case width mm 140 – 450 Case height mm 120 – 350 Equipped with: one input product feeding belt; pneumatic product elevation group; stainless steel AISI 304S stacked product collection hopper with independent motorization; product introduction group with own motorization complete with encoder. The machine is also equipped with inclined carton magazine with a capacity of about 50 cartons; carton picking unit, with suction cup arm with independent motor complete with encoder; carton tr ...

Order No. 6762 TECHNICAL DATA - max width of the workpiece 220mm - max height of the workpiece 130mm - 4 spindles: 1) horizontal bottom 220mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 7.5kW - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - from the top 4 introducing, drawing, toothed rollers - from above, 1 pulling roller, rubber - at the bottom, a pulling shaft, rubber - feed on cardan shafts - smooth regulation of the feed speed - 1.5kW feed motor - lifting motor 0.25kW - electric adjustment of the planing thickness - length of the introductory top 1970mm - central lubrication - diameter of the extraction connector 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3350x1400x1430mm - weight about 1500 kg - German production - unpainted - us ...

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

SKINETTA OVERWRAPPING MACHINE, MODEL ASK 450T Year of construction: 2002 Automatic intermittent motion overwrapper machine, suitable to bundle the product using stretchable film. Guarantees high productivity, accuracy in bundling and easy use. Painted steel construction, infeed product guides with belts. Equipped with tunnel for the heat shrinking of the film. TECHNICAL DATA Net weight: Kg 2000 Length: mm 4040 Width: mm 1712 Height: mm 2200 Current: A 22 Frequency: 50 Hz Voltage: 400 volts Pressure: bar 6 Production characteristics: Mechanical speed: 15 bundles Packing material: PE Max sealing width: 440 mm Bundle length: 65-260 mm Bundle width: 100-440 mm Bundle height: 30-265 mm The air service unit consists of an oil mist lubricator and an automatic water separator. The controls and gages of the electrical control cabinet are centrally located and arran ...

Order No. 6752 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm - number of spindles 5: 1) horizontal lower 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (spindle 2 and 3) 11kW - 3 spindle electrically adjustable front / rear 4) horizontal top 230mm 11kW - 4 electrically adjustable spindle up / down 5) horizontal bottom 230mm 11kW - all spindles adjustable up / down, right left - all spindles equipped with electric brakes - diameter of the spindles 40mm - from above, introducing rollers, pulling, toothed 4 pcs, including 1 double - top pulling roller, rubber, double - metal pulling shaft at the bottom - pressure on the side - pneumatically pressed rollers - length of the introductory top 1960mm - adjustable top / bottom top - central lubrication - electric adjustment of the planing thickness - lifting motor about ...

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Equipment used for coating of food or pharmaceutical products. Non-tilting stainless steel turbine 2 liquid spraying ramps / 2 powder spraying ramps Complete installation with : - 2 x interchangeable spraying / coating arms including each: 1 liquid spraying ramp with double heating jacket + 1 powder spraying ramp. - Accurate unit dosing powder (screw system) - Galvanised steel frame / mobility rail for the 2 spray arms (easy switching) - Lateral unloading trolley - Ventilation / air treatment unit - 8 weights / scales on the feet - Electrical cabinet - 500 litre melting tank skid Max. load 3000 kg One-sided loading, Central unloading with reverse rotation Length 8 m x diam. 2.2 m + Documentation and drawings available

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Operating hours: 1,265 h 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control console for convenient set-up - Co ...

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 67700 € : 1354 € : 3100 mm : 10 mm : 10 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1460 mm : 1550 mm : 7500 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52100 € : 1042 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 3750 mm : 1180 mm : 1300 mm : 4000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad wa ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1074 € : 2550 mm : 8 mm : 8 mm : 6 mm : 220 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 4900 mm : 1100 mm : 1250 mm : 4600 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

PLC control, CPU module, central processing unit -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 942-7UA11 -Number: 1x module available -Dimensions: 45/195/H300 mm -Weight: 1.1kg