cavity used for sale

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Bottling line BARDI – 19LT PET Speed: 450 bph. PREFORMS tipper GENIUS – 2007. Blowing machine SIAPI (1 cavity) – 2007: Nr. 3 moulds: 10 LT – 15 LT – 18.9 LT. Filling monoblock BARDI – 2007. 3 bells for filters – PALL. Robot with interlayer and pallet magazine ACMI – 2010. Label marker and applicator for pallets VIDEOJET – 2016. Compressor 40 bar SIAD – 2007. Air tank 40 bar MTA – 2007. Dryer MTA – 2007. Chiller PIOVAN – 2007. Evaporation tower B.A.C. Bottle conveyor belts included. Various spare parts available.

Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of m ...

Fully electric machine with 2 stations and triple head 225mm stitch. Produced 5 ltr containers in triple cavity, approx. 27 containers per minute. Extruder S 120/24D. Max mould dimensions 735 mm wide and 580 mm high. Max opening 640 mm. Clamping force 190 kN. 460V 60 Huz. B&R control

Key data: 120

Extrusion line for manufacture of PS-PE-ABS-PP sheets etc ... Brand: Siepla Year of manufacture: 2008 Four-cylinder grille with servo-controllers Flat head: Maximum head width: 1000mm Maximum aperture up to: 2mm Minimum aperture: 200 microns Built-in shear for cutting plates. Two single-screw extruders: Ø 120mm and Ø 75mm MAAG melt pump and vertical pump: 1300 m3/h, 1350 rpm. Type: G160A Drag trolley Production capacity: 250 – 350 Kg/h Horizontal hydraulic changer with double cavity: Ø 16 mm. Manuals are available for each machine station as well as for compliance with EC directives.

Linco inside / outside washing machine of 16 units C.W. Unique in design , this machine has been developed by Linco to out-perform and surpass all the other machines available. Special adjustable nylon / stainless nozzles enter the bird to ensure thorough inside washing, no possible damage, and a positive opening in the neck cavity of the bird to ensure drainage. Water sprays on the outside of the bird remove any debris or stains left after eviscerating.

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

table length: 850 mm table width: 550 mm ampere: 70 A control: CNC MITSUBISHI 32bit axis stroke (X,Y,Z): 550 / 850 / 450 mm weight of the machine ca.: 6 t dimensions of the machine ca.: 2,4 x 2,65 x 2,68 m Spark Erosion Machine / Cavity Sinking EDM Machine The machine is in a very good condition. Equipment / Eccessories: - Y-travel at electrode change and loading position: 1180 mm - integrated C-axis working head speed adjustable: 10/20 rpm - integrated C-axis / working head measuring resolution: 0.001 mm - load capacity without changer: 50 kg - load capacity with changer: 10 kg - max. head load: 200 kg - max. distance tool carrier plate to work table: 585 cm - min. distance tool carrier plate to work table: 125 mm - working tank: - lifting tank dimensions (W x D x H ): 800 x 1100 x 480 mm - dielectric height programmable/automatic: 440 mm - filter cartridge version: cartridges integr ...

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

Stock # U2412-4 Unused carbon steel progressing cavity pump by Mono (UK) type E11B. Pump has reported output up to 1.5 m3/h. Working pressure up to 1.6 bar. Rotor works with 498 rpm. Inlet and outlet have diameter 50 mm. Pump is driven by el. motor 0.75 kW, 1425 rpm, 220-380 V, 50 hz. Technical documentation in digital form. New 2019. Never used.

This Blistering machine is characterised by fast and easy size change, precise reproducibility of all parameters, production safety for product and packaging material by indirect tool temperature maintenance at forming and sealing station, functional safety by cavity centering with roller web transport. Product feed by means of linear feeder, positive blister transfer without chain transport system. Available format sizes: – 14 tablets for blister: oval tablets size 26,5 x 12 x 10 mm, blister size 142 x 63 mm; – 6 tablets for blister: round tablets size 13 x 13 x 7 mm, blister size 120 x 53 mm; – 6 tablets for blister: round tablets size 12,5 x 12,5 x 7,5 mm; blister size 120 x 63 mm; – 15 tablets for blister: oval tablets size 27 x 12 x 10,5 mm; blister size 112 x 90 mm. Installed format size: – 10 tablets for blister: round tablets size 16,5 x 16, ...

Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs. -Weight: 32 kg

Air cushion or air cushion bags are characterized as particularly space-saving and clean packaging. Fill-Air air bag packaging systems feature a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They offer excellent protection and efficient cavity filling while at the same time reducing material and shipping costs. -Weight: 42 kg

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

Used Dairy Complete Line PET for water and Milk 9000 BPH 2010 Milk bottling line FRESH Milk bottling line Blower unit Blow Molding Machine SMIFORM SR6 Cavity rotary type This Milk bottling line has a neck of 38 plastic cups and is complete with all the auxiliary equipment for production like tilting lifting orienting preform and a chiller unit for cooling the mold section of the blower This Milk bottling line was used really little time only one shift two days a week and regular maintenance from skilled technicians Filling unit of the Milk bottling line With this blower unit in this Used Dairy Complete Line PET we have Triblock Metalnova making PET GLASS with double capping Plastic screw as part of the Monoblock and also Capper Twist Off stand alone for this Milk bottling line That allows the buyer to work both with Used Dairy Complete Line PET ultraclean solution in this Milk bottling l ...

Used Smiform SR12 Blow Molding Machine 2003 SMIFORM SR 12 CAVITY Constructed in 2003 but totally overhauled in 2018 and used very little It is in excellent condition Preform loader and tipper included Air conveyors included It does NOT come with a compressor [...for more information send your inquiry to the seller.] refno: SO91

Used Blow Molding Machine Smiform SR 6 2010 The Smiform SR 6 2010 is a used blow molding machine It produces plastic bottles or containers It has a 6 cavity preform loader a preforms tipper and an air recovery system The preforms have a 38 mm neck type The machine is ready for operations It also has safety features and comes with manuals Blow molding inflates a heated plastic tube to form a desired shape The Smiform SR 6 2010 is a rotary blow molding machine It produces bottles or containers by extruding molten plastic through a die and inflating it The preform loader and preforms tipper on the Smiform SR 6 2010 load and position the preforms The air recovery system on the machine recycles the air used in the inflation process The 38 mm neck type on the Smiform SR 6 2010 indicates the neck size and shape of the bottles or containers it produces The machine is in storage and not currently ...

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Fully rebuilt by Weiler in 2018. Characteristics: Output: 2800 containers per hour Molds and tooling for 100ml IV bags/bottles (12 cavity, 12 parison) included Eurocap cap welding machine with cap elevator Including: - new fill system - new extruder drive - new parison head - hydraulic system overhaul

travels: longitudinal 1650mm transverse: 810 mm vertical: 810 mm max. table load 1750 kg desk clamping area 1800 x 780 mm working feed 0-20000 mm.min rapid traverse 20000 mm.min spindles conical cavity ISO 50 speed range 30-6000 min. working feed 0-20000mm. min rapid traverse 20000mm.min distance of the forehead from the table surface 110-920mm main engine power 17.0 / 20.5 kW tool tray number of places in the magazine 2x16 max. tool diameter 130 mm max. tool diameter at free adjacent points 220 mm max. tool length 300mm max. tool weight 12kg total input 34.0kVA dimensions 4120x 2440x3700 mm weight 11400kg

STANDARD’s 700DD Series pumps are engineered to transfer viscous materials from drums, Intermediate Bulk Containers (IBC) and large storage vessels. Utilizing the principle of positive displacement, these pumps deliver a continuous flow of material with little product degradation. Pump is provided with a 1.5 kW TEFC electric motor. Technical Specifications: Design Progressive Cavity / Positive Displacement Max. Viscosity = 100,000 cps (mPas) Discharge Port 1½ (38 mm) Hose Barb Stator Materials PFTE Mechanical Seal SiC / Viton®/ SiC Immersion Length: 1120 mm Wetted Material Tube & Rotor Assembly: Stainless Steel 316 Stator Material PFTE Motor Drives IEC Fittings Threaded design enables operator to disassemble pump quickly for cleaning, maintenance and inspection Mounting Flange B14/C140-160 Max. Flow Rate: 26 LPM based on water Max. Discharge Pressure: 12 bar Max ...

Year of manufacture/SO/GO: 1988/-/2000 Table clamping dimensions - width x length 400x1400mm Maximum workpiece weight 800kg Working stroke - longitudinal, transverse, vertical 1000x400x400mm Conical cavity in the spindle ISO 150 Range of revolutions in the spindle - 18 degrees - manual 35-1800rpm-1 Working feeds - 16 degrees - longitudinal 10-1800mm.min-1 - transverse 10-1800mm.min-1 - vertical 2.5-450mm.min-1 Longitudinal rapid traverse 4000mm.min-1 - transverse 4000mm.min-1 - vertical 1000mm.min-1 Spindle electric motor - power 7.5kW Dimensions LxWxH 3180x3310x2400mm Weight including switchboard 4400kg.

Seepex eccentric cavity pump, BTI 17, with control cabinet with FU, built in 1994, 2-4 cbm/h, 8-24 bar, speed 70-130 rpm. , drive 9 kw., 400 V., with pre-shredder 640x360 mm inlet, incl. control cabinet in stainless steel

PET PREOFRM Injection Mold Hotrunner : PET Injection Mold Manufacturer: HUAYAN HR 61 Hotrunner from the manufacturer Husky Year of construction: 2010 General overhaul 2017 Sketch see PDF Cavity: 48 cavities Preform: 21.7 g (PCO 1881) with mould and thread set as well as cooling mould

Motorized Film Indexing Max. Film width 805 mm Double Heating:Top Heater 81.90 kW Lower Heater 54.60 kWGabler M92XL Thermoformer, age 2009, with Cup Mold for Ø95mm PP Cups, Sheet Sag Control Max. Form Area 765 x 436 mm Indramat Servomotor Plug Assist Max. Depth of draw 150 mm (optional 200 mm) Clamping pressure 380 kN Motor Drive Rating 81.90 kW Air Pressure 6 - 10 bar Max. dry cycle speed 52/ minGabler M92XL Thermoformer, age 2009, with Cup Mold for Ø95mm PP Cups, Bottom Platten with Tilting movement Inline Counter/ Stacker Unit Counted products delivered to delivery conveyor at 90degs. to machine direction Suitable for PS, PP, PVC, ABS, PLA, PET etc. Siemens S7 PLC Controls Siemens SIMATIC MULTI PANEL Touchpad Display Inclusive of PP Cup Mold for Ø95mm PP Cups, 22-Cavity and associated Stacking Parts

Used Blow Molding Machine KRONES Contiform C312 PRO Year 2016 Introducing the Blow Molding Machine KRONES Contiform C312 The KRONES Contiform C312 PRO blow molding machine manufactured in 2016 represents the pinnacle in the bottling industry Crafted by the renowned German company Krones this model delivers reliable high quality performance to meet the most demanding sector requirements Performance and Capacity of the Machinery Featuring a 12 cavity mold the Blow Molding Machine KRONES Contiform C312 operates at a maximum speed of 27 000 bottles per hour bph This remarkable production speed ensures a steady efficient flow thereby optimizing processing times and maximizing productivity Versatility and Adaptability of the Blow Molding Machine KRONES Contiform C312 Moreover its ability to adapt to various product types including square and round shapes makes the Contiform C312 PRO highly ver ...

Key data: 2600 kN

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Key data: 2600 kN

Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...

Key data: 1000 kN

Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of construction: 2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 470x470 mm Size of clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic, needle core pull, controlled by a proportional valve x 2 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Cavity pressure sensor Priamus Robot Wittmann W821 Year of construction: 2012 5-axis robots: 4 axes ...

Machine equipped for approx. 11,000 bottles per hour in 250 ml. Built in 2006. Extruder 100/24D. 6-fold head 70 mm stitch. With shapes. 2 bottles are produced in each cavity. 460V 60 Hz. Very good condition

Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, ...

Manufacturer: Netzsch Model: NL 40A Year : 1985 Type : Progressive cavity pump / Eccentric screw pump Power : 1,1 KW Capacity : approx. 2 m3 / h For liquid and semi-liquid products with or without solids.

MCFHD 80 CNC - TOS KUŘIM Machining center Medium correction made: 2021 System: TNC 407 Warranty: 6 months Availability: 1 month from order IN GEOMETRIC ACCURACY BY MANUFACTURER MCFHD 80 CNC - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 4,490 mm Overall width: 5,700 mm Overall height: 3,885 mm Gross weight: 20,500 kg Total power consumption: 75 kVA Working range: X-axis longitudinal stroke 1,000 mm Transverse stroke of the Y axis 750 mm Vertical stroke Z axis 750 mm Positioning the pallet clamping base ° 360 x 1 Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range continuously / 9 - 2,000 n. min-1 Ex. engine spindle. at 60/100% ED 23.5 / 27.5 (AC) kW Max. twisting mom. on the spindle. 1,000 Nm X - Y / Z feed range: Number of degrees / range continuously / 1 - 3,000  ...

FCQV 63 B CNC - TOS KUŘIM Table milling machine System: TNC 407 Warranty: 6 months Availability: 2 weeks from order We have the machine in stock FCQV 63 CNC B - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 5,900 mm Overall width: 3,600 mm Overall height: 3,400 mm Gross weight: 15,500 kg Number of places in the tool magazine: 40 pcs Total power consumption: 65 kVA Working range: X-axis longitudinal stroke 1,500 mm Transverse stroke of the Y axis 630 mm Vertical stroke Z axis 630 mm Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range continuously / 20 - 3,500 n / min Ex. spindle motor 27.4 kW Max. twisting mom. on the spindle. 1,000 Nm X - Y / Z feed range: Number of degrees / range continuously / 1 - 2,000 mm / min Rapid traverse 15,000 -15,000 / 10,000 mm / min  ...

FGS 50/63 - TOS KUŘIM Cantilever milling machine Horizontal / vertical axis milling New electrical switchboard + Print. panel Digital measuring of axes Overhaul 2021 Warranty: 12 months Availability: 3 weeks from order STATE OF THE MACHINE IN GEOMETRIC ACCURACY BY MANUFACTURER FGS 50/63 - Technical data: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500kg Total power consumption: 23 kVA Working range: X-axis longitudinal stroke 1,400 mm Transverse stroke of the Y axis 630 mm Vertical stroke Z axis 500 mm Working spindle: Cone of the cavity in the spindle ISO 50 Number of steps / speed range 18 / 35.5 - 1,800 n / min Ex. spindle motor 15 kW Max. twisting mom. on the spindle. 2,500 Nm X - Y / Z feed range: Number of degrees / range 16/10 - 1 800 / 2.5  ...