126,661 used machines on RESALE, but how to find them? Machine Search
Speed 1500 1/min, output 380-415 V (3-phase) 50 Hz Auction-ID: A1-46045-138
Equipped with Intel Xeon E5-2640 (1x), 32GB RAM, 8x Harddisk (3x 600GB, 3x 1.2TB, 2x 2TB). Auction-ID: A1-45979-431
Total height container 390 cm! Equipped with: 4000 liter fuel diesel tank (empty)( 3450x1250x2000 mm) Including: 20ft container. Auction-ID: A1-43429-70
40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12
30kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-14
Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...
Year of Make: 2019 Serial Number: 172242 Auction-ID: A1-46037-2894
Equipped with: extendable work platform, battery charger, hour meter, emergency stop Auction-ID: A1-40136-256
4WD, shaft stabilization, rotating superstructure, rotating work basket, 3 piece telescopic mast, max lifting height 19900mm, max lifting capacity 227kg Auction-ID: A1-40136-84
Equipped with: non-marking tires, emergency stop, hour meter, integrated charger, Auction-ID: A1-40136-236
Viewing by appointment Working condition Auction-ID: A1-43890-27
Viewing day by appointment Battery 2023 Auction-ID: A1-43890-12
Max snhelness: 2000, 20 LBS, diesel. Auction-ID: A1-40136-275
Brand product MERITALIA red leather upholstery Seat: W 50 x D 48 cm Seat height 42 cm Total width: 61 cm Total height: 78 cm Auction-ID: A7-46320-59
Brand product MERITALIA red leather upholstery Seat: W 50 x D 48 cm Seat height 42 cm Total width: 61 cm Total height: 78 cm Auction-ID: A7-46320-58
Brand product MERITALIA red leather upholstery Seat: W 50 x D 48 cm Seat height 42 cm Total width: 61 cm Total height: 78 cm Auction-ID: A7-46320-61
Brand product MERITALIA red leather upholstery Seat: W 50 x D 48 cm Seat height 42 cm Total width: 61 cm Total height: 78 cm Auction-ID: A7-46320-60
Equipped with: Genie GS-4069DC scissor lift (year 2017) with a maximum working height of approx. 14.3 m, platform capacity of 363 kg (2–3 people), own weight of approx. 5,000 kg, electric drive (48V), platform dimensions approx. 2.79 × 1.6 m with extendable deck of 1.52 m, transport dimensions approx. 3.12 × 1.75 × 2.08 m and a maximum climbing capacity of 35% Auction-ID: A1-40136-78
Serial Number: 160823 Year of Make: 2017 Auction-ID: A1-46037-2959
equipped with a breaker and a loading option, The table is in perfect condition, rarely used. After disassembly, it looks the same as before. Auction-ID: A7-46316-2
Year of manufacture: 2018 Serial Number: 165768 Auction-ID: A1-46037-2893
Unaudited Good condition Auction-ID: A7-46327-195
Steam generator PS400-60, electric heated stainless steel steam generator year of manufacture 2022, Factory inspection with the manufacturer 2026, 400 V / 60 kW / 50 Hz, 2-stage switchable (30 + 30 kW), max. operating pressure: 5 bar, adjustable operating pressure: 0 - 4 bar, max. steam amount: max. 84 kg/h (calculated value under optimal conditions), on a mobile frame, 1. Mechanical construction, The pot body is made of stainless steel 1.4571 and electrically welded. In, Kettle bodies are heating elements screwed in. The kettle body is located in a, Stainless steel housing and is clad with thermal insulation. In the stainless steel housing, the control cabinet is also located here. fittings (e.g.: steam outlet, water inlet,, etc.) lie outside the housing, 2. Functionality, Feedwater is pushed into the steam boiler by a water inlet valve. Is, when the intended water level is reached, the ...
Key data: 710 KW
Nei pebbles Ltd electrical machine cage rotor induction motor output 710 KW machine designed for heavy-duty applications, often utilized for driving compressors, fans, or pumps
; Power [PS]: 170; Gross weight [kg]: 3701; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x100kW, 1x30kW, - AC copper: 3P/4W, 100kW, - DC socket: 60kW, Power Output:, - AC socket: 3P/5W, 1x100kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 100k
Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360
Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 32 mm, Bolt center: Ã 25 mm, Bottom bolt: Ã 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!
BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 32 mm, Bolt center: Ã 25 mm, Bottom bolt: Ã 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!
BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ã 32 mm, Bolt center: Ã 25 mm, Bottom bolt: Ã 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!
maximum number of results exceeded
please refine your search
7.000 € 
