135,628 used machines on RESALE, but how to find them? Machine Search
8 Pieces Diesel Power Generator Engine Type: Caterpillar 3516 Power: 1825 kVA each Year: 2011 2024/2025 newly built and tested machine sets, no operating hours after that! Cooling: Water with radiator cooler Speed: 1500 1/min Generator: Caterpillar SR5 Voltage: 400/231 V, 50 Hz With EMCP 3.2 controller Subject to prior sale - errors possible! Internal reference number: E-1004-110
Key data: 648 KW, 810 kVA
Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.
Key data: 648 KW, 810 kVA
Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.
Key data: 1237 KW, 1650 kVA, 10500 V
Introducing the new Caterpillar Gas Generator, Model CG 170-12, manufactured in March 2017. This generator is in new and unused condition, with the following specifications: - Power: 1237 kW - Speed: 1500 RPM - Alternator: Marelli Motori (Made in Italy) - Output: 1650 kVA - Voltage: 10,500 - Frequency: 50 Hz - Serial Number: 2213373 If you have any questions, please get in touch with us. #caterpillar #energy #power #gas #gasgenerator #new
Key data: 305 KW, 415 V
4 x Caterpillar G3412 low-hour Natural Gas Generator Sets available: 1 x 300 hrs 1 x 315 hrs 1x 2138 hrs 1 x 13,187 hrs Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel . Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
29.000 hours since overhaul, Total hrs 62.568, KWe: 2000, Voltage: 11000
Key data: 200 KW, 250 kVA, 400 V
Olympian Caterpillar Diesel generator in good condition. It has the following specifications: Power: 200kVA/ 200kW Year: 2009 Hours: 7000 approximately. Soundproof chamber with control panel. Video of operation available upon request
Key data: 900 KW
Make: Caterpillar Model: 3516E Mfg year: 2021 Condition: Unused Serial Number: ND900120 Arrangement Number: 5593393 Power: 900 kW Located in the USA
Key data: 480 KW, 600 kVA, 400 V
USED GAS GENERATOR SET MAKE: CATERPILLAR TYPE: G3508 RATING: 480KW M. YEAR: 2007 HOURS: 40.000 ALTERNATOR: SR4, 400V, 50HZ SCOPE: GENSET, GAS STREET, CONTROL PANEL
Key data: 1424 KW, 1840 kVA, 450 V
Make: Caterpillar Model: 3512B Ser no: S2H00367 and S2H00369 Ar no: 2322504 Power: 1424 Alternator: Leroy Somer Made in France. Mfg year: 2016 Frequency: 60 Hz Speed: 1800 RPM Voltage: 450 V Power: 1840 kVA Number of sets: 2 Unused
Caterpillar Gas Generator G3516A From 2001 Year of Manufacture these 2 x Caterpillar units are robust and high-performance power generation unit, designed for industrial and commercial applications. This model of generator is part of Caterpillar's well-regarded G3500 series and is engineered to provide reliable, efficient power in demanding environments. Key Specifications: Model: G3516A Year of Manufacture: 2001 Output: 1 MW Rated Speed: 1500 RPM Voltage Output: 400V Frequency: 50 Hz Fuel Type: Gas Engine Type: 6-cylinder, turbocharged, and aftercooled Cooling System: Liquid-cooled Performance and Efficiency: The G3516A is built to provide stable power output with minimal emissions. Its turbocharged and aftercooled engine ensures efficient operation even under high-load conditions. The generator operates at a steady 1500 RPM, ensuring smooth and cons ...
ID3219 Caterpillar 928G year/Year of construction 2004 approx. 9250 hours/hours 14 t Bucket with cutting edge, fork, hydraulic quick hitch, tyres 100/40 % good Shovel with cutting edge, fork, hydr. Quick coupler, tyres 100/40% good
Key data: 1200 V, 400
2 x Caterpillar G3516C CHP Generating Sets. Complete 2.4MW plant ready for dismantling and delivery: 1 x 16,000 hrs 1 x 19,000 hrs Fuel: Natural gas Frequency: 50 Hz Scope of supply: Complete CHP plant including Engine, Alternator, Base Frame, Gas Line, Control Panels, CHP components including Exhaust Gas Heat Exchangers and Water Plate Heat Exchangers, Pumps, Pipes, Radiators and Ancillaries. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
Key data: 2500 KW, 11 kVA
Caterpillar G3520H Natural Gas Generator – Factory Rebuilt | 0 Hours Since Rebuild Premium 2.5 MW Natural Gas Power Generation Available now is a factory-standard rebuilt Caterpillar G3520H Natural Gas Generator, professionally rebuilt by an authorized Caterpillar dealer and returned to as-new condition. With 0 operating hours since rebuild, this generator is ready for immediate installation and reliable service. Whether you're expanding a power plant, supporting industrial operations, or adding standby generation capacity, this CAT G3520H delivers exceptional performance, efficiency, and reliability. Key Specifications Model: Caterpillar G3520H Natural Gas Generator Series: CAT 3520H Engine: 20-cylinder V-type, turbocharged & aftercooled Displacement: 95 litres Rated Output: Up to 2,500 kW Operating Speed: 1,500 RPM Fuel Type: Natural Gas Voltage: Up to 11 kV Contro ...
29950 hours since overhaul, 10.500 V, KWe: 1000, Working hours: 29950
Manufacturer: MWM / Caterpillar Model: TCG 2020 V12 K Type of machine: CHP Module Fuel: gas Electrical power: approximately 0.9 MW Thermal performance: approximately 1.1 MW Year of construction: 2014 Generator type: Marelli MJB 450 LB4 Last service: 04/2025 E70 maintenance pending for both modules Module 1 : - Current operating hours: approximately 65,000 hours - Number of starts: 4,384 as of April 2025 - Maintenance E40: 1/2024 at 56,215 hours - Last engine operation: 05-2026 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Module 2 - Current operating hours: approximately 60,000 hours - Number of starts: 3,911 as of January 2025 - Maintenance E40: 01-2025 at 56,141 hours - Last engine operation: 05-2025 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Find ...
BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...
used
Caterpillar diesel power plant consisting of 8 generating sets rated at 2,000 kVA each, in excellent operating condition. Technical Specifications Quantity: 8 Generator Sets Rated Output: 2,000 kVA each Engine Model: Caterpillar 3516A Alternator: SR4 Cooling System: Skid-mounted radiators Operating Hours: Approximately 9,000 hours per unit Control Panels: Included Dry-Type Transformer: Included Exhaust System: Included
Caterpillar Model 3516B generator set, 2015 model year. Rated power: 2,281 kVA, 1,825 kW; rated voltage: 13,800 V; rated frequency: 60 Hz; rated RPM: 1,800. Never used; started only for testing purposes.
Key data: 1825 KW, 2281 kVA, 13 V
Five (5) Surplus Caterpillar 3516B, 1825 kW Prime, 13,800v. 60 Hz. 3 Phase, 0.8 P.F. Diesel Generator sets. These 2281 kVA Prime, Diesel generator sets for continuous parallel. They were manufactured in 2013 and were never used. They come with a electric starter 24v. prelube pump, Jacket Water Heater, Fuel filter, Air Filter, radiator cooled, Paralleling control system, 2760 frame generator, exhaust system with catalyst, open skids
Key data: 2000 KW, 11000 V
Caterpillar G3516H — 2 MW Gas Generator Sets with CHP We are offering for sale 2 × Caterpillar G3516H packaged gas generator sets equipped with a cogeneration (CHP) system for heat recovery. Main Specifications Manufacturer: Caterpillar Model: G3516H Electrical Power: 2,000 kW / 2 MW each Voltage: 11,000 V Year of Manufacture: 2014 Configuration: Packaged Application: Natural gas power generation / CHP CHP System: Heat recovery / cogeneration Operating Hours: 14,000 h Quantity: 2 units available Condition: Used Both units are available as a matching package and are suitable for industrial power generation projects where electricity and useful heat recovery are required. Upon request, we can provide: Equipment photographs Videos of the units in operation Technical documentation Detailed scope of supply Information and documentation regarding the heat recovery / CH ...
Key data: 1000 KW, 400 V
2 × Caterpillar G3516 – 1 MW Gas Engine Generator Sets We offer two new Caterpillar G3516 gas engine generator sets, available for sale as a package or individually. Both units are new and have never been operated, making them suitable for projects requiring reliable gas-fired power generation with minimal commissioning risk. Technical Specifications Manufacturer: Caterpillar Model: G3516 Quantity: 2 units Electrical Output: 1,000 kW / 1 MW per unit Total Available Capacity: 2 MW Voltage: 400 V Frequency: 50 Hz Year of Manufacture: 2018 Condition: New, never operated The two units can be purchased individually or together, depending on project requirements. Additional Information Upon request, we can provide: • Detailed equipment photographs • Technical documentation • Videos • Full scope of supply • Commercial quotation Please contact ...
ID3853 Caterpillar 318D MH year/Baujahr 2012 14.000 hours/hours Material handler, elevating cab, 4 outriggers, solid rubber tires, with SMP quick coupler, optional sorting grab Material handler, elevating cab, 4 outriggers, solid rubber tires, with SMP quick coupler, optional sorting grapple
Year of Make: 2015 Operating hours: 1,537 hours Weight: 1,690 kg Engine power: 17.7 hp / 13.2 kW Displacement: 1,116 l Cylinders: 3 Track adjustment Rubber tracks Dozer blade Air conditioning E-Compliance EPA Certification Original color Radio Quick coupler 3x backhoe bucket Joystick control Hydraulic hammer/scissor circuit Rotating beacon
Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine
We sell new bagel machines
metal band saw blade, band saw blade, metal saw band -unused original packaging -Number: 10x sheets available -Price per piece -Toothing: 5 -Dimensions: 3660 x 26 x 1.1mm -Weight: 0.7kg/pcs
Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool for: press brake -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg
Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.
used
AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de
Material: Steel Engine: 15 kW Other data and price on inquiry. You can also get the entire system with all components.
ORDER NO. 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max disc diameter 350mm - disc bore diameter 80mm - max cutting height 120mm - table top size 2040x840mm in advance: - ratchets - pulling shaft, toothed - ratchets - smooth sliding shaft - shaft with saws - slip shaft, pressure shaft bottom: - 2 rolls in front of the table top - guide - ratchets - caterpillar - central lubrication of the track - electric shaft lifting with saws 0.55kW - electric body lifting 0,55kW - smooth regulation of the feed speed - diameter of the extraction connection 140,125mm - main motor 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight about 4000kg ADVANTAGES – Czech production – 2 slip rollers in the countertop – used multisaw – very good condition Net price: 62900 PLN Net price: 13978 EUR depending on the price 4,50 EUR ...
used
<br><br><br>Still in operation: Yes<br>Available: immediately
KUKA KR360 control VKRC2 built in 2004 Condition good Reach 2900mm Weight 2245kg Load 360kg Control VKRC2 Weight 185kg Software version V4. 1 7 SP08 KUKA VKCP2 Connection cables 7 m or 15 m Availability immediately several available, preferably in larger quantities .
KUKA robot KR360-2 (repainted) Built in 2007 Range 2800mm Load 360kg Weight 2350kg KUKA control KRC2ed05 Weight 185kg Software V5. 4.11 KUKA KCP2ed05 KUKA set Several Creative Commons as long sleeve KR360L280 .
Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300
Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!
Size max 480 x 320 mm Speed max 18,000 c / h Equipment 1 feeder 3681
Sale of parts and assemblies ex large area mower Shibaura CM 364: Diesel engine 25 kw / hydrostatic transmission / axles / electric / cabin / wheels and more. no mower-deck.
Built in 1997 Product thickness max 85 mm Speed max 12.000 c/h Equipment o 18 stations ; working condition
Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg
6-Achsenmessgelenkarmsystem Manufacturer: Zett-mess Type of machine: AMPG - 36 p Year of construction: 2003 2 same facilities are available. The price is for a plant. All information without guarantee
Size max 350 x 440 mm min 146 x 103 mm format trimmed max 310 x 420 mm min 140 x 100 mm Product thickness max 70 mm min 3 mm power max 6,600 c/h equipment o Ribbon supply o Zubehoer for format change: o 1 set of press plates and holders o 1 set table tops / bars o 1 set of plate tables o 3 set cutting strips o 2 knife seeds o Info: with cassettes ; ready for operation
motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible
maximum number of results exceeded
please refine your search
