134,098 used machines on RESALE, but how to find them? Machine Search
Key data: 648 KW, 810 kVA
Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.
Key data: 648 KW, 810 kVA
Caterpillar 3412C Generator Sets – 2014, Unused • Quantity: 9 units • Prime Power: 810 kVA / 648 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3412C diesel • Condition: Unused, factory new Key Features: IP22 protection, H insulation, standard CAT excitation, suitable for industrial continuous-duty applications in 50 Hz markets. Caterpillar 3406C Generator Sets – 2014, Unused • Quantity: 5 units • Prime Power: 275 kVA / 220 kW • Voltage / Phase: 400/230 V, 3‑phase • Frequency / Speed: 50 Hz, 1500 RPM • Power Factor: 0.8 • Engine: CAT 3406C diesel • Condition: Unused, factory new Key Features: IP23 enclosure, H insulation, star-connected generator, ambient rating up to 50°C.
Key data: 1237 KW, 1650 kVA, 10500 V
Introducing the new Caterpillar Gas Generator, Model CG 170-12, manufactured in March 2017. This generator is in new and unused condition, with the following specifications: - Power: 1237 kW - Speed: 1500 RPM - Alternator: Marelli Motori (Made in Italy) - Output: 1650 kVA - Voltage: 10,500 - Frequency: 50 Hz - Serial Number: 2213373 If you have any questions, please get in touch with us. #caterpillar #energy #power #gas #gasgenerator #new
Key data: 305 KW, 415 V
4 x Caterpillar G3412 low-hour Natural Gas Generator Sets available: 1 x 300 hrs 1 x 315 hrs 1x 2138 hrs 1 x 13,187 hrs Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel . Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
29.000 hours since overhaul, Total hrs 62.568, KWe: 2000, Voltage: 11000
Key data: 200 KW, 250 kVA, 400 V
Olympian Caterpillar Diesel generator in good condition. It has the following specifications: Power: 200kVA/ 200kW Year: 2009 Hours: 7000 approximately. Soundproof chamber with control panel. Video of operation available upon request
Key data: 900 KW
Make: Caterpillar Model: 3516E Mfg year: 2021 Condition: Unused Serial Number: ND900120 Arrangement Number: 5593393 Power: 900 kW Located in the USA
Key data: 480 KW, 600 kVA, 400 V
USED GAS GENERATOR SET MAKE: CATERPILLAR TYPE: G3508 RATING: 480KW M. YEAR: 2007 HOURS: 40.000 ALTERNATOR: SR4, 400V, 50HZ SCOPE: GENSET, GAS STREET, CONTROL PANEL
Key data: 4600 KW, 5500 kVA, 11200 V
Engine details: Make: Caterpillar Model: 3616 Mfg Year: 2009 Type: V-16, 4 cycle Serial no: 1PD00596 Ar no: 1593616 Power: 4600 KW RPM: 900 Rotation: CCW Weight: 28,500 kg Alternator details: Make: Kato Type: 8P12-4700 Model no: AA28295000 Power: 5500 KVA Voltage: 6466/11200 Phase: 3 Frequency: 60 Hz Quantity: 8 sets Weight: 25,946 kgs
Key data: 1424 KW, 1840 kVA, 450 V
Make: Caterpillar Model: 3512B Ser no: S2H00367 and S2H00369 Ar no: 2322504 Power: 1424 Alternator: Leroy Somer Made in France. Mfg year: 2016 Frequency: 60 Hz Speed: 1800 RPM Voltage: 450 V Power: 1840 kVA Number of sets: 2 Unused
Caterpillar Gas Generator G3516A From 2001 Year of Manufacture these 2 x Caterpillar units are robust and high-performance power generation unit, designed for industrial and commercial applications. This model of generator is part of Caterpillar's well-regarded G3500 series and is engineered to provide reliable, efficient power in demanding environments. Key Specifications: Model: G3516A Year of Manufacture: 2001 Output: 1 MW Rated Speed: 1500 RPM Voltage Output: 400V Frequency: 50 Hz Fuel Type: Gas Engine Type: 6-cylinder, turbocharged, and aftercooled Cooling System: Liquid-cooled Performance and Efficiency: The G3516A is built to provide stable power output with minimal emissions. Its turbocharged and aftercooled engine ensures efficient operation even under high-load conditions. The generator operates at a steady 1500 RPM, ensuring smooth and cons ...
ID3219 Caterpillar 928G year/Year of construction 2004 approx. 9250 hours/hours 14 t Bucket with cutting edge, fork, hydraulic quick hitch, tyres 100/40 % good Shovel with cutting edge, fork, hydr. Quick coupler, tyres 100/40% good
Key data: 1200 V, 400
2 x Caterpillar G3516C CHP Generating Sets. Complete 2.4MW plant ready for dismantling and delivery: 1 x 16,000 hrs 1 x 19,000 hrs Fuel: Natural gas Frequency: 50 Hz Scope of supply: Complete CHP plant including Engine, Alternator, Base Frame, Gas Line, Control Panels, CHP components including Exhaust Gas Heat Exchangers and Water Plate Heat Exchangers, Pumps, Pipes, Radiators and Ancillaries. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
Key data: 2500 KW, 11 kVA
Caterpillar G3520H Natural Gas Generator – Factory Rebuilt | 0 Hours Since Rebuild Premium 2.5 MW Natural Gas Power Generation Available now is a factory-standard rebuilt Caterpillar G3520H Natural Gas Generator, professionally rebuilt by an authorized Caterpillar dealer and returned to as-new condition. With 0 operating hours since rebuild, this generator is ready for immediate installation and reliable service. Whether you're expanding a power plant, supporting industrial operations, or adding standby generation capacity, this CAT G3520H delivers exceptional performance, efficiency, and reliability. Key Specifications Model: Caterpillar G3520H Natural Gas Generator Series: CAT 3520H Engine: 20-cylinder V-type, turbocharged & aftercooled Displacement: 95 litres Rated Output: Up to 2,500 kW Operating Speed: 1,500 RPM Fuel Type: Natural Gas Voltage: Up to 11 kV Contro ...
29950 hours since overhaul, 10.500 V, KWe: 1000, Working hours: 29950
Manufacturer: MWM / Caterpillar Model: TCG 2020 V12 K Type of machine: CHP Module Fuel: gas Electrical power: approximately 0.9 MW Thermal performance: approximately 1.1 MW Year of construction: 2014 Generator type: Marelli MJB 450 LB4 Last service: 04/2025 E70 maintenance pending for both modules Module 1 : - Current operating hours: approximately 65,000 hours - Number of starts: 4,384 as of April 2025 - Maintenance E40: 1/2024 at 56,215 hours - Last engine operation: 05-2026 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Module 2 - Current operating hours: approximately 60,000 hours - Number of starts: 3,911 as of January 2025 - Maintenance E40: 01-2025 at 56,141 hours - Last engine operation: 05-2025 - Condition: basically ready for use and complete, but not in operation due to a defective generator switch Find ...
BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...
used
Caterpillar diesel power plant consisting of 8 generating sets rated at 2,000 kVA each, in excellent operating condition. Technical Specifications Quantity: 8 Generator Sets Rated Output: 2,000 kVA each Engine Model: Caterpillar 3516A Alternator: SR4 Cooling System: Skid-mounted radiators Operating Hours: Approximately 9,000 hours per unit Control Panels: Included Dry-Type Transformer: Included Exhaust System: Included
Key data: 1825 KW, 2281 kVA, 13 V
Five (5) Surplus Caterpillar 3516B, 1825 kW Prime, 13,800v. 60 Hz. 3 Phase, 0.8 P.F. Diesel Generator sets. These 2281 kVA Prime, Diesel generator sets for continuous parallel. They were manufactured in 2013 and were never used. They come with a electric starter 24v. prelube pump, Jacket Water Heater, Fuel filter, Air Filter, radiator cooled, Paralleling control system, 2760 frame generator, exhaust system with catalyst, open skids
Caterpillar Model 3516B generator set, 2015 model year. Rated power: 2,281 kVA, 1,825 kW; rated voltage: 13,800 V; rated frequency: 60 Hz; rated RPM: 1,800. Never used; started only for testing purposes.
Key data: 2000 KW, 11000 V
Caterpillar G3516H — 2 MW Gas Generator Sets with CHP We are offering for sale 2 × Caterpillar G3516H packaged gas generator sets equipped with a cogeneration (CHP) system for heat recovery. Main Specifications Manufacturer: Caterpillar Model: G3516H Electrical Power: 2,000 kW / 2 MW each Voltage: 11,000 V Year of Manufacture: 2014 Configuration: Packaged Application: Natural gas power generation / CHP CHP System: Heat recovery / cogeneration Operating Hours: 14,000 h Quantity: 2 units available Condition: Used Both units are available as a matching package and are suitable for industrial power generation projects where electricity and useful heat recovery are required. Upon request, we can provide: Equipment photographs Videos of the units in operation Technical documentation Detailed scope of supply Information and documentation regarding the heat recovery / CH ...
Key data: 1000 KW, 400 V
2 × Caterpillar G3516 – 1 MW Gas Engine Generator Sets We offer two new Caterpillar G3516 gas engine generator sets, available for sale as a package or individually. Both units are new and have never been operated, making them suitable for projects requiring reliable gas-fired power generation with minimal commissioning risk. Technical Specifications Manufacturer: Caterpillar Model: G3516 Quantity: 2 units Electrical Output: 1,000 kW / 1 MW per unit Total Available Capacity: 2 MW Voltage: 400 V Frequency: 50 Hz Year of Manufacture: 2018 Condition: New, never operated The two units can be purchased individually or together, depending on project requirements. Additional Information Upon request, we can provide: • Detailed equipment photographs • Technical documentation • Videos • Full scope of supply • Commercial quotation Please contact ...
ID3853 Caterpillar 318D MH year/Baujahr 2012 14.000 hours/hours Material handler, elevating cab, 4 outriggers, solid rubber tires, with SMP quick coupler, optional sorting grab Material handler, elevating cab, 4 outriggers, solid rubber tires, with SMP quick coupler, optional sorting grapple
forklift available Auction-ID: A1-47360-106
Crawler axle, crawler chassis, mini excavator, tracked excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -tensioning cylinder
-Mechanical quick coupler -Tooth tray -Hammer lines -Push blade -Tracks with rubber pads -No documents Auction-ID: A3-46151-179
Various spare parts for construction machinery, suitable for Hitachi and much more. Wiring harnesses, accumulators, gears, valve blocks, sleeves, pulleys, etc. Incl. pallet 120x80x45, kg 215, Forklifts available, Viewing desired. Auction-ID: A1-49681-42
8 different drive shafts ZF Rockwell for Hitachi / Cat, Incl. pallet dimensions 120x80x34, 155Kg, Forklifts available, Viewing desired . Auction-ID: A1-49681-14
Rexroth A10VO60, Cat 468-982201 / R902489306, Pallet 60x80x34, 45Kg, Forklifts available, Viewing desired. Auction-ID: A1-49681-23
Rexroth A10VO71 / A10VO60 / A10VO45 - R902476619 / R902403404 / R902403422 Incl. pallet 60x80x47, 80Kg, Forklifts available, Viewing desired. Auction-ID: A1-49681-19
Year of manufacture 2005 Weight 2700 kg Lifting capacity 2000 kg Battery built in 2012 Full free lift Sideshift Display and drive wheel has just been renewed, bill available approx. 1500€ Stacker is in very good condition! No oil leakage! Everything works ! Auction-ID: A1-49710-2
Viewing by appointment Extra options : Non-marking tires , lighting , joystick control Auction-ID: A1-40397-13
CAT0323FKKBY00193 engine power - 122kW, working hours - 9783h, 3 buckets Auction-ID: A7-49328-4
Caterpillar / Verachtert CW05 mechanical quick coupler – CAT 272-1362 – 2016 Specifications: Brand: Caterpillar / Verachtert Type: CW05 Model/Part Number: 272-1362 Year of construction: 2016 Version: mechanical quick coupler Tool mount: Verachtert CW05 Machine side pen size: approx. Ø30 mm Stick/inner size: approx. 105 mm Center-to-center pen spacing: approx. 130 mm Dimensions: approx. 0.50 x 0.35 x 0.35 m Own weight: approx. 21 kg Condition: Used Features: Mechanical locking Integrated lifting eye on the top Particularities: This version is used on machines from the Caterpillar 301 series, among others. Auction-ID: A1-47388-191
Equipped with 3-Cil. \"Caterpillar\" Diesel Engine; CW05 hydraulic quick coupler; additional hydraulic function; articulated boom; hydraulic sliding board; width-adjustable tracked undercarriage; 3 New \"Verachtert\" excavator buckets: 100/22/40 cm; tilting caine Auction-ID: A1-47388-33
Backhoe bucket with teeth 700mm, extra hydraulic function, sliding blade, 2nd travel speed ( low power ), Auction-ID: A1-47388-67
-Tooth tray -Hammer lines -Push blade -Tracks with rubber pads -No documents Auction-ID: A1-49343-12
-Mechanical quick coupler -Tooth tray -Hammer lines -Push blade -Tracks with rubber pads -No documents Auction-ID: A1-49343-13
Caterpillar 740 powershift transmission – 7F/1R – including transport frame Specifications: Brand: Caterpillar Application: Caterpillar 740 Part: complete transmission Type: planetary powershift Gears: 7 forward / 1 reverse Operation: electro-hydraulic Casting/house number: 6Y9577-03 Dimensions: approx. 1.30 x 0.80 x 1.20 m (L x W x H) Features: Electro-hydraulic control/switch block Solenoids Hydraulic lines and connections Various mounting points Integrated lifting eye Steel transport/storage frame Particularities: Suitable for use in Caterpillar 740 articulated dump trucks. Auction-ID: A1-47388-194
Transmission problems, does not shift properly. Auction-ID: A1-47388-17
Caterpillar / Zeppelin GLV hydraulic ditch bucket 1,200 mm CW05 – 2023 Specifications: Brand: Caterpillar / Zeppelin Type: GLV Version: hydraulic tilting locks/finishing bucket Year of construction: 2023 Serial Number: 45671-1C Suitable for: CAT 302.7 Quick change connection: Verachtert CW05 Work/cutting width: 1,200 mm Capacity: 120 litres Dimensions: approx. 1,200 x 500 x 700 mm (WxDxH) Own weight: 160 kg Manufacturer: Resch-Ka-Tec GmbH, Germany Features: Hydraulic tilting mechanism Hydraulic hoses and connections Verachtert CW05 quick-change connection CE marking Particularities: Condition: unused Loading on transport of the buyer is possible. Forklift is available on site. Auction-ID: A1-47388-190
Year & Manufacturer: 2011 - Caterpillar Model: D7E Hours: 13,000 h Tracks: Good condition Engine: Good condition Defect: Engine insulation 2 Width without blade (mm): 3000 Notes: Disassembly of the blade and loading at the expense of the seller. Auction-ID: A1-49695-245
Caterpillar Hydraulic Stabilizer Bar – M313D / M314F / M315D / M315F / M316F / M317D – 2021 Specifications: Brand: Caterpillar / CAT Part: hydraulic stabilizer bar/stabilizer assembly/outriggers Version: double hydraulic outriggers Number of outriggers: 2 Operation: hydraulic Condition: Used Suitable for CAT M313D Suitable for CAT M314F Suitable for CAT M315D Suitable for CAT M315F Suitable for CAT M316F Suitable for CAT M317D Features: Two hydraulically operated, fold-down outriggers Hydraulic cylinders Hydraulic hoses and connections Integrated pivot points Wide steel outrigger pads Central steel crossbar Particularities: From the undercarriage configuration of Caterpillar wheeled excavators. A forklift truck is present on site with which the lot can be loaded onto the buyer's means of transport. Auction-ID: A1-47388-196
maximum number of results exceeded
please refine your search
300 € 
