132,178 used machines on RESALE, but how to find them? Machine Search
Diosna Wendelkneter Type: W120 Carousel 4 stainless steel boilers with lifting tipper with control cabinet Carousel Painted
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...
Centrifugal pump with magnetic coupling.
Centrifugal pump with magnetic coupling.
UNUSED STERLING SIHI GMBH CBSD 040160-150 CBBK31R000 CENTRIFUGAL PUMP
Compact diaphragm pump manufactured by ABEL in 2001 model CM-G-C261
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.
Construction 1976 Capacity 150 l , all Complete , ready for immediate use
Centrifugal pump with magnetic coupling.
Centrifugal pump with magnetic coupling.
Process pump manufactured by STERLING SIHI.
Process pump manufactured by STERLING SIHI.
USED STERLING SIHI CBSA 065250 CHEMICAL PROCESS CENTRIFUGAL PUMP
; Gross weight [kg]: 3621; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640
UNUSED STERLING SIHI GMBH CBED 065200-187 CF 3AE 4B 2 CHEMICAL PROCESS CENTRIFUGAL PUMP
Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...
1 of used motion controller, make Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM-tested OK. PS: we can potentially upload your machine program onto this controller, as well as provide further related troubleshooting and issue-resolving service.
1 used motion controller, manufacturer Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM tested OK. PS: We may be able to upload your machine program to this controller and provide other related troubleshooting and resolving services.
all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control
Eillert C25 H Potato rumbler Serial: 4149308 Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph
all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm
sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...
used
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...
; Gross weight [kg]: 3400; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 995
; Gross weight [kg]: 1730; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 620; Maximum lift capacity [kg]: 350
; Gross weight [kg]: 2330; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450
NNP Pneumatic grid cutter Stainless pneumatic cutter, ideal for fruit and veg, mobile frame
NNP Vibratory conveyor Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph
Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph
Used SB Machines LZ1-CIP liquid filling line. New 2020. The line includes: 1. LZ1-CIP filling line – This machine is designed for the automatic filling of milk and other liquid products. For filling products with capacities of: 250 ml, 500 ml, 1 L 2. ECA-08 label applicator – for applying single labels to cylindrical containers such as bottles and plastic containers. The label applicator uses paper labels. Manufacturer: Świdnik Trade Year of manufacture: 2016 Power supply: 220/380V, 10A Capacity: 0 ± 6000 units/hour Container diameter: min. Ø 50mm; max. Ø 100mm 3. Automatic wrapping machine – The machine is designed to arrange bottles delivered by a conveyor into packs of 6 or 8 pieces (in two rows), then wrap them in heat-shrink film and move them to a shrink tunnel. Manufacturer: Drewmet s.c. Power supply: 400V, 50Hz Capacity: 0 ± 3000 pcs/h Package dia ...
Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.
maximum number of results exceeded
please refine your search
