caterpillar 3516 c used for sale

X16374-150 Office Container with Equipment Description: Manufacturer: Kunert Mobilheime Model: Office Expo Camping Cabin Dimensions 599 x 394 cm Standard Equipment: Facade: KUU Entrance Door 1525 x 2020 mm PLB-UNS Set of PVC Windows with Double Glazing in Anthracite 1JR Safety Glass in High Windows C4T 400V Power Connection with Plug OEY Exterior Lighting - 6 Points 24E Kerrafront Trend Facade VIN Vinylit Shadow Facade YXD EPDM Roof Interior Fittings: UD5 Curtain Rods and Drapes 9J2 PVC Flooring 8EY Glued Flooring PAA Complete Electrical Installation MF7 Computer Socket Z63 LED Ceiling Lighting G2Y Interior Door 700, White, Steel Frames OFU Pre-Electric Heating Office: MYW Table 1140 x 690 mm YBW TV Socket with Power Outlet 9DO Wall-Hung Shelf D8S Catalogue Rack W1Y Kitchen Set SG3 Built-in Under-Counter Refrigerator 81N Pendant Lamp X75 Sli ...

OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton Erector/ Bottom Flap folder & adhesive tape Bottom flap sealer, Carton top Flap Openner & PE Film Carton Liner from a Roll of Film Full Stainless Steel Construction, Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll., Carton Sizes: L x W x H, 250 mm x 200 mm x 150 mm (min), 600 mm x 475 mm x 600 mm (max) Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls, Condition: as new, Immediately available EXW our Warehouse Enger, Germany, Length: 200 to 600 mm, Width: 200 to 500 mm, Carton size min.: 250 mm x 200 mm x 150 mm, Carton Size max.: 600 mm x 475 mm x 600 mm

Manufacturer:SKADEC Model: CW-C22R1722AP Year of Manufacture : 2023 Dimensions: 5450 x 2350 x 2350 mm Weight: 3142.0 kg Rated Voltage: 400/50/3 V/Hz/Ph Maximum Current: 125.0 A Cooling Capacity: 171.6 kW Power Consumption: 43.66 kW EER: 3.93 Refrigerant: R290 (Natural, environmentally friendly) Refrigeration Circuits: 2 independent circuits Compressors: 2x frequency-controlled (25-70Hz variable speed) Technical Data Design Point: - Cooling capacity: 171.6 kW - Power consumption: 43.66 kW - EER: 3.93 - Design frequency (for VFD compressor): 60 Hz - Ambient temperature: +35 degrees C - Medium temperature inlet/outlet: +18 / +14 degrees C BAFA Setpoint: - Cooling capacity: 141.6 kW - Power consumption: 42.05 kW - EER: 3.36 - Design frequency (for VFD compressor): 67 Hz - Ambient temperature: +35 degrees C - Medium temperature inlet/outlet: +13 / +7 degrees C General: - Refrige ...

turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante NICOLÁS CORREA Modelo L30-43 Año 1998 CNC HEIDENHAIN TNC 426 PB Superficie de la mesa 6.120 x 1.000 mm Peso Admisible sobre mesa 20.000 Kg. Recorridos (X/Y/Z)) 4.300 mm Avance Rápido Ejes 12.000 mm/min Avance Máximo de Trabajo 5.000 mm/min Cabezal de Giro Automático 2. 5º – 2. 5º Cono Cabezal ISO-50 Potencia Motor Principal 30 kW Gama de Revoluciones 20 – 3.000 r.p.m. Cargador Automático Herramientas INCLUIDO Posiciones en cargador de htas. 40 Equipo de Taladrina con sistema de filtrado de papel INCLUIDO Volante electrónico portátil HEIDENHAIN HR-410 Peso de la Máquina 28.000 Kg.

Fabricante NICOLAS CORREA Modelo L30/58 Año 1999 CNC HEIDENHAIN TNC 430 D Mesa Superficie de la mesa 6.120 x 1.000 mm Peso max permitido sobre mesa 20.000 kg. Recorridos y avances Longitudinal (Eje X) 5.850 mm Transversal (Eje Y) 1.200 mm Vertical (Eje Z) 2.000 mm Avance rápido ejes 12.000 mm/min Avance max. de Trabajo 5.000 mm/min Cabezal Cabezal de giro automático 2. 5º – 2. 5º Cono cabezal ISO-50 Potencia motor principal 30 kW Gama de revoluciones 20 – 3.000 r.p.m. Equipamiento Cargador automático merramientas INCLUIDO POsiciones en almacén de herramientas 60 Volante Portátil HEIDENHAIN HR-410 Evacuador viruta INCLUIDO 4 mesas supletorias INCLUIDO Preparación oara 4º Eje INCLUIDO Refrigeración interna 20 Bar INCLUIDO Equipo de taladrina con sistema de filtrado de papel INCLUIDO Otros Peso de la Máquina 31.000 kg. Potencia total instala ...

Key data: 600 mm, 2000 mm

CNC Lathe Manufacturer: Gildemeister Type CTX 500 Year of manufacture 1999 little used max turning length 2000mm Driven tools every 2nd turret station 315mm three-jaw chuck Schunk Bezel SMW Machine is in TOP condition Geometrically it is also still very good, deviation at 2000mm 0.02mm. Machine is available from week 18. For further information, I am available to you at any time at 01778957069.We also have Whatsapp.

REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Hydraulic clamp couple for chair assembly CAMAM mod. SIPM - CE - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Voltage: 380/50 - Year: 1998

Double sided cutting saw COMEC mod. TD1200 - CE rules - N. 2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - S/N 961228 - Year 1996

Piston Diaphragm Pump Motor power 5.5 kW Flow rate 6 m3/h Delivery pressure 15 bar The pump was only in operation for 3 years to feed a chamber filter press with vegetable oil

General SKU312W1494 LocationBarneveld CEcheck MakeAnlagenbau Stampfer GmbH Main Features Motor2.2 KW Length11466 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information TypeAS-WRB-1000 Mach.No.144.0001 Year of construction2014 Floorspace11,4x1,6 m Total height1,0 m Weight5500 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many  ...

Height=1.84 m, Overall length= 0.92 m, Overall width= 0.88 m, Net weight= 246 kg,

Height=2.28 m, Overall length= 1.82 m, Overall width= 1.47 m, Net weight= 680 kg,

Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Working hours: 1.378 Screw dimension: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4.500 x 1.200 x 2.200 mm Weight: 1.350 kG Line configuration: – 1x Gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering device – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

General SKU334T899 MakeFriedhelm Stechel GmbH LocationBarneveld CEcheck TypeADE120-100 Main Features MaterialStainless steel Motor1.5 KW Inlet diameter748 mm Specified Features - Coating pan MaterialStainless steel 1.4301 (304) Coating pancheck Capacity150 Ltr. Batch sizemax. 130 kg Pan diameter1200 mm Pan depth620 mm In-/Outlet748 mm Motor1,5 kW 230/400 Volt Pan speed19 rpm Information No.D20909 Year of construction2009 Mounted on framecheck Floorspace2,5x1,8 m Total height2,3 mCoating pansFriedhelm StechelCoating pans > Coating pansBrand > Friedhelm Stechel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information.

This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine.

This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine.

This 3-axis MICROCUT V-30 The Challenger was manufactured in 2016. Ideal for precision machining, this vertical machining center ensures reliable performance. Consider the opportunity to buy this MICROCUT V-30 The Challenger vertical machining center. Contact us for more information.

This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information.

This 3-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine.

This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5000 rpm and a milling spindle speed of up to 12000 rpm. The machine includes a B-axis of ±120°, Y-axis travel of ±100 mm, and a 30-fold chain magazine. Its equipped with Siemens 840D sl control for precision. Consider the opportunity to buy this DMG MORI CLX 450 TC + Robo2GO turn-mill centre. Contact us for more information.

This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for sale.Contact us for more information.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This 4-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to buy this CHIRON DZ 18 W vertical machining center. Contact us for more information.

This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information.

This 4-axis CHIRON FZ 15 KWM HS vertical machining center was manufactured in 2012. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 KWM HS machine we have for sale. Contact us for more information.

This 4-axis CHIRON DZ18W was manufactured in 2018. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this CHIRON DZ18W vertical machining centre. Contact us for more information.

This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine.

This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available.

This 3-axis Cincinnati Sabre vertical machining center was manufactured in 1996. If you are looking to get high-quality milling capabilities, consider the Cincinnati Sabre machine we have for sale. Contact us for more information.

This 3-axis FEHLMANN Picomax 82 CNC was manufactured in 1998. It features a Heidenhain TNC 426 control, with travel dimensions of 685/315/540 mm, and a maximum spindle speed of 16,000 rpm. The tool magazine holds 32 tools, SK30, and the machine supports a maximum table load of 250 kg. Consider the opportunity to buy this FEHLMANN Picomax 82 CNC vertical machining centre. Contact us for more information about this machine.

This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine.

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This Coord3 ARES NT was manufactured in 2017. Ideal for precision measurement tasks, this CMM machine offers reliable performance for quality control in various industries. Contact us for more information.

This 3-axis COMEC MD JAM CNC Wood Machining Centre was manufactured in 2024. Consider the opportunity to buy this COMEC MD JAM CNC Wood Machining Centre. Contact us for more information.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.

This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information.

C100 LB Cup Chain for Cans, Bottles/Blisters DESCRIPTION: • Format range folding box W 30-100, H 15-90, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Centrally adjustable cup chain • Product feed for blisters via blister stacking chute (manual packaging) • Monitoring of the height of the packaged goods in the cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding box via Lumat • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2-line • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Rea ...

This 4-axis CHIRON FZ 18 W was manufactured in 1993. It features dual 4th axes and is equipped with a SIEMENS SINUMERIK control system, enhancing its precision and efficiency. The addition of a chip conveyor aids in maintaining a clean work environment. Consider the opportunity to buy this CHIRON FZ 18 W vertical machining center. Contact us for more information about this machine.

This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information.

This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information.

Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm

This 5-axis ESPE LAVA CNC 500 was manufactured in 2008, designed for advanced dental technology. It features a standard disc diameter of 98mm, operates within a temperature range of 18 – 25°C, and maintains a sound level of 65 dB (A). Ideal for businesses aiming to enhance automation and productivity in milling operations. Contact us for more information about this machine.