126,706 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition, can be inspected and tested.
Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg
Height=1.95 m, Overall length= 1.55 m, Overall width= 1.32 m, Net weight= 577 kg,
Height=1.85 m, Overall length= 1.18 m, Overall width= 0.9 m, Net weight= 122 kg,
Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,
Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Optima CMF: Packaging machine Application: For erecting and closing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics to precisely place products and accessories such as spatulas, brochures, or flip-flop sheets. Flexibility: Can also be designed for food and chemical products in other versions of the machine
TBI MVC 1890 CNC vertical machining center was built in 2023 in Poland by TBI Technology Sp. z o.o. The machine has worked very little over its service life. During the last maintenance, the spindle was replaced with a new one worth €10 000. The MVC 1890 CNC machining center on offer is an excellent choice for machining heavy workpieces with a maximum weight of 2500 kg. The state-of-the-art technical solutions used in it guarantee the best precision and efficiency. These include, among others, a reliable, high-speed main spindle. Thanks to its temperature stabilisation (oil cooling), the spindle does not deform thermally and maintains a constant temperature during heavy-duty, high-speed operation. The cutting tools, on the other hand, are continuously cooled during the machining operation, which increases their overall durability. All axes are driven by efficient digital drives w ...
A screw compressor is offered. Maximum pressure 10bar, volume flow approx. 2020l/min (2.02m3/min) with separate compressed air tank, galvanized. Viewing possible by appointment.
Offered are 2 screw compressors with the following features per unit: Power: 15kW, pressure: 10bar, volume flow: 1950l/min (1.95m3/min), speed: 2930rpm, including sound enclosure, 1) year of construction 1989, operating hours: approx. 38100h, 2) year of construction 1986, operating hours: approx. 10600h. Inspection possible by appointment.
THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES & SPARE PARTS ARE AVAILABLE FOR PURCHASE: 1x Canon MC-30 Maintenance Cartridge 1x Toner Canon PFI-1700 MBK 1x Toner Canon PFI-1700 PBK 1x Toner Canon PFI-1700 M 1x Toner Canon PFI-1700 PM 1x Toner Canon PFI-1700 PC 1x Toner Canon PFI-1700 Y 1x Toner Canon PFI-1700 GY
AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...
Aircooled chiller/Heat pump CLIMAVENETA I BX N 025T HASNV 24.7 kW/26.1 kW Cooling capacity: 24.7 kW / 7.02 tons (12/7 — 35°C) Heating capacity: 26.1 kW / 7.42 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi ANB52FFTMT (scroll, inverter) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Wilo Yonos PARA HF 25/10 (inverter), expansion vessel. Dimensions: 1.45x0.57x1.7 m. Weight: 265 kg. Working hours: 0 h. Condition: New
Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020
mit neuem Vakuum Transportband. With new vacumm transportbelt. - Producer Costa - Type S3 CTT 1350 - Year of construction 2003 - Max. part height 3 - 160 mm - 1. Unit - Length belt - Sanding roller ~ 70 Shore - Measure sanding belt 2620 x 1380 mm (1350) mm - 2. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - 3. Unit - Length belt - Electronic sanding beam Costa, 42 Segmente, Raster 32 mm - Sanding belt speed infinitely adjustable - Measure sanding belt 2620 x 1380 mm (1350) mm - Distance follower roller 32 mm - Width, segmented sandingbeam 32 mm - Operating side, right - Aggregate height adjustment - Vacuum transport belt - Total connection power 103 A / 48 kW - Voltage / HZ 400 / 50 - Commodity code 84659300
- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %
- Producer Venjakob - Type VEN SPRAY Compact - Year of construction 2007 - Working width 800mm (1000) mm - Operating side, left - Duo gun drive system - Dry filter system - Exhaust air 7.000 m³/h - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system Siemens HMI Panel, new in 2023 - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin - Supply air box - Switch cabinet built into the machine - Voltage / HZ 400 / 50 - Location, not on stock
- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %
- Producer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of construction 2007 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Max. part height 70 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp max. 120 W/cm - Electic capacity lamp infinitely variable - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 86 A / 36,4 kW - Voltage fluctuation max. +/- 5 %
- Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1.300 mm - Working height 870 + - 20 mm - Max. part height ~ 70 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor 1 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 95 mm - Feed speed adjustable 5 - 25 m/min - Length 1.500 mm + 500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 12,56 kW - Voltage fluctuation max. +/- 5 %
- Producer Cefla/Sorbini - Type Ecolight - Year of construction 2000 - Working width 1.300 mm (1.445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 115 mm - Width 2.300 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 38 kW - Voltage fluctuation max. +/- 5 %
- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2005 - Working width 1.300 mm - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %
- Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %
- Producer Cefa/Sorbini - Type SMARTCOATER MF - Year of construction 2007 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height 880 mm - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for lacquer 50 - 60 Shore - roller diameter 250 mm - Qick changes system for roller - Metering roller 173 mm - Double diaphragm pump Wagner ZIP 80, 1 Stk. - Length 900 mm - Width 3.000 mm - Height 1.500 mm - Loading gauge im meter 1 x 3 x 1,5 m - Mobile, with flange of wheel - Feed speed ~ 4 - 20 m/min - Total connection power 3,4 kW - Weight 1.520 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock ab kW 34-2019 - Voltage fluctuation max. +/- 5 %
- Producer Cefla / Sorbini - Type T / 20-SP-1 - Year of construction 1997 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 174 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1640 mm - Width 2590 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 4,5 kW - Weight 2.000 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, not on stock
- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2007 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, left - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock
- Producer Cefla / Sorbini - Type SMARTCOATER SP-1 - Year of construction 2003 - Working width 1300 mm - Working height 880 - 940 mm - Part height ~ 3 - 80 mm - Operating side, right - Roller for putty ~250 mm - Metering roller hard chormed 173 mm - Smoothing roller hard chromed 245 mm - Reverse drive - Belt transport system - Belt control system - Length ~ 1.640 mm - Width ~ 2980 mm - Height ~ 1700 mm - Feed speed 6 - 24 m/min - Total connection power 3,5 kW - Weight 2.500 kg - With switch cabinet - Voltage / HZ 400 / 50 - ATEX - Location, on stock
A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.
CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...
Vertical cartoner, intermittend, semi-automatic Formate area folding box depth 15 - 70, width 20 - 115, height 50 - 190 mm, box remove by sucker Output max. 15-70 boxes/min, the maximum speed depends on the format and product Embossing device Vacuum pump Complete housing with segment doors Mobile with removable chassis Electric cabinet mobile PLC Telemecanique TSX 17 Electr. connection 400V/50Hz This machine is offered at a special price and sold as-is without technical inspection.
Uhlmann C 130 horizontal cartoning machine ampoules / blister machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump / Venturi
Manufacturer: Chiron Model: DZ 12K W Year of Manufacture: 2010 - High-speed CNC machining system by Chiron - Equipped with 4th axis and integrated rotary table for high productivity - Includes Knoll chip conveyor - Includes water treatment plant Find more here - / Contact us at -
General SKU345S1071 MakeUSF Seitz Filtertechniek GmbH LocationBarneveld TypeSEITZ-VELAcart Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles5 Liquid outletDN50 Max. temperature85 °C Top connectionsDN25 Capacity34 Ltr. MaterialStainless steel 1.4571 (316Ti) Information No.541 Year of construction2000 Floor space0,4x0,3 m Total height1,5 m Extra SpecificationsInlet: DN50 Outlet: DN50 Max. working pressure: 10 bar Test pressure: 14 bar Max. temp: 85/134 °C Content: 34 Ltr. WITHOUT CANDLES Candle filtersUSF Seitz FiltertechniekFilters > Candle filtersBrand > USF Seitz Filtertechniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...
CINCINNATI MILACRON DART 750 CNC vertical machining center was built in 1999 in the UK by Cincinnati Milacron U.K. Limited. The machine, designed for machining workpieces with a maximum weight of 455 kg, is distinguished by its outstanding precision, efficiency and reliability. The machining process is performed on a large work table with a length of 950 mm and a width of 520 mm, by means of a high-speed spindle and cutting tools taken from a 21-position magazine. High process stability, even during the most intensive challenges, is in turn ensured by an extremely rigid design made of top-quality steel. All this is completed by a CNC controller with dialogue programming. The CINCINNATI MILACRON DART 750 CNC machining center weighs approximately 3500 kg. Technical specifications of the CINCINNATI MILACRON DART 750 CNC milling machine - CNC controller: ACRAMATIC 2100 - number of axes: ...
General SKU345S1073 MakeUSF Seitz Filtertechniek GmbH LocationBarneveld TypeSEITZ-VELAcart Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles5 Top connectionsDN25 Capacity34 Ltr. MaterialStainless steel Information No.542 Year of construction2000 Mounted on legscheck Floorspace0,4x0,3 m Total height1,5 m Extra SpecificationsInlet: DN50 Outlet: DN50 Max. working pressure: 10 bar Test pressure: 14 bar Max. temp: 85/134 °C Content: 34 Ltr. WITHOUT CANDLES Candle filtersUSF Seitz FiltertechniekFilters > Candle filtersBrand > USF Seitz Filtertechniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pleas ...
Leather Spilitting Machine. Camoga 520L+AS. New in 2016, light use since 2023. 520mm working width.
Amut Vertical centrifugal dryer under efurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content, Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon can be quoted on request, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h with film ,more with rigid plastics, depending on material and water %, conditions: refurbished, type: Vertical
Key data: 2000 KW, 2500 kVA, 10500 V
2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number
CHAIN NEXTRACTION BELT, 4.370 mm long, 5,5 kW motor, Spaggiari gearbox With central chain transport and paddles Flat type on supports Stainless steel structure, n.4 F218 bearings Construction year 2013 510 mm.outer width 410 mm.inside width, installed power - used power in work: about 60-65% : 5,5 kW, working width: 410 mm., conditions: checked
UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.
FOR SALE 3 CHILLER CARRIER YEAR 2 UNITS 2004 AND 2002 PRICE LOADED DEPARTURE FRANCE 7500€ FOR 3 UNITS
Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction
Key data: 650 mm, 600 mm, 500 mm
For sale is a Hermle 5-axis machining centre type C30 U (5 simultaneous axes). Equipped with the Heidenhain i TNC 530 controller. The travels of the X, Y and Z axes are 650 x 600 x 500 mm. The table diameter is 280 mm. The machine includes various clamping pallets that can be attached to the table. The maximum speed range is between 20 and 18,000 rpm. The spindle holder is HSK-63. In addition to the standard 32-cavity tool magazine, the machine has an expansion to 157 tool positions, bringing the total number of tool positions to 197. Furthermore, the machine is equipped with a Knoll high-pressure system with a maximum pressure of 40 bar including a fine filter system. A chip conveyor with rear discharge is also available. At the front of the machine is a robotic loading system with a significant number of pallet spaces (depending on the pallet size). This system is connected to the mach ...
CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy
Manufacturer: Cutting Trading Model: LC1 Automatic Unwinding Machine with Cross-Cutting Function Year of Manufacture: 2021 Technical Specifications: Maximum Roll Load Capacity: 800 kg Maximum Roll Diameter: 600 mm Maximum Feed Speed: 400 mm/s Maximum Cross-Cutting Speed: 400 mm/s Usable Width: 2200 mm Positioning Accuracy: 0.5 Find more here - / Contact us at -
The Corosys CCS DN50 is a carbonation and process plant used in beverage manufacturing plants. It injects CO₂ into fruit juices, lemonade and other carbonated beverages in a controlled manner and ensures the desired degree of carbonation. In addition, CIP (cleaning), steam and cooling connections enable integrated hygienic production and sterilization processes, allowing the production line to operate both efficiently and hygienically.
General SKU350W923 LocationBarneveld MakeStephan TypeUMB40 Main Features MaterialStainless steel Volume40 Ltr. Motor5.5 KW Specified Features - Cutter MaterialStainless steel (Sandvik 1200SA) Cuttercheck Capacity40 l. Diameter500 mm Depth250 mm Knife diameter300 mm Number of knife blades2 Outlet100 mm Can be tiltedcheck Motor5,5 kW, 380 volt, 2870/1420 rpm Speed1420/2870 rpm Information No.25706A Year of construction1976 Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,70 m Total height1,10 m Extra SpecificationsThe vessel is made of stainless steel. : : The blades and lid are made of aluminum. : : CuttersStephanMills > CuttersBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...
Used, in very good condition Packaging type : Tetra Prisma Aseptic Package volume : 1000,00 ml Shape of packaging : Squareline
The C400 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers Planing width 400 mm Dressing table length 1800 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Engine V400/50 3 kw / hp Amplified motor possible 4 kw/ 5.5 hp (not necessary) Weight approx. 800 kg Machine with Hammer Austria
The C300 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers The machine can be either 3 or 4 hp / 2.2 kw 3 kw S6 also 3 kw or 4 kw. Planing width 300 mm Dressing table length 1500 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Weight approx. 600 kg Machine with Hammer Austria
maximum number of results exceeded
please refine your search
