126,706 used machines on RESALE, but how to find them? Machine Search
General SKU397X1090 LocationBarneveld MakeLauda TypeSUK 250W Mach.No.B 13008 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity9 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity9 kW With coolingcheck (Water) Capacity13 kW at +20 °C Temperature-25/80 °C With pumpcheck Capacity2 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck Total height1,92 m CEcheck Floorspace1,63 x 0,78 m Weight800 kg Extra Specifications Connections (outflow/return): :Flanges DN25: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Sterling SIHI Filling capacity: approx. 60 L Refrigerant: R 404 A Filling volume: 6 kg ...
General SKU397X1086 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.B 13009 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity9 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity9 kW With coolingcheck (Water) Capacity13 kW at +20 °C Temperature-25/120 °C Tank capacity60 Ltr. With pumpcheck Capacity2 m³/h With controlcheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height1,92 m CEcheck Floorspace0,78 x 1,63 m Weight850 kg Extra Specifications Compressor: Semi-hermetic reciprocating compressor Delivering pump: Sterling SIHI Filling capacity: approx. 60 L Refrigerant: R 404 A Refrigerant filling volume: 6 kg (approx. 5–7 L) Connections (outflow/return) ...
General SKU397X1088 LocationBarneveld MakeLauda TypeTR400HKK Mach.No.B 16329 Pressure Working pressure18 Bar Main Features Heating (medium)Steam Capacity6 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4301 (304) Temperating machinecheck Thermal oil heatercheck Water heatercheck Heating medium:Steam / Water Heating capacity6 kW With coolingcheck (Cooling and Deep Cooling) Temperature-30/200 °C Tank capacity120 Ltr. With pumpcheck Capacity10 m³/h Motor5.5 kW With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck Total height2,52 m CEcheck Floorspace2,27 x 0,98 m Weight1540 kg Extra SpecificationsHeating : Type of primary energy: Steam Transfer area (heat exchanger): 4 m² Connections: DN25 / DN50 : Cooling (K) Type of primary energy: Cooling wat ...
General SKU397X1089 LocationBarneveld MakeLauda TypeSUK 400 W Mach.No.B 15623 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity20 KW Temp.30 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck (chiller) Heating medium:Water/Glycol (1:1) Heating capacity52 kW With coolingcheck Capacity20 kW Temperature-30/30 °C Tank capacity± 75 Ltr. With pumpcheck Capacity3 m³/h With temperature controllercheck Information Year of construction2003 Mounted on framecheck Total height2,5 m CEcheck Floorspace0,98 x 2,29 m Weight1210 kg Extra SpecificationsCompressor : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :Semi-hermetic reciprocating compressorOperating temperature : : : : : : : : : : : : : : : : : : : : ...
General SKU397X1085 LocationBarneveld MakeLauda TypeTR 150 K Mach.No.HKS10 119 Pressure Working pressure6 Bar Main Features Heating (medium)Electric Capacity1.5 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Temperating machinecheck Water heatercheck Heating medium:Water/Glykol (60:40) Heating capacity1.5 kW With coolingcheck (Water/Glykol (60:40)) Temperature-20/80 °C Tank capacity80 Ltr. With pumpcheck Capacity± 10–12 m³/h Motor1,1 kW With controlcheck (as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height1,05 m CEcheck Floorspace0,69 x 1,32 m Weight450 kg Extra SpecificationsHeat Transfer Circuit Design temperature: –20 °C to +80 °C Design pressure: –1 bar to +6 bar(g) Delivery pump: WILO Type: BL32/210 ...
General SKU397X1104 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.HSK07001 Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controllercheck (PID controller SR 500 - as is) Information Year of construction2007 Mounted on framecheck Total height2,24 m CEcheck Floorspace1,2 x 1,9 m Weight1100 kg Extra Specifications Connections (outflow/return): :DN 32 Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refriger ...
General SKU397X1129 LocationBarneveld MakeLauda TypeSUK 350 W Mach.No.B14 730 Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With coolingcheck (Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controllercheck (PID controller - as is) Information Year of construction2003 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace1,14 x 1,5 m Weight950 kg Extra Specifications Connections (outflow/return): :Flanges DN50: PN16: DIN 2633 Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos C ...
General SKU397X1130 LocationBarneveld MakeGWK Typeweco 15 WZTX (weco e z 8 w m10p7 pt 6v aa X) Mach.No.290201-01-01 Pressure Working pressure12.2 Bar Main Features Capacity8 KW Temp.7 °C Specified Features - Temperature control unit Temperating machinecheck (chiller) Water heatercheck Electric capacity.. kW, 230/400 volt With coolingcheck Capacity8 kW Temperature7 °C Information Year of construction2011 Mounted on framecheck With switchgearcheck Total height1,8 m CEcheck Floorspace1,3 x 1 m Weight450 kg Extra Specifications Cooling medium: R404A Maximum refrigerant fill weight: 1.42 kg Compressor volumetric flow: 22.1 m³/h Temperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...
General SKU397X1165 LocationBarneveld MakeLauda TypeSUK 250 W Mach.No.HKS10 047 Pressure Working pressure shell10 Bar Working pressure tubes16 Bar Main Features Heating (medium)Oil Capacity18 KW Temp.200 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4306 (304L) Temperating machinecheck Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity18 kW Electric capacity18 kW With coolingcheck Capacity10 kW at –20 °C Temperature-30/175 °C Tank capacity50 Ltr. With pumpcheck Capacitymax. 15 m³/h Motor5,5 kW With temperature controllercheck (PID controller (LAUDA SR 600) as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height2 m CEcheck Floorspace0,78 x 2 m Weight1300 kg Extra SpecificationsGeneral Design Power supply: 400 V / 3 Ph / PE / 50 Hz Power consumpti ...
General SKU389X986 LocationBarneveld MakeDickow Pumpen TypeNCL s 200/400 Mach.No.24221005 Pressure Working pressure4.5 Bar Main Features MaterialCasted steel Volume500000 Ltr. Motor90 KW Specified Features - Centrifugal Pump Pumpcheck Capacity500 m3/h With motor90 kW (400 V, 1485 rpm) Inlet250 mm Outlet195 mm Centrifugal Pumps MaterialSilicon steel 1.5023 Information Year of construction2024 Mounted on framecheck Total height1,05 m CEcheck Floorspace0,85 x 2,2 m Weight1500 kgCentrifugal PumpsDickow Pumpen GmbHPumps > Centrifugal PumpsBrand > Dickow Pumpen GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU211N1317 LocationBarneveld MakeHTT TypeCPS 05-2-28-1-2-S Year of construction1998 Main Features Heating (medium)Oil Capacity28 KW Temp.280 °C Specified Features - Temperature control unit Thermal oil heatercheck Heating medium:Marlotherm LH Heating capacity28 kW With coolingcheck Capacity43 kW Temperature280°C With pumpcheck Capacity7,2 m3/hr With temperature controllercheck Information With switchcheck With switchgearcheck Floorspace1,2 x 0,4 m CEcheck Total height1,2 m Weight250 kgTemperature control unitsHTTHeat exchangers > Temperature control unitsBrand > HTT What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
KRUPS Modular Conveyor System – Unmatched Efficiency for Industrial Automation The KRUPS Modular Conveyor System, part of the KRUPS LOGO!MAT L series, is expertly crafted for industrial automation, seamlessly connecting workstations with standardized pallets. This robust friction roller conveyor boasts a nominal width of 514 mm, specifically engineered for loads up to 250 kg per pallet, optimizing both precision and efficiency in handling heavy components. With integrated automation modules, this system offers lift units, rotation modules, diverters, and stop positions for advanced routing and orientation. Designed for straightforward control integration, it includes mounts for RFID and photoelectric sensors, ensuring precise tracking and coordination with standard PLC or fieldbus I/O. Made in Germany, the systems high-quality components and modular design offer superior longevity and ...
Hyfra Cooling Water Recirculating Cooler CWK70 Power range: 6.4 kW Year of construction 2009 Refrigerant R410A Mains voltage 400V / 16 A / 3Ph Hose connection 3/4" ID19 VAT is shown EXW, pickup available without warranty
Spiral cooler dim.260 x 260 x320 cm , 2 spiral belt , width of the belt 60 cm
Overhauled, with hydraulic-unit, electrical motor and voith turbo coupling. Without frame
WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt.
Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg
General SKU397X1103 LocationBarneveld MakeLauda TypeSUK 400 W Mach.No.HSK04075 Pressure Working pressure4 Bar Main Features Heating (medium)Oil Capacity30 KW Temp.160 °C Specified Features - Temperature control unit MaterialCopper Thermal oil heatercheck Heating medium:Therminol D12 Heating capacity30 kW Electric capacity88 kW 400 V With coolingcheck Capacity20 kW Temperature-20/160 °C With pumpcheck Capacity5 m³/h With temperature controllercheck Information Year of construction2004 Mounted on framecheck With switchcheck CEcheck Floorspace0,98 x 1,9 m Total height2,3 m Weight1750 kg Extra SpecificationsCompressor: Semi-hermetic reciprocating compressor Operating temperature: -20°C … +160°C Temperature control: PID controller Temperature measuring element: Pt 100 Control deviation: less than 1 K Heat carrier: Therminol D12 Delivering pump: Sterling ...
General SKU428W1355 LocationBarneveld MakeGFKK TypeTKK Year of construction1998 Pressure Working pressure24 Bar Main Features Heating (medium)Ammonia Capacity22 KW Temp.160 °C Specified Features - Temperature control unit MaterialMild steel, Stainless steel Temperating machinecheck With coolingR507 / R23 Temperature-70°C/+160°C Tank capacity1,5 m3 With pumpcheck Information Mounted on framecheck With switchgearcheck Total height2,50 m CEcheck Floorspace6,0x2,5 m Extra SpecificationsWith 4x Bitzer cool compressors, type 6G-30.2 Y, volume 126,8 m3/h, 19/25 bar, : Alfa Laval plate heatexchanger, type TM10-BFM, 10 bar, volume 56,7 l., : Schmidt plate heatexchanger, type ST12-PE0085, volume 12 l., 25 bar, : 2x Textoris horizontal stainless steel tank, volume 1007 l., 1x Textoris horizontal vessel, volume 1500 l., pressure 2 bar, : 3-doors control/power cabinet ...
General SKU394U1134 LocationBarneveld MakeLauda TypeTR 400 HKT/KT-EX Mach.No.HKS08032 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) Information Year of construction2008 Total height2,5 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
General SKU394U1129 LocationBarneveld MakeLauda TypeTR400 HHKT-EX Mach.No.HKS08020 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity300 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heatercheck Therminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacityunknown Motor5,5 kW, 400/690 Volt, 2880 rpm (EX) Information Year of construction2008 CEcheck Floorspace2,15x1,0 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...
turning diameter: 890 mm turning length: 3000 mm turning diameter over slide rest: 550 mm control: Fagor 8055i ATC Revolver: 8 tail stock: MK 6 turning dia. in gap: 1220 mm length of gap: 450 mm spindle passage: 106 mm turning speeds: 15-1480 U/min 3-jaw chuck: 400 mm steady: 300 mm chip conveyor: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was creat ...
turning diameter: 475 mm turning length: 1500 mm control: Fagor 8055T Revolver: 8 turning diameter over slide: 240 mm turning dia. in gap: 710 mm length of gap: 350 mm spindle passage: 51 mm turning speeds: 100-4500 U/min Power: 7/11 KW 3-jaw chuck: 250 mm steady: 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...
Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg
GAS TURBINE CENTRAX PACKAGE OR ONLY CORE YEAR 1990 HOURS 40 000 PRICE LOADED IN FRANCE
General SKU299T699 MakeEllerwerk (Rebuild by Heinkel) Type937H No.80.065/09.81.003 Year of construction1981/ ( rebuild 2010) LocationBarneveld Main Features MaterialHastelloy Motor22 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity210 Ltr. Basket sizes1050x500 mm Wall thickness12 mm Max. loading weight230 kg Motor45.0 kW, 400/690 Volt, 1480 rpm.( EX) Max. basket speed1400 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck Motor0,75 kW, 230/400 Volt, 1430 rpm (EX) InletDN 80, DN32 Solids outletDN 200 Liquid outletDN 150 MaterialStainless steel 2.4602 (Hastelloy C-22), Stainless steel 2.4610 (Hastelloy C-22) Information Mounted on foundation platecheck Floorspace3,85x1,9 m Total height1,8 m Weight± 10000 kg CEcheck ATEX compatiblecheck Extra SpecificationsThis Ellerwerk was completely overhauled by Heinkel in ...
Used can seamer made by KZ. Can diameter: fi 99. 2 pieces available.
Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New) ...
Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning
Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning
Brevetti C15 Double-Saw Miter Saw Machine designed for 45° cutting Use for cutting: decorative frames, furniture door frames, glazing beads Saw size max/min 275/250mm Saw speed 3250r.p.m Motor power 2×1.5kw Pneumatic material pressure Pneumatic feed of the cutting deck 2x 100mm extraction port
Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right
EDM machine Type: Robocut Alpha C600ia Manufacturer: Fanuc Year: 2014 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 300 mm Including clamping, 3D vice and filters Deionization 50L Machine in good condition, fully functional, under power Find more here - / Contact us at -
Used Carrier 30 HXC 265 water cooled chiller on R134A. Complete with 2x Carrier 06NW2300S5EA-A00 & 1x Carrier 06NW1250S7EA-A00 semi-hermetic screw compressors, shell and tube condenser, shell and tube evaporator, 2 oil pumps, control cabinet with a display. Specifications: Brand: Carrier Type: 30 HXC 265 Product type: Water cooled chiller Capacity kW: 911,3 Capacity Tons: 259,1 Refrigerant: R134A Weight in kg: 4492 Sizes: 4250x900x2060 mm (LxWxH) Compressors: 2 Carrier 06NW2300S5EA & 1 Carrier 06NW1250S7EA-A00 Display: Carrier display
Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.
An Inkjet printer Citronix is available. Image height: 12mm, image resolution vertical/horizontal: 50DPI/100DPI, number of print lines: 4, printing performance: 304m/min, spray distance: 25mm. Documentation available.
The brand manufacturer COBRA-SOR ceased its activities in 2019 We have products for the following brands: VW, Mercedes, Ford, Nissan, Madzda, Mitsubishi, Opel, Renault, Fiat, Skoda, Toyota, Hyundai, Chevrolet, Citroen, Honda, Isuzu, Jeep, Kia, Audi, Peugeot, Seat Under abc s : / / thor-automotive . en/ you will find all the articles that our sister company has posted. We are currently making another precise, up-to-date inventory. List price for all together was € 1.3+ million net. The export price at that time was about € 650,000 We imagine € 250,000 FCA 21614 Buxtehude (thus approx. 19% of the retail list price) We would charge an additional €33,000 net for the 269 shelf crates/foldable tire pallets in which the goods are currently stored. You can receive a ready-to-use merchandise management system based on "Odoo V16 Enterprise" from us free of charge. All p ...
A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible.
Provisur Coater TST Coating machine Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock
Can Filling Line 1500 cph with CASK mACS filler and ELF labeller Complete can filling line from the can shaker to rotating buffer table all delivered by Canadian CASK in year 2022 suitable for beer, kombucha, cider, tee and other drinks. Can shaker is semiautomatic and requires forklift for lifting can pallet after very layer of cans. Once the layer is on the shaker, cans will flow down with gravity to ricer and finally to inlet screw of CASK mACS can filling station. This CASK mACS Micro Canning System features a three-head filling station. Its inline fill-head control technology integrates fill-level sensors with proprietary foam-control valves, enabling precise and independent control of each fill head. The system includes CO₂ pre-purge using a piston-style purge mechanism that fully evacuates oxygen from the can prior to filling, helping ensure product quality and improved ...
Cool Compact Pizza Cooling Table 2-door pizza counter with GN attachment mobile on wheels Granite slab +2°C +12°C Metrics WxDxH 107 x 70 x 113 cm Beleg stations - new and used - can be found in our shop! International shipping costs on request!
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
overhauled: 2025 Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1760mm Axis Z ... 1000mm Plunger Cut... 180x220mm powered tools ... 15 Number of positions in the tool changer ... 15 Axis C ... 360° cooling ... 20bar Main engine power ... 60kW Speed of the clamping table surface ... 2-200 rpm Speed of driven tools ... 8-3300 rpm Motor power of driven tools ... 19.5kW Machine weight ... 27200kg L x W x H ... 5700x7000x5900mm The machine is completely overhauled. More info on request. With one-year warranty.
Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives
ALMIG Combi 15-10 rotary screw air compressor YOM 2012. Never used. Motor speed 3000 rpm Motor power 15 kW Volume flow m3/min- 1.84 Volume m3/hour- 110 Max. pressure 10 Bar. Air Receiver Capacity 500L
Putzmeister sewage sludge conveyor system with a maximum delivery rate of 6-7 t per hour and a pressure of 100bar (including pumping) Is no longer in the pit in the pictures, has been cleaned and stored. Fully functional and hardly used Design data (organic) Medium Conveying medium: Sewage sludge Material definition (Fluid I / Fluid II) (1): Fluid 2 Dry matter content: 25 to 30% Type of dewatering: Centrifuge Precipitant (4): Polymer Maximum particle size: 5 mm Type / size of foreign bodies (6): Wood, glass, stones / 80 x 80 x 80 mm Flowability: Like moist soil Temperature of the medium: +5 to +20 °C Density of the medium: 0.9 to 1.1 t/m³ pH value: 6 to 8 Gas formation: None Loss on ignition (5): < 40% Rheological behaviour: Thixotropic Aggressive: No Abrasive: Yes Corrosive: No Sticky: Yes Further data: Installation location: Outside Ambient temperature: -5 to ...
Turning lenght 450 mm Turning diameter 210 mm With C axis Spindle bore 52 mm Number of tools 12 Spindle speed 5000 rpm Controller Heidenhain Plus it
CNC vertical machining center Type: FVC 120 CNC Manufacturer: TYC Control: Heidenhain X: 2200 mm Y: 1700 mm Z: 900 mm Max spindle speed: 24000 rpm Tool clamping: HSK-A63 Tool magazine: 32 positions Maximum tool length: 300 mm Maximum tool diameter: 150 mm Maximum tool weight: 6 kg Dimensions: 8900 x 7350 x 5100 mm Machine weight: 30000 kg In good condition, under power Find more here - / Contact us at -
Aircooled chiller CARRIER 30XB 0900 0041 890 kW Cooling capacity: 890 kW / 253.1 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Recuperation. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06TUA483SW1E (screw) Type of refrigerant: R134а Number of fans: 14 pcs. (Frequency inverter) Dimensions: 7.2x2.26x2.3 m Weight: 7321 kg Working hours: 6088/6061 h. Condition: Good
maximum number of results exceeded
please refine your search
