126,608 used machines on RESALE, but how to find them? Machine Search
serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1160 mm table width: 710 mm daylight: 650 mm Control: WENZEL ME 5007 total power requirement: kW weight of the machine ca.: 800 kg dimensions of the machine ca.: m 3-D-coordinate measuring machine with METROLOG II-Software The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using ...
bore capacity in steel (diameter): 10 mm throat: 0 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 275 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: square: 80 mm capacity 90 degrees: flat: 100x70 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 70 mm capacity 60 degrees: flat: 80x60 mm total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5 x0,85 x0,95 m The versatile professional metal circular saw. Convincing in performance and price. • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Cone safety clutch made of hardened steel to protect the saw blades. • 2 speeds 33 + 66 rpm • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Closed cast, m ...
weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 5 t workpiece diameter: 100-2500 mm gear diameter: 250 mm gear width: 140 mm total power requirement: 0,8 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2,0 x 1,4 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 20 t workpiece diameter: 150 - 3800 mm drum diameter: 350 x 150 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 t workpiece diameter: 100 - 3200 mm drum diameter: 300 x 120 mm feed: 100 - 1000 mm/min total power requirement: 2 x 0,55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 250 mm capacity 90 degrees: round: 85 mm capacity 90 degrees: square: 75 mm capacity 90 degrees: flat: 100x65 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: square: 75 mm capacity 60 degrees: flat: 90x60 mm total power requirement: 0,8 kW weight of the machine ca.: 0,04 t SPECIAL PRICE! The assembly saw with extensive standard equipment and a large cutting area · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Automatic cooling directly on the saw blade · 24 V safety switch in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool Options: Saw blade 57 EUR Machine base type 20505 192,-EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 t workpiece diameter: 150 - 4500 mm drum diameter: 400 x 160 mm feed: 100 - 1000 mm/min total power requirement: 2 x 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 17 - 70 U/min total power requirement: 3,0 kW weight of the machine ca.: t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m SPECIAL PRICE! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer ...
saw blade diameter: 250 mm capacity 90 degrees: round: 80 mm capacity 90 degrees: square: 70 mm capacity 90 degrees: flat: 95x60 mm capacity 45 degrees: round: 70 mm capacity 45 degrees: square: 60 mm capacity 60 degrees: flat: 65x60 mm total power requirement: 1,0 kW weight of the machine ca.: 0,075 t dimensions of the machine ca.: 0,3 x0,8 x0,75 m SPECIAL PRICE! The ideal metal circular saw for workshop and assembly • For miter cuts left up to 45° • For sawing steel, stainless steel and, to a limited extent, aluminum profiles • Spindle vice with double clamping arm for low-burr cuts • Optionally with 230 V or 400 V motor • Automatic cooling directly on the saw blade • Double bearing for saw head • 24 V safety switch in the handle with restart lock • Length stop, assembly tool • Subframe (option) additional price 172,-EUR ATTENTION: Price is without saw blade! (saw bl ...
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
VERTICAL COOKER WITH PNEUMATIC OPENING, IN WATER OR BRINE, MECALSA TYPE: MC CDA-2 Technical description: Material: Stainless steel Aisi-304 Heating: Steam/hot water in internal coil Opening: Pneumatic Power supply: 220 V ? 50 Hz Capacity: 2 baskets Internal diameter: ? 1227 mm Outer diameter: ? 1284 mm Height: 1300 mm
We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never used productively., - Control Options, - options package, - high-pressure coolant flow, - accessory package
Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without com ...
A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible.
A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.
A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats ...
A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible.
Temperature range: 30°C-300°C, water pressure: 150kPa-600kPa, power: 31.5kW, cooking programs: 350, fan speeds: 5, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1200mm. Documentation available.
Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.
A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.
There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22 ...
Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.
An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.
Three Remeza compressors and a Haro feed pump are available. 1) Remeza Remcomp SB4/C-100, year of manufacture: 2011, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 2) Remeza Remcomp SB4/C-200, year of manufacture: 2012, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 3) Remeza BK7, year of manufacture: 2008, type: screw compressor, output: 700l/min, max. operating pressure: 10bar, power: 5.5kW. 4) Haro GF feed pump, year of manufacture: 2020.
An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible.
Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.
A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.
A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.
Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible.
Load capacity: 500kg, reach: 2750mm, swivel range: 360°, foundation column weight: approx. 3000kg, tare weight: approx. 3350kg. Documentation available. On-site inspection is possible.
turning diameter: 380 mm turning length: 700 mm control: SIEMENS spindle turning speed - stepless: 2500 U/min tailstock quill taper MT: 4 weight: 1.5 t dimensions of the machine ca.: 2000x1400x1820 mmxmmxmm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm
Slicer with scale / slicer Bizerba Type: VSP Specifications: 220-240 Volt / 50/60 Hz / 1A Year of Make: 2022 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba sander with normal carriage for sausage or cheese with integrated checkweigher up to 3 kg Luminous flux / 230V Schuko plug Function checked, machine ready for immediate use! Original price approx.: EUR 8.650,- Condition, see original pictures! If you have any questions, email or call.
• Height of centers 750 mm • Distance between centers 5000 mm • Diameter on the bench 1500 mm • Diameter on the carriage 1050 mm • Main engine power 75 Hp • Baruffaldi BA 300 4-position automatic turret • CNC ECS 2400 • Hydraulic chuck • Max. permissible weight between the tips without steady rests kg. 15000 • Max. permissible weight on the platform, cantilevered, with centre of gravity at 300 mm: kg. 3800
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW
Offer 22252 Specifications: - Cutting range at 90° round + square 330 mm - flat 600 x 320 mm - Mitre adjustable left / right 30 / 45 ° - Schnittb. at 45° Re + Li around 320 mm - flat 350 x 320 mm - Material support height approx. 920 mm - Saw blade dimensions 4440 x 34 x 1.1 mm - Cutting speed infinitely variable 10 to 100 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise - Coolant device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 1400 x H 1400 x D 2400 mm - Weight approx. 1000 kg
A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.
A fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) including automatic product mixing of offline products is available. Example of mixed formats: 6-3-3/4-4-4/5-4-3/8-2-2/10-2, max. packaging capacity: 280 jars/min, max. carton erecting capacity: 2.3 cartons/min, mold changeover time: approx. 15min, overall system dimensions X/Y: approx. 16600mm/5800mm, weight of carton erector/packaging unit: approx. 1200kg/7500kg, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Expected to be available from mid/end of July 2025.
Key data: 450 mm, 320 mm, 162 mm
For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!
Year of construction 2019 Control Celos with Siemens 840D sl Operate including 21.5 ERGOline Control Travel X-axis: 490 mm Y-axis: 250 mm Z-axis: 1,300 mm B-axis: +120° to -120° Max. turning diameter 500 mm Max. turning length 1,200 mm Main spindle ISM102 Drive power: 37/28 kW Max. torque: 700/800 Nm Max. spindle speed: 4,000 rpm Max. bar passage: 104 mm Sub-spindle ISM52 Drive power: 14.5 kW Max. spindle speed: 6,000 rpm Milling spindle Drive power: 22 kW Max. spindle speed 12,000 rpm HSK-63A DIN69893 Tool magazine 80 tool positions Other equipment Interface for robots Glass scales in X, Y and Z axes MP 1.0 – Machine Protection Control Tool probes Workpiece probe, BLUM TC60 Sorting the tools in the magazine Technology cycle for the application of an alternating speed for vibration-critical voltages Chuck rinsing device on the ...
maximum number of results exceeded
please refine your search
