caterpillar 3516 c used for sale

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0815LDS Load capacity: 450 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.77 m x 1.50 m Height: 2.46 m Railing folded down Height: 1.87 m Weight approx.: 3253 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 30 % Drive via battery 8x6V / 240 Ah Integrated charger 48V/40 A Support with automatic level compensation. Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0710LDS Load capacity: 230Kg Lifting capacity platform extension: 113 kg Platform dimensions: 1.86 x 0.81 m Extendable platform + 0.90 m Transport Dimensions 2.45 m x 1.01 m Height: 2.18 m Railing folded down Height: 1.83 m Weight approx.: 1940 Kg Working height: 8.7 m Platform height: 6.7 m Climbing ability up to: 25 % Drive via battery 24V / 260 Ah Integrated charger 24 V/ 36 A Support with automatic level compensation. non-marking chains German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA wil ...

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0408DC Load capacity: 200 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.23 x 0.65 m Extendable platform + 0.60 m Transport Dimensions 1.45 m x 0.78 m Height: 2.08 m Railing folded down Height: 1.70 m Weight approx.: 900 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25% Drive via battery 4x12V / 120 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tra ...

Vertical machining center, CHIRON FZ08KW, 2 pallet, 15000 RPM, HSK40A, CNC Fanuc 21iM, The machine is visible in our warehouse in Gussago BS. M i m u Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Cool condensing unit Model: M5P CSGLE ZF 40-SB-P Compressor type: ZF40K4E-TWD-551 Cooling capacity for R404A: 22.1 kW at -10°C/40°C, 11.9 kW at -25°C/40°C, 9.5 kW at -30°C/40°C External dimensions: 1460 x 850 x 1410 mm Number of fans: 2 x 500 mm Stock: 1 piece Stock number: AG 177 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Key data: 75 , 13 , 15

Screw compressor, 500 V drive, was serviced by Atlas Copco in 2020 and has been out of service since then. Accessories (absorption dryer, refrigeration dryer, oil/condensate separator) available for an extra charge.

Key data: 73 , 3

Screw compressor, 500 V drive, serviced

Oil/Condensate Separator

Manufacturer: Chiron Model: FZ15 S High Speed Year of Manufacture: 2007 Operating Hours: 48,000 h Find more here - / Contact us at -

CNC teach-in lathe, CMT URSUS 250 PLUS, 250 center height, 1500 between centers, Under power in our warehouse in Gussago BS - Italy

Inv. Num. : 8196 Type: SRM 125 CNC Producer: ŠKODA Created: 1974, GO 2010 Parameters: Control system: Heidenhain Manual Plus 4110 Maximum turning length: 3000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Length: 8000 mm Width: 3000 mm Height: 2100 mm Weight: 16350 t Equipment: Fixed bezel Technical documentation Front panel Cutter head Universal chuck

Clipping machine Manufacturer: Poly Clip Model: PDC 600 Semi-automatic double clipper Width: 1.000 – 1.100 mm Depth: 780 mm Height: 1.795 – 2.005 mm Weight: 118 kg Compressed air: 4 – 6 bar / 0,4 – 0,6 MPa Air consumption: 4 bar 6,5 NL/cycle Air consumption: 6 bar 8,5 NL/c S-Clip: S 625, S 628, S 632, S 638

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

Aircooled chiller CLIMAVENETA FX FC NG SL T+ S 2702 642 KW Cooling capacity: 642 kW / 182.5 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module. Freecooling. Heat exchanger for refrigerant subcooling with coolant. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 14 pcs. Hydraulic module: 2 pcs. water pump Grundfoss NB65-125+Grundfoss TY50-120. 2 pcs. Expansion vessel. Dimensions: 7x2.4x2.4 m. Weight: 9590 kg. Working hours: 1332/1546 h. Condition: Good

Refer to code 1159 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curtains and hoods at the exit with temp ...

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 2200mm Table diameter ... 2000mm Max. table load ... 20000kg Max. workpiece height ... 1710mm Axis Z ... 1000mm Average of the sanding piece ... 180 x 200mm powered tools ... 15 Number of positions in the tool changer... 15 Main engine power ... 58kW L x W x H ... 6700x10400x6400mm Main motor power of driven tools ... 19.5kW Speed of driven tools... 8-3300 rpm Work feed ... 4000mm/min Rapid traverse ... 10000m/min Axis C ... 360° IKZ... 20bar Speed of the clamping plate ... 2-160 rpm Machine weight ... 32000kg Documentation Conveyor C Axis Coverage according to CE marking The machine has undergone a complete overhaul. More info on request. With 1 year warranty.

Key data: 600 mm, 150 mm

Cross-cut saw with saw blade D 600 Roller conveyors at the entrance material Roller conveyors at the outlet material with folding stop W 250 mm Roller conveyors can be expanded per metre

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

Automatic capsule filling machine for dosing liquids into hard gelatin capsules. Incl. liquid dosing unit and feeding unit for capsule-in-capsule applications. The system is in containment version and equipped with capsule formats for sizes 0 and 00. PLC: B&R APC 3100. Output: Liquid in capsules: up to 14,760 pcs/h, Capsule-in-capsule: up to 12,600 pcs/h

Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...

Key data: 400 mm, 620 mm

Machine Details Stock-No. 1105-04057 Type of machine CNC Lathe - Inclined Bed Type Make DMG MORI Type CLX 450 V4 Year of manufacture 2020 Type of control CNC Storage location FRANCE Country of origin - Delivery time to be agreed Freight basis ex site Technical details turning diameter 680 mm turning length 600 mm control Sinumerik 840 SLIMLINE turning diameter 680 mm Greates Pass Round Over Bed 650 mm Spindle diameter in front bearing 130 mm Spindle Bore 80 mm Spindle Taper 140H5 X-AXIS 220 mm Z-AXIS 810 mm tool taper VDI 40 Tailstock Adjustment 600 mm tension force 4 kN total power requirement 21 kW weight of the machine approx. 5.3 t dimensions of the machine approx. 3.8 x 3.0 x 2.1 m Accessories Documents Chip conveyor Coolant system Turret Additional information CNC Turning and Milling Center DMG MORI -CLX 450 V4 CNC DMG MORI SIEMENS SLIMLINE ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 100-600 mm (L x W x H) Taping units 2 x K11R for 50 mm wide tape Electricity 500W / 380V / 240V / 50 Hz Certificate CE compliance

Manufacturer: Citizen Model: M-32 V Year of Manufacture: 2006 Type of Machine: CNC Swiss-Type Automatic Lathe Operating Hours:Approx. 38,000 hours Control System:Mitsubishi Meldas 635 LC Technical Data: - Number of Axes: 10 Axes – HS: Z1, GS: Z2, X2, Linear: X1, Y1, Rev X3, Y3, Z3 - Main Spindle Diameter (HS): C-Axis, 32 mm - Sub-Spindle Diameter (GS): C-Axis, 32 mm - Main Spindle Power / Speed: 3.7 / 5.5 KW, 200 – 8,000 rpm - Sub-Spindle Power / Speed: 1.5 / 2.2 KW, 200 – 7,000 rpm - Spindle Stroke: 320 mm - Main Spindle Speed: 200 – 8,000 rpm - Sub-Spindle Speed: 200 – 7,000 rpm - Max Part-off Length: 65 mm - Max Turning Length: Approx. 145 mm Turret: - Number of Turrets: 1 - Number of Stations: 10 - Number of Driven Tools: 10 - Driven Tool Power: 1.5 KW - Driven Tool Speed: 5,000 rpm - Turret Slide Travel: X2 with 135 mm, Z2 with 202 mm Linear Carrier: - Turning T ...

For sale is this bottle washer from Seitz. This is currently still connected.

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - / Contact us at -

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

SNA-11 Cooling Systems / Cooling Units Location B - Room E04, Cooler and K17, Ventilation 2 units Type Carrier 09CLU04090AF, functional, Built: 1992, HD Condenser Manufacturer: Carrier Refrigeration Technology GmbH Technical Data: - Refrigerant R 422; 25 bar - Includes 2 motors 65M07/65M08; KÜHNE KPER100L, Built: 1991, - 2.2 kW; 380V; 50Hz - Compressors from COPELAND DMRH 750EWM000 Find more here - / Contact us at -

- Year: 2007 - Engine: 15 hp (11 kW) - Maximum pressure: 7.3 bar

Manufacturer: Schultheiss Type of Machine: Vacuum Casting Machine Year of Manufacture: 2017 Power Connection: - TN-C Network: 3x400V, 50Hz/PE - Power: 18 kVA - Current: 27.6A - Fuse: 3x35A Cooling Water: - Pressure: 3.5/8 bar - Temperature (min/max): 18°C/32°C - Flow Rate: 85 l/min Compressed Air: - Output: - Voltage: 300V - Frequency: 4 kHz - Power: 150 kA - Energy: 3200 kWs CE Marked: Yes Find more here - / Contact us at -

Key data: 160 , 8 , 1170

For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037

Key data: 250 , 8 , 2322

For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg

Inv. Num. : 8229 Type: PD-CNC Producer: Spinner Created: 2007 Parameters: Control system: Siemens Max. turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Maximum spindle speed: 8000 1/min Length: 2500 mm Width: 1400 mm Height: 1700 mm Weight: 2300 kg

Manufacturer: Unimac-Gherri Series: Tappatore Mod. Cap. 4-Plastic Year: 2010 Capacity: 10,000 b/hr Formats:current 850ml Specifications: - Voltage 400 V - Frequency 50/60 Hz - Nominal power: 4 kW

CINTEX SENTRY METAL DETECTOR - SPARES COMPLETE FRONT SCREEN MODULE CONSISTING OF METAL WORK, SCREEN AND MAIN BOARD BOXED UNUSED STOCK OTHER MACHINE SPARES AVAILABLE PLEASE DO NOT HESITATE TO ASK

Weight: 350 kg Dimensions (L/W/H): 1930,0 × 1850,0 × 2490,0 mm x-axis: 610 mm y-travel: 305 mm z-travel: 520 mm table length: 760 mm table width: 360 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4x CSW8593-125Y-40P screw compressors, two of which served as replacements, so NEW and not yet in use.

Manufacturer JOHNFORD Model SV-41 + APC – pallet changer Year of manufacture 2007 CNC FANUC 18i MC.2 Table dimensions 1,200 x 600 mm Maximum weight allowed on table 1,200 kg Travel (X / Y / Z) 1,050 / 610 / 610 mm Distance from nose spindle to table 100-700 mm. Distance from spindle center to column 640 mm. Fast feed (X,Y axes) 30,000 mm./min. Fast forward (Z-axis) 20,000 mm./min. Work progress 12,000 mm/min. BT-40 Spindle Cone Maximum spindle speed 60-10,000 rpm Spindle power 7.5 / 11 kW Automatic tool loader Charger type Bidirectional RANDOM Tool loader positions 20 Maximum tool diameter 100 mm Maximum tool length 320 mm Maximum tool weight 10 kg Equipment Internal cooling 20 Bar INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Air conditioning in electrical cabinet INCLUDED Portable steering wheel INCLUDED Automatic pall ...

Cooling capacity: 619,9kW. Heating capacity: 627,7kW. Number of fans: 12x.

SPECIFICATIONS: Installed power: 1.8 kW Voltage: 230 V Saw blade: Ø 380 mm

- Condition: Presentation Machine - Baking Plate Amount: 59 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 7,000 pieces / Hour - Cone Size: approx. 40 mm Equipment: - incl. Drum Roller - incl. Cooling Conveyor - incl. Packing Conveyor

Manufacturer: DMG GILDEMEISTER Model: CTX 310 ECOline Year of Manufacture: 2009 Control System - Siemens Sinumerik 810 D Application - Precision machining of workpieces with a maximum diameter of 200 mm. Features - 12-station turret - Integrated chip conveyor - Workplace lighting - Foot switch - Documentation: DTR Technical Data:  Max. turning diameter: 200 mm Max. pass-through diameter: 330 mm Max. pass-through diameter over cross slide: 260 mm Feed rate in X/Z axis: 160/450 mm Speed in X and Z: 24 mm/min Max. spindle speed: 5000 rpm Spindle bore: 51 mm Spindle drive power (40%/100% DC): 16.5/11 kW Max. spindle torque (40%/100% DC): 166.5/112 Nm Tailstock stroke: 400 mm Tailstock force: 400 daN Operating hours (as of 06.03.2025, still in operation): 48,066 h Installed power: 21 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): approx. 4150 x 1700 x  ...

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions