caterpillar 3516 c used for sale

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...

The painting line is designed for varnishing elements made of MDF or HDF board. Spray booths have two circuits: one for clear coat and the other for color paint. The line is designed for water-based UV varnishes. The line consists of the following elements: - feeding table with an automatic robot from the Italian company NEOMEC - transport table with a cleaner - shower cabin from the Italian company GIARDINI DUALTECH 416 r.2017 - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - turntable - transport table - transport table with a cleaner - automatic painting machine - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - receiving table with a robot from the Italian company NEOMEC

was used for Plastic products Nerling systemraeume - manufacture Find more here - /

The plant was installed in 2011. Vacuum conveying system operated by VOLKMANN, for grinding products in a HOSOKAWA sieve mill with enclosed metal detection. In addition available: BUSCH vacuum pump, KAESER compressor, VALCO dust extraction system, MOTEC suction device for product feeding table and much more. All components (except the exhaust system BJ 2009 and the HOSOKAWA Bexmill 200 Year ca. 2006) are from this year. There are no recorded operating hours, but should be around 6000h. The plant was decommissioned in 2019. The plant has been cleaned and disassembled. But could be put into operation for a demonstration or for recording presentation videos. Find more here - /

Machine: Cut 25 line Manufacturer: Alpma Type: Cut 25 Year of manufacture: 2003 the Alpma Cut 25 line consists of: Alpma CUT 25 cutting machine Boekels piece scale Auto. Discharge for underweight pieces (cut or section) Auto. Discharge for overweight pieces (first cut or cut-off) Belt for 90° rotation of pieces Accumulation belt/intake belt for downstream form fill and seal machine The line was fully functional and had no defects. It was always maintained. the Boekels is installed on the right (after the CUT 25 cutting machine). Flow direction is from left to right. Documentation is available. Knife width 250mm Max. bar length approx. 800mm 120 cycles/min. A checkweighter is also still available if needed The line is dismantled and stored. If you are interested, you are welcome to inspect the line. Find more here - /

The Combi-Pack CW 500 – S is a packaging machine used for combining and packaging products in various industries. Here´s a general description and specifications for the Combi-Pack CW 500 – S: Machine Description: The Combi-Pack CW 500 – S is a versatile and efficient packaging machine designed for high-speed packaging applications. It incorporates advanced automation and control systems to streamline the packaging process and increase productivity. The machine is built with robust construction and precision engineering to ensure reliable and consistent performance. Specifications: 1. Packaging Speed: The CW 500 – S offers a high packaging speed, typically capable of packaging up to X products per minute (specific speed may vary based on product size and characteristics). 2. Product Compatibility: The machine is suitable for packaging various types of products, including bu ...

APV 16" Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16" wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625" x 1.25" - 3/60/480v - Machine on casters - Footprint approximately 11´ long x 4´ wide Find more here - / Contact us at -

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Fully functional 3-axis milling machine of the brand Micromill with 16-fold tool changer. 3-axis vertical machining centre Micromill Challenger MM-430 with FAGOR 8055 i/A control This machine does not have internal spindle cooling. The spindle was replaced by the previous owner 2 years ago and then only ran for 3 months in 1-shift operation (estimated approx. 500 h). Machine run perfectly. Dimension: Length (without chip conveyor) = 2784 mm (table cladding), 2200 mm (full cladding) Width = 1996 mm (table cladding), 1848 mm (full cladding) Height = 2304 mm (table cladding), 2412 mm (full cladding) Weight = 3000 kg Space requirement = 3600 mm x 3100 mm M a x . Power consumption = 35 KVA All axes: KUVE 35 X-axis guide distance: 300 mm Y-axis guide distance: 620 mm Z-axis guide distance: 400 mm further specifications in the pdf files Find more here - / Contact us at -

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Chip shredder for material from the gunmetal or brass sector. Manufacturer: Erdwich Zerkleinerungsmaschine GmbH Condition: Little used; good to very good. - Range of application: Shredding of gunmetal or brass chips - Throughput capacity: 150 kg/h - Process sequence: The containers with the chips are fed into the hopper of the shredding machine by means of a forklift truck. The dumping height is approx. 2,950 mm. The shavings are crushed by the crushing plant and discharged into the on-site container. Occasional impurities are discharged via the impurity flap and and discharged into a separate container. Operating Instructions: 1 x in paper form; 1 x as CD-ROM in German or English. Temperatures: The system/machine as well as its switchgear combination (control) are designed for operation from 0 to 35 degrees room temperature at 60 % humidity. Deviating operating conditions r ...

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

It is a vacuum conveying system with a conveying capacity of approx. 1 ton per hour. Vacuum conveying and product feeding table is from VOLKMANN. Dust extraction at the product feeding table is from MOTEC Dust extraction system from VALCO Compressed air from KAESER Vacuum pump from BUSCH Metal separator from MESOTRONIC Sieve mill from HOSOKAWA BEPEX The products are fed onto the sieve mill and then fall by gravity into a bigbag (bigbag rack and pallet scale are also part of the system). The plant is currently cleaned and thus partly dismantled. However, it could be put into operation as a demonstration. Find more here - / Contact us at -

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration" section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - / Contact us at -

XS425 machining centre Scope of delivery Machining centre Floor pan Coolant system Chip conveyor HSKl 00A holders without tools / measuring probes (negotiable) Pallets without table superstructures / clamping centre Condition: Extremely stable machine Machine under power and producing Machine processes forged steel bars made of 1.3343 all round, before heat treatment 37961 operating hours Procurement of a machine with a larger working area Used machine, sale without any warranty / bought as seen. Find more here - / Contact us at -

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - / Contact us at -

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

1984 Messer Griesheim Statosec KSP 4000 CNC Blow Cutting Torch: Technical Condition: operational Manual: Attached Specifications: Technical data: Fuel: acetylene or propane gas Number of burners: 4 (programmable 1 burner) Sheet thickness: 8 - 200 mm. Sheet dimensions: 3000 x 6000 mm. The burners are driven by a steel belt. Space requirement: 4900 mm wide 9400 mm long 5000 mm high High speed: 6000 mm/min. Cutting speed: 10 - 1000 mm/min. Drives: DC servo motors Programme control: Burny 10 LCD plus Programmable on the machine tool and has a programming workstation. workstation. Programme: Burny 10 OEM Plus Year of manufacture: 1984. Find more here - / Contact us at -

2012 Chiron DZ 12 KWM HS 328-03 Profile CNC machining centre Chiron milling machine - double-spindle - with pallet changer - HSK-A63 Accessories and tools are not included. We still have a few holders (shrink fit chucks) that we can provide. A chip conveyor from Knoll is included, as well as a cooling tower from DeltaTherm. Technical data Year of construction 2012 Axis travel: X 550 / Y 400 / Z 360 mm Spindle distance in X-axis: 250mm Weight: 7700kg Tool magazine: 16 places per spindle Tool holder HSK-A63 Fanuc 31i-A5 - 5-axis contouring control Fanuc tool life monitoring Integrated workpiece changing device IWW 0/180° Spindle speed 15000 rpm, max. 45Nm Speed acceleration / deceleration from 0 to 12000 rpm in 0.6 seconds Chip conveyor with scraper belt Coolant system KF 150/FKA500 Chiron maintenance instructions on screen Operating hours and parts counter Oil-fre ...

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

For sale is a Wagner WAC 70 circular saw in excellent condition, including a bundle loader. This high-quality machine is ideal for precise cutting and efficient handling of wood and workpieces in wood processing. Type: Circular saw Model: Wagner WAC 70 Additional equipment: Bundle loader Features of the Wagner WAC 70: Precision: The WAC 70 offers precise cuts for a wide range of wood types and formats. Performance: Robust construction for a long service life and high performance. Efficiency: The integrated bundle loader enables fast and efficient material feed, which significantly speeds up the production process. Operating Voltage: - Main: 400V, 50Hz - Control Voltage without transformer: 230V - Control Voltage with transformer: 25V Rated Current: 23A

Vertical CNC Machining Center Chiron FZ 08K S Magnum SK with NC swivel head, rotary table package, bar loader, and removal device. - Operating Hours: 30,682 h - Last Spindle Replacement: 10/2021 Technical Data: - Control System: Siemens 840D (PCU 20 / NCU 572.4) - NC Swivel Head: Swivel Range -20° / +115° - Motor Spindle: Water-cooled, 15,000 RPM - Travel Paths: X 450mm / Y 270mm / Z 310mm - Rapid Traverse (X/Y/Z): 75 m/min. / Acceleration X 1g / Y 1.5g / Z 2g - Tool Slots: 40, HSK-A 40, Span-to-Span Time 2.6 sec. vertical Additional Equipment: - Preparation for Bar Processing - Rotary Table Package: AWU 160 with D105mm (Positioning Axis) - Collet Chuck: Hainbuch Spanntop D100 - Additional Device: 6th Side - Handling and Removal Device for Finished Parts - Bar Loader: IRCO SiMag 100.1-3000 (Round and Profile Material) - Flushing Gun - Machine Preparation for IKZ - High Pressure: 7 ...

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

CNC lathe Type: BNA-42 DHY Manufacturer: Citizen/Miyano Year:2011 Control: Fanuc Hours: 23240 Number of spindles: 2 Number of turrets: 2 Number of c-axes: 2 Number of y-axes: 1 Bar diameter (max): 42 mm Max turning length: 150 mm Main spindle Spindle revolutions (max): 6000 rpm C-axis: yes Counter spindle Spindle revolutions (max): 5000 rpm C-axis: yes X1 axis: 140 mm Z1 axis: 235 mm Y axis: 70mm(±35) X2 axis: 140 mm Z2 axis: 360 mm Number of tool positions (total): 14 Rotation speeds (max): 5000 rpm Mains power supply: 31 kVA Mains voltage: 400 V Mains frequency: 50 Hz Dimensions: 2240 x 1450 x 1660 mm Total weight approx.: 3100 kg Bar feeder IEMCA Boss 552 HD Machine in good condition, under power Find more here - / Contact us at -

Key data: 1350 mm, 11000 mm

CNC Lathe Make Swift CNC Fanuc 21i-MB Inspection Under Power Year 1978 Between centers .. 11,000 mm Swing over Bed .. 1,350 mm Swing over Carriage .. 1,000 mm Chuck dia .. 1 ,200 mm Max. Workpiece weight …….. 20 ton Motor power ………………………… 40 kW RPM …………………………………………….150 c/w 2 steadies

AIRCOOLED CHILLER CARRIER 30RB090R 93.4 kW Cooling capacity: 93.4 kW / 26.5 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Type of refrigerant: R32 Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Number of fans: 2 pcs. Dimensions: 2,3х2,1х1,3 m. Weight: 700 kg. Working hours: 0/0 h. Condition: New

Used Side loading case packer IMA CP6. Year of construction 2013 The machine has been modernized to meet the requirements of pharmaceutical product serialization

SPECIFICATIONS: Chain operation Installed power: 1.5 HP

AIRCOOLED CHILLER Galletti MPE 019 C0 AB CAT2 19,7 KW Cooling capacity: 19,7 kW / 56 tons (12/7 — 35°C) Hydraulic module: 1 pcs. water pump (LOWARA CEAM70/3/A), expansion vessel Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 1 pcs. Copeland ZP91KCE-TFD-522 (scroll) Number of fans: 4 psc. Dimensions: 1.6х0.7х1.4 m. Weight: 316 kg. Condition: Good

AIRCOOLED CHILLER Stulz Cfo4202A 425 kW Cooling capacity: 425 kW / 120.8 tons (12/7 — 35°C) Year of manufacture: 2008 Options: Freecooling Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Type of refrigerant: R410A Compressors: 3 pcs. Copeland ZP385KCE-TWD-522 / 3 pcs. Copeland ZP295KCE-TWD-522 (scroll) Number of fans: 8 pcs. Dimensions: 3.9х2.3х2.4 m. Condition: Good

Manufacturer: EDEL Model: CM800 MT . Year of construction: 03/2020 Spindle running time: 3,469 h Spindle torque: 253NM / 12,000min-1 / HSK 63 Travel distances: 800/900/620mm Control: Heidenhein TNC 640 Rotary function: 4,000Nm / 750rpm / Drm 800mm / max. 2,000kg Pallet changer: 6-way; pallet weight max 1 ton (pallet + workpiece) Tool changer: 60 places (expandable to 120 places) Find more here - / Contact us at -

ID3448 Demag 3160 – Challanger year/Baujahr 2012 6900 hours/hours, 118.000 km 50 m mast, crane completely overhauled 50 m mast, crane completely overhauled

Chiron FZ18W Magnum, rotopallet, 1999, CNC Siemens 840D, X 630 Y 400 Z 425, tables (2) 850x450mm, 20 tools, ISO 40 / 18kW / 140 Nm, 40m/min, HAWE hydraulics, automatic doors, swarf conveyor, 6 ton, 3,6 x 2,25 x 2,85, machine can be inspected under power in our warehouse, Mimu Machine Tools (Italy)

CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

Aircooled chiller/Heat pump Climaveneta AWR HT D LN CA E 0152 44.5 kW/50.4 kW Cooling capacity: 44.5 kW / 12.65 tons (12/7 — 35°C) Heating capacity: 50.4 kW / 14.33 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Recuperation. Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH24KVE-TWD-526 (scroll) Type of refrigerant: R407c Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump EBARA DWC-V/I 300/1.1-Q1AEGG Dimensions: 2.2x1.15x1.5 m Weight: 830 kg Working hours: 0/0 h. Condition: New

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg

Control, Fabr. CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Rod Ø max. 16 mm, Turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Sub-spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front apparatus, reverse side machining), Parts Conveyor Belt Conveyor Fire extinguishing system Charging magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be viewed by appointment. Changes and errors in the technical data and specifications as well as prior sale reserved! control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10,000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, Counter Spindle Speed max. 10,000 RPM, incl.  ...

Lips Drunen W006927795 Printed Circuit Board REV 1 23456789 Wärtsila Tuningcenter

Key data: 2000 mm, 1300 mm

available Berstorff Bias Cutter Angle 0-50 degrees with manual splice 90 degree with automatic splice Ce certified Description attached!

CECCATO CSM 5.5 X mini screw compressor Power 4kw Working pressure 10bar Capacity approx. 470l/min Noise level 62dB Dedicated dehumidifier Air tank 270l

Code: 0013 Brand: COSMEC - ITALY Model: SA/31-10 - CE Standard 3-axis CNC working centre with NESTING table for wood, furniture, panels, plastics, composites and various materials - CE Standard Table NESTING dimensions mm 3100 x 1000 X axis stroke mm 3250 - Y axis stroke mm 1400 - Z axis stroke mm 300 Feed speed X - Y mt/min 56 Feed speed Z mt/min 12 Maximum clearance above worktable mm 250 Milling unit Hp 10,7 (Kw 7,9) - ISO30 attachment at 18000 rpm Automatic tool changer with 6 positions - Inverter power Kw 11 - Rpm 500/18000 Vacuum pump 100 mc/h Numerical control OSAI series 10 Automatic lubrication Side guards Compressed air 8 bar Weight kg 3200

Jaw Crusher System for Sale Manufacturer: 3-B-Systeme Year of Manufacture: 1992 Operating Hours: 2,144 h The system consists of the following components: - . (Pos.1) 1 piece Müller jaw crusher, Rottweil, 800x500 mm inlet opening .Jaws approx. 70-80%, upper part new. - (Pos.2) 1 piece of steel construction from 3-B-Systems with pre-screening and bunker attachment - (Pos.3) 1 piece crushed material discharge belt - (Pos.4) 1 piece overband magnet - ( Pos.5) 1 piece 200 kVa power generator, soundproofed Find more here - / Contact us at -

Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Speeds 5,000 min-1 8-speed revolver Minimum quantity lubrication