129,020 used machines on RESALE, but how to find them? Machine Search
centrifugal pump, water pump -Flow rate: 15 m³/h -Pumping height: 11 m -Motor power: 1.1 kW -Speed: 1420 rpm -Number: 2 pumps available Price: per piece -Dimensions: 380/270/H480 mm -Weight: 44 kg/piece
Immediately available completely overhauled shop air coolers
Immediately available used lubricating oil coolers
Immediately available used exhaust gas compensator
Immediately available overhauled gas-oil flow covers, also used ones we have all in stock
Immediately available new
Can filler, manufacturer Framax Italy, year of construction 2018, 6 head rinser, 6 filling valves, 1 seamer head, standard can 211/202, capacity approx. 1,200 cans / hour, set up to 0.33 / 33cl / 330ml + 0.44 / 44cl 440ml Can filler, Made Framax Italy, Year 2018, 6 nozzle rinser, 6 filing valves, 1 head can seamer, standard can 211/202, Capacity aprox. 1.200 cph, adjusted to 0,33 / 33cl / 330ml + 0,44 / 44cl 440ml
SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh
Cylinder Head Overhauled PHASE I and PHASE II Also used immediately available
Key data: 30 m³/min, 7
Type: ZT 30 Year of Make: 2000 Power (kW): 30 Pressure (bar): 7.5 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; Electronics industry; Medical & Healthcare
Has been used for cooling hot pouches of sauce in a large sauce factory. Could possibly be used as a large blancher.
Key data: 50
Atlas Copco GA50VSD Screw air compressor in good condition.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 28 cooling units are available. All 28 cooling units fit into a 40Hc container for transport.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.
UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts
Key data: 500 mm, 420 mm, 400 mm
Machine Details Stock-No. 1105-04021 Type of machine Machining Center - Universal Make LID MAHO DMG Type CMX 50 U 5-axis Year of manufacture 2020 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details X-Travel 500 mm Y-Travel 420 mm Z-Travel 380 mm control HEIDENHAIN TNC 620 tool adaptor SK 40 turning speeds 12000 1/min table surface area 500 X 380 MM mm tool change unit 30 pos. total power requirement 40 KVA 63 A Absich Additional information CONTROL HEIDENHAIN ITNC 620 NC round-swivelling table, coolant device,TOOLS PROBE PARTS PROBE COOULANT TROUGHT THE SPINDLE Cabin
Probst & Class/ K 180 EL GLEN-GK/ 2017/18 Colloidal mill 2 available, price per piece For vegetable for example carrots used, sold as it is, where it is, price ex location
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 7.5 kW -Input: 380/415 V 50/60 Hz -Output: 11.0KVA 380/415V 16.5A max. 7.5kW max. 50/60Hz -Dimensions: 290/520/H220 mm -Weight: 10 kg
for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG
Cylindrical roller bearings -Type: 30313 Price: per piece Quantity: 3 available -Weight: 2.4 kg
Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg
We sell a Carrier chiller 30 GH 100 0171 AEE, built in 1997
Pinion Shaft for Poly Clip FCA 160 - NEW Product number 315593 / 193118 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
Computer, on-board computer, organizer -Type: Organizer 2 Compilot 400 -Number: 2 organizers available Price: per piece -Weight: 0.8 kg
Inv. Num. : 7736 Type: CL2000B Producer: MORI SEIKI Created: 2008 Parameters: Control system: Mitsubishi MAPPS III Switch-on hours: 37200 h Maximum turning length: 560 mm Max. turning diameter: 350 mm
Opem Colibri 4 S bagging machine - Used for Senseo pads - Perfect working condition - Free immediately -
snow chains -the automatic snow chain - fascinatingly simple and fast -1: Pair Price: complete -Weight: 10 kg
Key data: 10000 , 3950 , 2500
Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.
Cube Slicer/Dicer Emens MDL 60 for bacon/ham cubes, approx 8x8mm 1500-2000 kg/hr.
Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%): ...
ID3356 Corrosion repair framework year/Baujahr 2021 25-28 t Corrosion repair framework Corrosion Touch Up Scaffolding
Metos Proveno CoolPro 80E combi kettle Stainless, 80L, combi kettle, jacketed, 20.75Kw, temp range from 0'C to 120'C, with variable speed agitation, adjustable timer and temperature settings and more, with manual, 3Ph
GRUNDFOS Vertical centrifugal pump CRN90 X-F-G-E HQQE 3x400V 45kW Model No: B96610310P11431 This pump is only sold by bid. Make a fair offer, then we will agree. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health
GRUNDFOS Vertical centrifugal pump CRN90 X-F-G-E HQQE 3x400V 45kW Model No: B96610310P11431 This pump is only sold by bid. Make a fair offer, then we will agree. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health
Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters
Manufacturer: Ruhle Type: Frozen block cutter Model: GFR 450 Infeed dimensions: 450 mm x 330 mm Knife width: 450 mm Total dimensions: 1700 mm x 700 mm x 1450 mm Voltage: 400 V, 3 Ph, 50 Hz Power: 5.5 kW, 16 A
Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver
Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.
MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...
BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...
Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!
maximum number of results exceeded
please refine your search
