caterpillar 3516 c used for sale

Cariba AV30/132 vertical cartoner, intermittent motion, reverse tuck closure, machine on wheels, carton size range: min. 15 x 15 x 70 mm (AxBxC), max. 200 x 120 x 300 mm (AxBxC), output up to 50 strokes/minute, electrics 400V/50Hz, machine footprint approx. 2900 x 1600 mm (LxW), machine height approx. 1695 mm, machine net weight approx. 900 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

Centrifugal pump, high pressure pump, water pump -Max. Delivery rate: 2.0 m³/h -Dimensions: 360/140/H340 mm -Weight: 11 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: max. 230 mm -Payload: 3000 kg -Number: 4x drives available -Price: per piece -Dimensions: 390/250/H200 mm -Own weight: 38 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece

Mould transport system, capway

Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Computer, board computer, organizer -Manufacturer: CV90-52689-12 -Type: CV90-52689-12 -Number: 2x organizers available -Price: per piece -Weight: 0.8 kg

Punch for clipping machine Poly-Clip 59895 36 mm for FCA 3461, 3462, 3463, 3430-18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Cylinder pneum. kpl. for Poly Clip FCA 3430,3430-18 ,3463 ,FCA 120,160 - NEW order no. 150390 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT No.: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36

Punch for clipping machine Poly-Clip 163787 36 mm for FCA 90, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Copy head, copying head, copying device, copying lathe -Copy head for: lathe -with: hydraulic unit -Transport dimensions: 1200/800/H650 mm -Weight: 216 kg

Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62391 - Klipper 18/13 / BR 36mm , koddiert, für FCA 80, FCA 3430-18,FCA 3461, 3462, 3463 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Format adjustment motor for Poly Clip FCA 120-S3160-S3 ,AHL 1200 - NEW 24 V Article number 167554 FCA 120/160 169753 AHL 1200 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : Die 156684 - clipper 15/11 / br 30 mm coded , for FCA3430/18, FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 157073 - Klipper 15/8 , br 30 mm koddiert , for FCA 3430/18,FCA 80,100,140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164005 - Klipper S 07 / br 26 mm , not coded , for FCA 120,160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 164068 - Klipper M 09 / br 30 mm not coded, for FCA 120, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273113 - Clipper M 07 / 30 mm , not coded for FCA 80 , 90, 100, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273115 - Klipper M 07 / 30 mm c2, koddiert, für FCA 80 , 90, 100, 120, 140, 160 Request a Quote Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 40526 - 30 mm, not coded, for FCA 3430 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Fabr. No.: 181308 Equipment / Additional information: Flow rate: 40 m3 / h Compression end pressure: 0.6 bar Motor power: 1.5 kW / 1400 U/min.

die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 62147 - Clipper 18/11-12 / br 36 mm, single-sided coded for FCA 3461, 3462, 3463 , FCA 3430/18 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Input: 380/440 V 3.7 kW -Frequency: 50/60 Hz -Power: 3.7 kW -Weight: 3.3 kg

Control amplifier, servo motor control -Case: without control cards -Quantity: 2x cases available -Price: per piece -Dimensions: 700/500/H320 mm -Weight: 40 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 40 mm -unused -Dimensions: 670/120/H120 mm -Weight: 11 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 2.2 kW -Input: 380-480 V 50/60 Hz -Output: 4 kVA 5.8 A -Number: 2x available -Price: per piece -Dimensions: 340/85/H230 mm -Weight: 4 kg

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

Motor control, controller -Manufacturer: Phoenix Contact, Mosca Motor Control -Type: EG 45 ME2213 -Number: 12x available -Price per piece -Dimensions: 75/45/H130 mm -Weight: 0.3 kg/pc.

Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 25 mm -Stroke: 320 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 51/64/H530 mm -Weight: 4.75 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 245 mm -Total length extended: 325 mm -Dimensions: 54/54/H245 mm -Weight: 1.1 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Total length: 290 mm -Total length extended: 390 mm -Dimensions: 48/48/H290 mm -Weight: 0.9 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, -Stroke: 100 mm -Piston: Ø 50 mm -Piston rod: Ø 18 mm -Total length: 340 mm -Total length extended: 440 mm -Dimensions: 66/66/H340 mm -Weight: 2.1 kg

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, tie rod cylinder -Stroke: 260 mm -Piston diameter: 80 mm -Piston rod: 18 mm -Total length: 610 mm -Total length extended: 870 mm -Weight: 6.55 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: SMC -Type: C91SD80-320 -Piston: Ø 80 mm -Stroke: 320 mm -Pressure: max. 10 bar -Number: 2x available -Price: per piece -Dimensions: 101/101/H585 mm -Weight: 8.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 16 mm -Stroke: 260 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 457/43/H38 mm -Weight: 2.45 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 25 mm -Piston rod: Ø 12 mm -Stroke: 50 mm -Admission piston rod: M10 mm -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 242/43/H38 mm -Weight: 1.37 kg/piece

Panel lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper -Sheet metal claw -Wingspan: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminal available -Price: per piece -Weight: 29 kg/piece

CNC lathe LB 3000 EX II Manafacture: Okuma Corporation Year of manufacture: 2017 Control OKUMA ... OSP-P300LA Turning diameter ... 580mm Turning length ... 950mm inclined bed Axis Y ... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 0-5000 rpm. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under power.

Conductivity/MOhm transmitters for inductive and conductive sensors in the field housing. Degree of protection IP 65. Operation with menu navigation and Communication display. Signal outputs: 0/4..20 mA for conduction Ability and temperature, 2 output Contacts. Continuous polarization compensation. Adjustable: Monitoring of the USP limit, concentration measurement of customer-specific media, Characteristic curves for current outputs.

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Adjustment: SK50 -1x clamping sleeve: Ø 16 mm -Weight: 4.5 kg

Technical details: RA1025 Manufacturer: Caljan Type: belt curve 60° CC 080 XBK 641 / 054 Year of construction: 2008 Angle: 60° Direction: Left Nominal radius: approx. 600 mm Width: 500 mm Conveyor speed: v = 17 m / min v = 0.28 m / sec Top height cheek: 860 mm + 200 adjustment Strap type: E12/2 UO/U6S GSTR C black Number: 1 x (article no. 20140027) Condition: Used / fully functional Color: Blue (RAL 5002) More information: incl. 2 supports Gear motor Manufacturer: Lenze Features: Construction year: 2008 condition: very good (used) Nominal / inner radius in mm: 600 Belt width in mm: 500 angle: 60° Driven: YES Running direction: LEFT Engine type: Lenze Getriebemotor Conveyor speed m / s: 0,28 scope of delivery: including supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir  ...