caterpillar 3516 c used for sale

General SKU379X952 MakeCuccolini LocationBarneveld CEcheck TypeCM 110 M4 Main Features MaterialStainless steel Surface0.2 m2 Sizes diameter500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,2 m² Number of sieve decks:1 Sieve sizesø 500 mm With covercheck Inlet70 mm / 145 mm Outlet80 mm / 100 mm Drive vibro motorcheck Motor0,30 kW (400 V, 1500 rpm) Sieve perforation0,514 mm With ring cleaningcheck With extra sieve decks2x 0,514 mm MaterialStainless steel 1.4301 (304) Information No.160112920 Year of construction2016 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space0,80x0,80 m Total height1,20 mVibro sievesCuccolini ItalySieves > Vibro sievesBrand > Cuccolini Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any des ...

This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.

General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

This 3-axis AGIE Charmilles CUT 20 wire EDM machine was manufactured in 2008. It features a working area of 350mm (X) x 250mm (Y) with a maximum machining height of 220mm in Z. If you are looking to get high-quality EDM capabilities, consider the AGIE Charmilles CUT 20 machine we have for sale. Contact us for more information.

General SKU391X1060 LocationBarneveld CEcheck MakeMettler Garvens Main Features MaterialStainless steel Motor0.55 KW Specified Features - Miscellaneous transport MaterialStainless steel Miscellaneous transport Capacitymax 20.000 gram Capacitye=d= 5 gramm Information TypeS 100 Mach.No.151014 Year of construction2004 Floor space1,30 x 1,15 m Total height1,25 m Weight280 kg Extra Specifications Belt size: 1100 x 500 mm Max. weight: 20.000 g Min. weight: 800 g Max. temp.: 5 °C/ 40 °C Belt speed: 33-12 m/minMiscellaneous transportMettler GarvensConveying systems > Miscellaneous transportBrand > Mettler Garvens What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

This 3-axis AGIE AGIECUT CLASSIC S erosion machine was manufactured in 2000. It has impressive axis movements with x=350mm, y=250mm, and z=256mm, providing ample flexibility for handling erosion tasks. The machine accommodates a maximum piece size of 750mm in length, 550mm in width, and 250mm in height, and it can manage weights up to 200kg. The dimensions and capabilities make it suitable for a wide range of erosion processes, ensuring detailed and precise outcomes. The AGIE AGIECUT CLASSIC S machine we have for sale is designed for robust performance and precision. Contact us for more information about this erosion machine.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

General SKU379X1441 MakeInstron LocationBarneveld CEcheck TypeC-6898-000 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Viscosity test machine Viscosity metercheck (Notching press) Electric capacity230 volt Motor0,03 kW, 230 volt MaterialStainless steel Information No.50009 Year of construction2019 With switchcheck Floorspace0,52x0,44 m Total height0,44 m Weight43 kgViscosity test machinesÌnstronPlastic machinery > Viscosity test machinesBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This COMCO CTR201-2 was manufactured in 2022. It features 1,264 machine hours and comes with a variety of options including a magnifier MB4320-1, abrasive hose MB1233-25, and replacement HEPA filter assembly CTR280-1. Additional parts include conductive nozzles and a 100 Micron Wheat Starch supply. Contact us for more information.

General SKU379X1448 LocationBarneveld MakeCollin TypeTischwalzwerk Main Features Size length210 mm Specified Features - Mixing mill Laboratory presscheck Motor4 kW 380 V Mixing mills MaterialStainless steel Information Mach.No.141 11 86 Year of construction1986 With switchcheck Floorspace1,13 x 0,45 m Total height0,60 m Weight150 kg Extra Specifications2 roller wals, roll dia. 100 mm, roll width 210 mm :Mixing millsCollinPlastic machinery > Mixing millsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X941 MakeIntron TypeCeast 9050 Mach.No.9050B18055 Year of construction2019 Main Features MaterialMild steel Motor0.05 KW Specified Features - Miscellaneous MaterialMild steel Motor0,05 kW, 115/230 volt Information LocationBarneveld Floor space1,0 x 0,45 m Total height0,95 m Weight220 kg CEcheck Extra SpecificationsImpact Energy Range: 0.5 J to 50 J (0.37 – 36.9 ft-lb). Display &: Control: Integrated touch panel with embedded PC for test control and results. (as is) :MiscellaneousÌnstronMiscellaneous > MiscellaneousBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis CHARMILLES ROBOFORM CT 400 was manufactured in 1996. It features X-axis travel of 450 mm, Y-axis travel of 320 mm, and Z-axis travel of 410 mm. The tank dimensions are 1195x800x400 mm, supporting a maximum workpiece weight of 800 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM CT 400 machine we have for sale. Contact us for more information.

This AgieCharmilles Agiecut Classic V3 was manufactured in 2007. A wire EDM machine, it features dimensions of 1940 × 2300 × 2600 mm and a total weight of 3460 kg. It supports workpiece dimensions up to 1050 × 650 × 420 mm and a maximum weight of 800 kg. The machine offers a taper angle up to ±30° and a dielectric volume of 1000 liters. Contact us for more information about this machine.

This EXPERT cut Expert ecocam 2 was manufactured in 2024. It features a high positioning speed of 90 m/min and can handle cutting heights up to 100 mm. The machine operates on a PC-based NC software and supports various tool options including electric oscillating knives and driven circular knives. Ideal for cutting leather, textiles, and foams. For more information about this machine, please reach out to us.

General SKU410X1239 LocationBarneveld Main Features MaterialMild steel Inlet diameter150 mm Specified Features - Rotating valve MaterialStainless steel 1.4552 Rotary valvecheck Rotor with scraperscheck Rotor diameter120 mm Rotor width150 mm Number of locks:8 Lock sizes10x50x150 mm Capacity150 ml per lock Inletø 150 mm Inlet flange sizesø 280 mm Outletø 150 mm Outlet flange sizesø 280 mm Installation height280 mm Without motorcheck Information MakeDMN TypeAL 150 2 MZC Easy Floorspace1,00x0,50 m Total height0,42 mRotating valvesDMN WestinghouseRotary valves > Rotating valvesBrand > DMN Westinghouse What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

This 5-axis AGIE CUT 400 Sp wire EDM machine was manufactured in 2013. It features a high-speed CC generator, automatic threading, and rethreading for wires from 0.30 to 0.20 mm. The machine includes a PC-based control system with a touchscreen and offers advanced NC functions like 3D graphic simulation and integrated documentation. If you are looking to get high-quality EDM capabilities, consider the AGIE CUT 400 Sp machine we have for sale. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

This 3-axis CHARMILLES HD10 start hole drilling machine was manufactured in 2002. It features a work table size of 600x300mm, XY-travel of 350x250mm, and can handle a maximum workpiece weight of 450kg. Ideal for precise erosion tasks, the CHARMILLES HD10 machine we have for sale represents a robust addition to any machining setup. Contact us for further details regarding this machine.

General SKU431X1349 MakeWeiss Technik LocationBarneveld CEcheck TypeEKE 15.80.31 Pressure Working pressure18 Bar Vacuum possiblecheck Main Features MaterialStainless steel Specified Features - Drying oven Climate boxcheck Number of compartments:1 Internal width235 mm Internal depth230 mm Internal height560 mm Electric heatingcheck Electric capacity230 volt Number of doors:1 With fancheck Motor0,12 kW, 380/220 volt, 1370 rpm Information No.071532 - Eke 15.80.31 Year of construction2007 With switchcheck Floorspace0,40x1,13 m Total height0,96 m Weight200 kg Extra SpecificationsRefrigerant R134a,  :touchscreen controlDrying ovens-Dryers > Drying ovensBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKU397X1073 MakePfaudler-Werke LocationBarneveld TypeCH25000 Main Features MaterialGlass Volume27222 Ltr. Pressure0 Bar Specified Features - Horizontal tank MaterialGlass - Enamel (WWG-9115) Horizontal tankcheck Capacity27222 l. Manholecheck Top connectionscheck Outletcheck Max. temperature-10°C/+50°C Information No.62764 Year of construction1997 Mounted on legscheck Weight7600 kgHorizontal tanksPfaudler-werkeTanks > Horizontal tanksBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis AGIE CUT 300 wire EDM machine was manufactured in 2013. It features a maximum taper angle of 30/100° mm, can handle workpieces up to 1050 x 650 x 250 mm, and supports a maximum weight of 400 kg. If you are looking to get high-quality EDM capabilities, consider the AGIE CUT 300 machine we have for sale. Contact us for more information about this machine.

This 5-axis AgieCharmilles CUT 300MS was manufactured in 2016, featuring submerged wire-cutting technology. It supports a maximum workpiece size of 1200 × 700 × 400 mm and a weight up to 1500 kg. The machine offers rapid movement across X, Y, U, V axes at 9.8 m/min and includes integrated collision protection. If you are looking to get high-quality precision cutting capabilities, consider the AgieCharmilles CUT 300MS machine we have for sale. Contact us for more information.

This CAMFIL Quantum Series 2 was manufactured in 2020. It features a robust steel construction, designed for continuous industrial use with a motor power of 4 kW and airflow of approximately 2,000 m³/h. Ideal for metalworking processes, it includes an energy-saving fan and a maintenance-friendly design with easily accessible filter elements. Consider the opportunity to buy this CAMFIL Quantum Series 2. Contact us for more information about this machine.

General SKU340X783 LocationBarneveld MakeIshida TypeDACS-GN-SE050-35-SS-I-S Specified Features - Miscellaneous transport Capacity5000g Motorcheck 230v Information No.560012086 Year of construction08-2017 Floor space1,7x0,9 m Total height1,4 m Weight160 kg Extra Specificationsishida checkweigher: Max belt speed: 90m/min max weight: 5000g minimum weight: 32g division value: 2g equipped with receipt printer conveyor length :950 mm conveyor height : 800mm, adjustable comes with an additional conveyor : brand: Böske type: FB350/500 year: 08-2017 conveyor length 570 mm conveyor height 800, adjustable Miscellaneous transportIshida Co. Ltd.Conveying systems > Miscellaneous transportBrand > Ishida Co. Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU340X781 LocationBarneveld CEcheck MakeIshida TypeDACS-GN-SE050-35-SS-I-S Specified Features - Miscellaneous transport Capacity32-5000g Motorcheck 230v Information No.560012087 Year of construction08-2017 Floor space0,95x0,75 m Total height1,37 m Weight100 kg Extra Specificationsishida checkweigher: Max belt speed: 90m/min max weight: 5000g minimum weight: 32g division value: 2g equipped with receipt printer conveyor length 950 mm conveyor height 750 mm, adjustable Miscellaneous transportIshida Co. Ltd.Conveying systems > Miscellaneous transportBrand > Ishida Co. Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340X784 LocationBarneveld MakeBoekels TypeEWK 2000+/WS 1,25 KG CD Klasse X Main Features MaterialStainless steel Specified Features - Miscellaneous transport Capacity4-1500g Information No.VAB-13565-02 Year of construction2002 Floor space1,45x0,9 m Total height1,75 m Weight270 kg Extra Specifications boekels checkweigher: Max belt speed: 0,92m/s max weight: 1500g minimum weight: 4g division value: 0,2g conveyor length 1450 mm conveyor height 800 mm, adjustableMiscellaneous transportBoekelsConveying systems > Miscellaneous transportBrand > Boekels What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information.

This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine.

This TIGER UKA 600 Cross cut installation was manufactured in 2015. It features a 600 mm saw blade, a cutting capacity of 165 x 240 mm at 90 degrees, and a motor power of 5.5 Kw. The machine includes a TigerStop 7.5 Automatic Stop and pusher, enhancing precision and efficiency. Ideal for semi-automatic or fully automatic operations, it supports a maximum feed speed of 40 m/min. Contact us for more information about this machine.

CHEVALIER FSG-1640ADIV surface grinding machine was built in 2022 in Taiwan by Falcon Group Co., Ltd. The machine is used for precision grinding of workpieces with a maximum weight of 440 kg. A number of state-of-the-art technical solutions, combined with extensive equipment, make it the best choice for professional production applications. Grinding is performed fully automatically on a large electromagnetic plate or directly on the work table. The work table is hydraulically driven and moves on ground and induction hardened guideways. To achieve the highest machining accuracy and precision, the CHEVALIER FSG 1640 ADIV magnetic surface grinding machine is equipped with dynamic balancing and automatic dressing of the grinding wheel. During grinding wheel dressing, the work table automatically positions itself where the diamond tools are and compensates according to the operator’s  ...

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.

This LINCK VZM & CSMA was manufactured in 2018. It includes a CSMA pull-out device and a VZM centering device, both designed for high-performance in automated production lines. The CSMA offers flexible material guidance with a feed speed of 85 m/min, while the VZM provides precise centering at 84 m/min. Both units feature robust designs for demanding conditions and minimal use, ensuring excellent condition. Contact us for more information about this machine.

This Wehrmann Combima /K/I/R80/1260/V was manufactured in 2018. A robust single-sided throughfeed postforming machine, ideal for shaping wood and wood materials with laminates in caravan construction and furniture parts. Features include a precision roller chain for reliable workpiece transport and motorized top pressure adjustment. A great opportunity to buy this Wehrmann Combima /K/I/R80/1260/V Wood machine. Contact us for further details regarding this Wood machine.

This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine.

This edgebander was manufactured in 2005. It is a single-sided combination machine ideal for formatting, edge gluing, and finishing panel-shaped workpieces made of wood or wood-based materials. Features include an automatic insertion table, NC insertion system, and a 12-compartment edge magazine for roll material up to 3 mm thick. It also boasts a variable feed speed of 5-25 m/min and a PC control ICOS open system. For more information about this edgebander, please reach out to us.

This IMA COMBIMA double-sided edge processing machine was manufactured in 2000. It is a double-sided edge processing unit ideal for industrial furniture production. Features include automatic complete processing of veneer/plastic strips as roll material from 0.4-3 mm and programmable feed speeds between 10 and 40 m/min. Equipped with a BECKHOFF control system and a modern industrial PC with a 21.5 monitor. For more information about this woodworking machine, please reach out to us.

This edge processing line was manufactured in 1996. It features a robust double-sided edge processing line, including a gluing unit with granulate pre-melter and a 6-position roll magazine for edging material. Equipped with both flush and fine milling capabilities, it also includes a profile scraper and a buffing unit. Ideal for longitudinal and transverse processing, the IMA COMBIMA offers comprehensive functionality for advanced woodworking tasks. For more information about this woodworking machine, please reach out to us.

This single sided edge banding machine was manufactured in 2000. It features a robust Beckhoff control system and operates with a mechanical gear motor for precise workpiece transport. The machine handles various edge materials, including veneer, PVC, and solid wood, with capabilities for both coil and strip ware. It supports a maximum edge height of 55 mm and a panel thickness up to 50 mm. Ideal for detailed woodworking tasks, the IMA COMPACT PC-6220 F machine we have for sale. Contact us for more information.

This IMA Combima/II/390/B/L12 was manufactured in 2010. A robust double-sided edgebander, it features a max feed width of 3,300 mm and handles workpiece thicknesses up to 60 mm. Equipped with ICOS OPEN control for precision, it supports both roll and strip edgebanding materials. Ideal for high-capacity environments requiring flexibility and reliability in edge finishing. Contact us for more information about this machine.

spindle diameter: 125 mm x-travel: 2200 mm y-travel: 1700 mm z-travel: 1400 mm spindle travel: 900 mm spindle taper ISO: 50 turning speeds: 6-1000 U/min table surface area: 1120x1800 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This IMA Combima Systems/I/R75/1370 edgebander was manufactured in 2006. It handles workpieces ranging from 250 to 2800 mm in length and 115 to 1300 mm in width, with thicknesses up to 40 mm. Designed for materials like chipboard and MDF, it features a hot melt adhesive applicator and a servo edge feed system. Ideal for high-quality edge banding, consider the opportunity to buy this IMA Combima Systems/I/R75/1370 edgebander. Contact us for more information about this machine.

This CASATI BIG 2600 was manufactured in 1995. It features a double-knife system with both upper and lower knives that trim veneer bundles from both sides simultaneously, ensuring precise cuts. The machine offers a substantial working width with a usable cutting length of 2600 mm, ideal for preparing veneers for furniture and doors. Consider the opportunity to buy this CASATI BIG 2600. Contact us for more information.

This CEFLA ROCTRE W was manufactured in 2007. A fully refurbished edgebander, it offers stable performance and reliability, ready for immediate use. Maintaining the original structures strength, its ideal for those needing a ready-to-run solution without further restoration. Contact us for more information.

This CHENDE CJ480M3V was manufactured in 2007. A hydraulic injection moulding machine featuring a tie bar distance of 800 x 770 mm and an opening stroke of 750 mm. It includes 2 core valves, 3 air valves, and an EU 12 for robot connection. Consider the CHENDE CJ480M3V machine we have for sale. Contact us for more information.

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine.

This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4 touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine.

This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robots joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4, 3/8, and 1/2, including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4, 3/8, ...