128,670 used machines on RESALE, but how to find them? Machine Search
Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 8040 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 387 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/cummins-qsx15-used/42387, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.850 kg, Type number: QSX15 CPL8761
greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm
Cam Automatic Baby Diaper, Sanitary Napkin, Dry Wipes, Wet wipes Packing Machine 300 Automatic wet wipes, dry wipes, Sanitary Napkin Packing Machine- 60ppm CAM-300 Automatic Baby Diaper, Wet wipes, Dry wipes, Sanitary Napkin Packing Machine wet wipes dry wipes pads food pads packing line Main Features ☆ Fully servo driven,Servo motor management by electronic CAM ☆ Modular structure design，Small floor area ☆ Force restrict protection, stable running ☆ Suitable for different direction packing Main component configuration ★ Motion control system：MITSUBISHI/SIEMENS ★ pneumatic：SMC ★ Guide rail, screw rod ： TBI 、TMI ★ Electrical accessories：Schneider Parameter Working speed UP to 600 pieces/min and 60 bags/min Number of pieces per row 10-20pieces/row General dimensions (LxWxH) 6295x1000x2277mm Weight 3522KG Electrical Power consum ...
Sharpening machine Vollmer For circular saw blades Type CHC 25 H Year of manufacture 1985 Automatic sharpening machine for breast, back and free grinding Carbide-tipped circular saw blades Circular saws Outer diameter from 80 mm to 810 mm Bore diameters from 10 mm to 220 mm Blade thickness up to 5 mm Tooth pitch from 7 to 100 mm Rake angle from 6° to 45° Bevel grinding of tooth backs up to 45° Tooth breast up to 15° Grinding speed infinitely variable from 0.5 to 6 mm/s Working speed up to 18 teeth Grinding wheel diameter 125 mm Bore diameter 32 mm Circumferential speed 26 m/s Coolant pump flow rate 40 l/min. Connected load approx. 1.6 kW Areas of application Flat tooth at an angle on one side, left and right Interchangeable tooth, roof tooth, trapezoidal flat tooth, group tooth, Uneven tooth pitch, omitted teeth, format chipper saws Weight approx. 680 ...
Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed
CNC control max. rod Ø: 26 mm Max. speed: 50 - 7,000 1/min 3 Cross-supports 6-station turret Bwjwvu Neyhd Aqsu Ijh IEMCA BOSS 432/32 N Bar Feeder Max. bar length: 3,200 mm
General SKU386W1190 Makechema No.35391 Year of construction2010 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4000 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck Capacity4000 l (4500 l) Vessel sizes1600 x 2500 mm Dished bottomcheck Dished top sidecheck Manholecheck (500 mm) Top connectionscheck With jacketcheck Max. temperature-10/ 100 °C With turbo stirrercheck Motor0.75 kW, 400 V, 1330 rpm Speed mixing shaft130 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information Floorspace2.5 x 2.5 m Total height3.5 m Weight2200 kg ATEX compatiblecheckStainless Steel ReactorsChemaReactors > Stainless Steel ReactorsBrand > Chema What you can expect from Foeth: -- Machine is in w ...
Manufacturer: Essemtec Model: CSM 7000 Plus (without feeder, with nozzle) Find more here - / Contact us at -
pressure: 100 t throat: 250 mm stroke: 400 mm dayligth: 500 mm table surface area: 800 x 500 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: 500 mm ram surface: 800 x 500 mm working feed: 10 mm/sec speed down: 110 mm/sek speed up: 160 mm/sek power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions: 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solut ...
General SKU373X901 MakeZürcher Type25 m² No.2933 Year of construction2014 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell13 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L), Stainless steel 2.4602 (Hastelloy C-22) Heat exchangercheck Verticalcheck Heating surface25 m² Tube capacity300 Ltr. Number of tubes:199 Tube diameter23 mm Tube length1700 mm Max. temperature-30/200°C Shell capacity260 Ltr. Shell diameter500 mm Shell length1900 mm Max. temperature-30/200°C Shell connectionsDN80 Information Floorspace1,10 x 0,80 m Total height1,90 m Weight650 kg CEcheck Extra SpecificationsWithout si ...
General SKU399W1241 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor4 KW Surface1 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface1 m² Capacity1170 ltr Vessel sizesdia. 1200x800mm Plate sizesdia. 1200mm Top connectionsdia. 125mm (1x) dia. 50mm (6x) dia. 25mm (3x) Solids outletdia. 250mm Liquid outletdia. 50mm With jacketcheck (26 ltr) Max. temperature-30/200°C With stirrercheck Motor4.0 kW, 400/690V, 1440 rpm Stirrer speed10 rpm Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) Information Type1 M2 Nutschefilter Mach.No.2016 Year of construction1989 Mounted on framecheck Floorspace2,0x2,0 m Total height3,2m Weight± 3000 kg Extra Specificationsthis machine is delivered with: che ...
General SKU412X1247 MakeCF Scheer & CIE LocationBarneveld TypeSGS 100-E Main Features Motor3 KW Width950 mm Specified Features - Pelletiser Pelletisercheck Rotor width100 mm Rotor diameter80 mm, 200 mm Number of rotor knives1 With roll feedingcheck Motor3 kW 220—240 380—420 V 1420 rpm Rotor speed0—1430 rpm Information No.21058787/8 Year of construction1992 Floorspace1,2 x 1 m Total height1,5 m Weight340 kgPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU422U1341 LocationBarneveld MakeSiebtechnik GmbH TypeConiflux-48-6-6-6 Main Features MaterialStainless steel Surface1.1 m2 Sizes diameter1200 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,1 m² Number of sieve decks:2 Sieve sizesDia. 1200 mm With covercheck InletDia. 200 mm OutletDia. 200 mm Drive excentercheck Motor3,3 kW, 380Volt, 1500 rpm Sieve perforation1.6 mm and 4,8 mm MaterialStainless steel 1.4301 (304) Information No.25751 Year of construction1990 Mounted on stainl. st. framecheck Floor space1,3x1,3 m Total height1,9 m Weight460 kgVibro sievesSiebtechnikSieves > Vibro sievesBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
General SKU427W1351 LocationBarneveld CEcheck MakeGel Detmold Main Features MaterialStainless steel Surface0.28 m2 Sizes diameter600 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0.28 m2 Number of sieve decks:1 Sieve sizesø 600 mm Inlet1050 x1000 mm (bag dump station) Outletø 190 mm Drive vibro motor2 x 0.47 kW Sieve perforation10 x 10 mm MaterialStainless steel 1.4305 (303) Information TypeCAD01-4102 Year of construction2010 Mounted on mild steel framecheck Floor space1,1 x 1,2 m Total height2,2 m Weight800 kg Extra Specifications- with bag dump station on top (dimensions inlet 1050x 1000 mm x 1200 mm) - level sensor in outlet hopper - pneumatic hamer on hopper Vibro sievesGel DetmoldSieves > Vibro sievesBrand > Gel Detmold What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready fo ...
General SKU354T1032 MakeClima Temperatur Systeme TypeC+10/350/S LocationBarneveld CEcheck Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information No.007020 Year of construction2000 Floorspace0,85x1,7 m Total height1,9 m Weight400 kg Extra SpecificationsTemp. range: 10-90 °C Humidity range: 10-95%rF Dew point req. 1: 5-89 °C Dew point req. 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What you can ...
pressure: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
160 kw. a.c.drive, brand A.E.G., year 1995,, professionally reconditioned
Manufacturer: IMA Model: C23 Year of Manufacture: 1994 Machine type:tea packaging machines Power: 6.7 KW Voltage: 395 V Current: 11.2 A Phases: 3 Frequency: 50 Hz Find more here - / Contact us at -
This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information.
Manufacturer: Sturtz Model: HSM - 30 / 40 Compact + Year of Manufacture: 2011 Electrical Specifications: - Input Power / Tension: 400 V 50Hz - Connection / Raccord: 25A - Phase: 3~ / N / Pe - Air Pressure / Service Pressure: 7 bar Find more here - / Contact us at -
amount: 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cone distance min./max.: 0-108 mm Pitch angle min/max: 5°/84° Control: GE Fanuc Series 0-GC Pitch diameter (1:1 ratio): 152 mm pitch diameter (10:1 ratio): 216 mm Diametral pitch (finest/coarsest): 1.3/8.5 Mod. Face width gear wheel max.: 35 mm Knife spindle - Speed range: 41-121 U/min working spindle speed range: 0-33.33 U/min weight: 9025 kg dimensions of the machine ca.: 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.
This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information.
This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine.
This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine.
750 X 750 2 units of brand-new 400-ton machines with 800 strokes, PLC-controlled, with screen and scale
Curing tunnel, 20 cm width 6-unit press, 500 x 500, 6 stations Double-deck press
Sartorius Combics 3 platform scale Stainless, platform scale with ramp, weigh range 1Kg to 300Kgs, platform 1000mm x 1000mm, 1Ph
This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 Ã 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine.
This AMADA CTS-900 sheet metal machine was manufactured in 1997. It features a control system by AMADA and a power capacity of 1.2KVA. Weighing 1100kg, it has been operated for 428283 hours. Maintenance records are available. If you are looking to get high quality sheet metal capabilities consider the AMADA CTS-900 machine we have for sale. Contact us for more information.
Volumetric filling of liquid and viscous foods such as sauces, oils, marinades, dressings or comparable products into suitable containers (e.g. bowls, bags, cans, jars, cups) Basic structure: stainless steel frame with integrated product hopper, filling station with 5 piston cylinders and filling valves, drive unit, control unit. Product funnel: Made of stainless steel, with removable lid. Level sensor for detecting the product level in the tank and automatic replenishment by upstream pumps/containers Parts in contact with the product in stainless steel or food-grade design, easy to disassemble for cleaning. Filling valves optionally fixed or with tracking movement to follow the packaging material movement and enable higher outputs
The Charmilles Robofil 2020 is a high-precision Wire Electrical Discharge Machine (Wire EDM). Manufactured in Switzerland, this machine is designed for detailed "erosion" work, making it a staple in toolmaking and the production of complex medical or industrial components. Here is a clean, structured text block for the Charmilles Robofil 2020 (1994) that you can copy and paste directly into an online listing or equipment database. --------------------------------------------------------------- Machine Specifications: Charmilles Robofil 2020 General Information - Manufacturer: Charmilles Technologies (Switzerland) - Model: Robofil 2020 - Year of Manufacture: 1994 - Machine Type: CNC Wire-Cut Electrical Discharge Machine (Wire EDM) Technical Travel & Capacity - X-Axis Travel: 320 mm (12.5") - Y-Axis Travel: 220 mm (8.6") - Z-Axis Travel: 116 mm (4.5") - U/V Axis Travel: ± 48 mm (fo ...
This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine.
This CMS ESYM M3 1350 was manufactured in 2019. A deburring machine featuring 3 stations, including 1 belt and 2 brush stations, with only 80 operation hours. Ideal for enhancing finishing processes, the CMS ESYM M3 1350 machine we have for sale is a noteworthy addition to any production line. Contact us for more information.
General SKU312X491 LocationBarneveld CEcheck MakePallmann Main Features Motor33 KW Inlet diameter120 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4552 Fine Impact Mills Turbo cone millcheck 2 Driven rotorscheck Rotor sizeInner roter ø 396 mm: outer roter 400 mm With grinding trackConidur 1,5: 2: 3 Housing dimensions ø 800 mm Inletø 120 mm Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm SpeedInner rotor 3000 rpm, outer rotor 1500 rpm Information TypePPS 4-120 No.139820170004 Year of construction2018 Mounted on framecheck Floor space0,9 x 2,8 m Total height1,5 m Weight1600 kgFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...
General SKU283X377 MakeOmve TypeCIP3100 No.180330-1 Year of construction2019 Mounted on legscheck on skid with wheels Main Features MaterialStainless steel Volume200 Ltr. Specified Features - Vertical tank MaterialStainless steel 1.4306 (304L) Closed vertical tankcheck Capacity2x 100 l. Vessel sizes2x ø 600x600 mm With covercheck Dished bottomcheck OutletDN40 With jacketcheck Information LocationBarneveld With switchgearcheck (as is) Floorspace2,00x1,20 m Total height1,70 m Weight603 kg CEcheck Extra SpecificationsWith 2 jacketed vessels, volume: 100 L each. Bedu pump, type MXVL 25-208G, 1.5 kW, 400 V Packo centrifugal pump, type CRP2/32-132/152 AKO pinch valve Heating units Ball cleaning system Mettler-Toledo weighing unit, type M300 (water) Touchscreen control (as is): no key: no control cabinet : Vertical tanksOmve NetherlandTanks > Vertical tanksB ...
General SKU397X1124 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature0 — 200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.5714.02-07 Year of construction2007 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...
General SKU397X1125 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heatingcheck (2,1 kW) Number of doors:1 MaterialHalar coating Information No.559602 Year of construction2000 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra Specifications Halar-coated interior without vacuum pumpDrying ovensElektro-Wärme AachenDryers > Drying ovensBrand > Elektro-Wärme Aachen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...
This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. Worlds first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine.
General SKU379X952 MakeCuccolini LocationBarneveld CEcheck TypeCM 110 M4 Main Features MaterialStainless steel Surface0.2 m2 Sizes diameter500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,2 m² Number of sieve decks:1 Sieve sizesø 500 mm With covercheck Inlet70 mm / 145 mm Outlet80 mm / 100 mm Drive vibro motorcheck Motor0,30 kW (400 V, 1500 rpm) Sieve perforation0,514 mm With ring cleaningcheck With extra sieve decks2x 0,514 mm MaterialStainless steel 1.4301 (304) Information No.160112920 Year of construction2016 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space0,80x0,80 m Total height1,20 mVibro sievesCuccolini ItalySieves > Vibro sievesBrand > Cuccolini Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any des ...
This BOSCHERT Compact 750 Punching machine was manufactured in 2018. It has a table size of 750 mm (X-axis) and 2000 mm (Y-axis) and a punching depth of 750 mm with a maximum punching diameter of 105 mm. This punching machine is equipped with a punching force of up to 40 tons. Maximum cutting thickness for normal steel is at 6mm. It is build in a C-frame construction with appropriate oversizing. The cantilever structure allows for machining of parts larger than the machining space.
General SKU397X1160 MakeBoge LocationBarneveld CEcheck TypeC 15-2-LFR-500 Pressure Pressure buildup10 Bar Main Features Capacity2.25 m3/Min Motor30 KW Pressure10 Bar Specified Features - Blower Blowercheck 2x air compressor Capacity0,52-2,25 m³/min Motor2x 15 kW, 380 V, 3004 rpm Information No.5146436 / 5147193 Year of construction2020 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace2x 2,20 x 0,95 m Total height2,00 m Weight1600 kg Extra Specifications With control unit (as is), 2x Funke heat exchangers, Boge water/oil separator, type CC 10-2, 2x filter unitsBlowersBogeBlowers > BlowersBrand > Boge What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
This 3-axis AGIE Charmilles CUT 20 wire EDM machine was manufactured in 2008. It features a working area of 350mm (X) x 250mm (Y) with a maximum machining height of 220mm in Z. If you are looking to get high-quality EDM capabilities, consider the AGIE Charmilles CUT 20 machine we have for sale. Contact us for more information.
maximum number of results exceeded
please refine your search
