131,091 used machines on RESALE, but how to find them? Machine Search
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible.
Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2100x920x2250 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3200x1000x2300 mm Weight: 630 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1700x2000x2550 mm Weight: 1400 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 720x1000x1900 mm Weight: 300 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Looking for a used Doka concreting platform that’s ready to go, system-compatible, and full of smart features? Then the Framax U concreting platform is the right choice for your project †compact in delivery, fast to assemble, and flexible in use. 🎯 Why it belongs on your jobsite: ⚡ Pre-assembled and craneable †ready for action in just a few simple steps 📐 Compatible with multiple Doka systems: †Framax Xlife †Alu-Framax Xlife †Frameco †Top 50 (with adapter) †FF 20 (with adapter) 🛠 Smart design with deck, guardrail & ladder †all included 💡 Ideal as a used concreting platform for Doka formwork systems 💰 Strong pricing depending on configuration †you choose what fits your budget best 📦 Quickly available & easy to deploy †perfect for project peaks, system extensions or pe ...
You don’t want just any slab formwork. You want a formwork system that accelerates your site ðŸƒâ€â™‚ï¸, simplifies your process ⚙ï¸ and takes pressure off your crew 💪. That’s exactly what Dokadek 30 delivers †fast, flexible, and reliable. This beamless panel floor formwork system features large-format panels, smart assembly logic and minimal components. Formwork from the ground , no beam chaos, no unnecessary complexity †this is what modern site logistics look like. 🚧 ✔ Only two panel sizes †simple and efficient ✔ Slabs up to 30 cm without extra measures ✔ Assembly from ground level †safe and fast ✔ Fully compatible with Dokaflex for maximum flexibility ✔ The ideal choice if you want to buy slab formwork fast â³ Attention: Limited stock available! Ἲ ...
🔧 Stable, ready to use, and exactly what you need on site: 3 used Hünnebeck ID 15 towers , approx. 5.50 m high †including all components and H20 brackets for a safe working platform. 📐 Built for tough jobs: Ideal for beam support, slab formwork or as an add-on system on larger sites. Fits wherever support is needed. 📦 Quick and straightforward: Solid design, easy assembly †no fuss, no extras. just performance where it counts. ✅ Platform included: Equipped with H20 console †you’re safe at the top, no extra parts required. âž• Need more? We’ve got it: Additional used Hünnebeck ID 15 parts are available in stock †perfect for scaling up. â³ Limited availability: These ID 15 tower sets move fast †once theyre gone, theyre gone. 👉 Grab yours now and get the job do ...
💥 Robust. Modular. Easy to handle. Looking for used formwork panels that save you time, stress, and budget? Then this set of Doka Alu Framax Xlife panels (height: 2.70 m) is exactly what you need! 💡 Ideal for wall formwork in high-rise construction, tight spaces, or fast-paced jobsites. ✅ Your benefits at a glance: 🪶 Lightweight & easy to handle †aluminum frame for quick setup, even without a crane 📏 15 cm grid = fewer fillers, clean joints & faster planning 🧹 Easy to clean †powder-coated surface = less effort on site 🔁 Fully compatible with other Doka systems 🚧 Built for professionals who value quality & reusability 📦 Secure your Doka aluminum frame formwork now & kick off your next project smartly! Buying used aluminum formwork has never been this easy. Price: from ...
🚛 Still got 4 loading meters left on your truck? Then don’t miss this Doka Dokamatic table package . 6 units in 2.00x4.00  m †compact, preassembled slab formwork tables that help you save serious time on-site. 👉 Perfect for Dokamatic fans †and everyone who wants to become one. 💸 Not classified = price advantage for pros who know what theyre doing. ✅ Your benefits at a glance: • Lightning-fast forming †can be moved by just one person • Versatile use for changing layouts and room heights • Used Doka system solution †still in great shape • Comes with 21  mm panles already mounted • 1 stack with 6 tables = approx. 4 loading meters †fits most trucks easily 🔧 Looking for accessories? S wivel heads, props & more are available on request. 🟠Limi ...
Model: Heidelberg CD 102-5+LX, - Year: 2001, - Impressions: 279 million, - Control System: CP 2000, - Features: Autoplate, Pull lay control, Rear edge blowers, Alcolor Vario, - Cooling & Peripherals: Technotrans HydroStar, AirStar Pro (Air-cooled), - Wash-up Devices: All automatic wash-up devices (Ink rollers, Blanket, and Impression cylinder), - Sheet Control: Ultrasonic double sheet control, Antistatic device Eltex, Ionizing bar in feeder, Ionizer on delivery, - Delivery & Drying: Extended delivery, Powder Exatronic PLUS, IR Dryer version 2, UV package delivery, - Coating System: Coating unit pan roller system (2 rollers), Varnish supply unit (360l/h), - UV Equipment: 2x UV lamps on delivery by MIKON (installed 2013), - Pre-press: Plate puncher Bacher, Plate bender NEl, Model: Heidelberg CD 102-5+LX, Impressions: 279 million, Control System: CP 2000, Year: 2001
Heidelberg CD 102-6+LX. AGE. 1996, Impr. 301 mil, CPC 1-04, Preset, Autoplate, Alcolor, Technotrans, All wash up devices, Ink temperature control, Air Transfer, Extended delivery, IR Dryer, Coating unit Anilox system, Powder Graphix, Air-cooled
Filling and packaging line for spirits in glass bottles (0.2 L, 0.5 L, 0.7 L, 1.0 L bottles with PP31.5), Pos.1:, 1 piece vacuum filler Seitz Compakta incl. vacuum, Solomaschine with 15 filling valves, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.2:, 1 piece Alcoa aluminum screw cap, Solomaschine mit einem Verschließkopf, Direction of rotation: right-left, Year of manufacture: not specified, Very good condition, Pos.3:, 1 piece TLG cap setter and BEER, Shrink wrap machine – never in operation, Pos.4:, 1 piece bottle handling system including accumulation table, Good condition, Pos.5:, 1 piece labeling machine KOSME for self-adhesive labels, with four bottle disc for abdomen, chest and, Back label, Year of construction: 2007, Very good condition, Pos.6:, 1 piece carton sealing machine Brand: Strapex /Switzerland, Type: Locktape 50, Yea ...
Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine ...
Type CUBE 20 Briquette diameter 30 x 30 mm Press capacity 10-25 kg/hour Briquette length approx. 6-50 mm Hopper volume 0,28 m3 Pump motor input 2,2 kW Power consumption 1,1 kW/hour Required input voltage and current 3x400V, 16 A Oil cooler no Operation continuous Automatic reverse of support wheels no Automatic switching-out no Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 62 dB Transport dimensions 1300-740-1120 mm Weight 233 kg
Rooftop Air Conditioner CLIMAVENETA WSM2-T 0354 106.2 kW Cooling capacity: 106.2 kW / 30.2 tons Year of manufacture: 2022 Options: Air filter, Wika air flow sensor, 2 pcs. Belimo damper actuators. Refrigerant circuit: 2 pcs. Heat exchanger: Copper / Aluminum Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland scroll ZP104KCE-TFD-477 (scroll) Number of fans: 2 pcs. + 4 pcs. (centrifugal, EC-fans) Type of refrigerant: R410A Dimensions: 6.1 х 2.25 х 2.41 m Weight: 1780 kg Working hours: 0/0/0/0 h. Condition: Outlet, New
Photos are examples, not original photos. - Producer Venjakob - Type VEN SPRAY COMFORT - Year of construction 2005 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Dust removing system on infeed conveyor - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 6000 - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - Number of lacquer pumps 2 Stk. - Producer lacquer pump Kremlin - Supply air box - Switch cabinet built into the machine - Voltage / HZ 400 / 50 - Location, on stock
- Producer Cattinair - Type ROTO - G - Year of construction 1998 - Working width 1300 mm - Working height ~ 880 - 910 mm - Operating side, left - Steel belt transport system - Gun control system - Number of installed spraying guns 8 Stk. - Number of lacquer pumps 0 Stk. - Location, not on stock
Trocker in retrofit version and with new Siemes S7-1200 control cabinet with touch panel. - Producer Cefla - Year of construction 1999/2022 - Working width 1.300 mm - Number of pallets 5 Stk. - Palettenlänge 7.470 mm - Useable pallet length 7.200 mm - Max. part height ~ 50 mm - Clearance height between the pallet 60 mm - Max. part length 7.200 mm - Fresh air 3.000 - 9.000 m³/h - Exit air 3.000 - 9.000 m³/h - Heat output ~ 45 kW - Drying temperature 30 Grad (optional 60) Grad - Incl. heat exchanger - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 9.600 mm - Width 3.300 mm - Height 2.650 mm + 900 mm - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - With switch cabinet - Ohne Stellventile und Wasserpumpen
A Cepi flour silo is available. Containers: 2. Container capacity 1: 4000kg, container capacity 2: 4500kg. Including electrical control and weighing hopper. Documentation available. An on-site inspection is possible.
greates pass round over bed: 540 mm swing diameter over face slide: 370 mm centre distance: 3000 mm centre height: 270 mm turning dia. in gap: 815 mm bed width: 344 mm spindle bore: 88 mm spindle diameter in front bearing: 133 mm spindle taper: 11 D1 Camlock turning speed range: 18-1400 U/min turning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mm face feeds: 0,03-0,5 mm metric threading: 0,4-14 mm inch threading: 2-72 G/1 thread - module: 0,3-3,5 mm thread - DP: 8-60 Pitch tailstock quill diameter: 75 mm quill stroke: 230 mm taper of tail spindle: MK 5 slide valve travel: 280 mm upper head travel: 150 mm Overall size: ca. 4700 x 1100 x 1400 mm weight: ca. 3200 kg power capacity: 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rea ...
Article No.: 91256 // S. No.: 91228 Work Surface: 48,3 cm W x 34,3 cm H
Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces
turning diameter: 400 mm turning length: 549 mm control: HEIDENHAIN Eltropilot swing over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm main spindle speed: 25 - 5000 U/min main spindle drive: 21 kW max. torque on the spindle: max. 240 Nm : 120 mm c-axis, speed: 100 U/min C-axis: Haltemoment 200 Nm C-axis resolution: < 0,04 ° sub spindle bore: 56 mm sub spindle speed: 25 - 5000 U/min sub spindle drive: 9 kW max. torque on the spindle: max. 72 Nm : 90 mm c-axis, speed: 100 U/min C-axis: Haltemoment 150 Nm C-axis resolution: < 0,04 ° feed power X/Z axis: 3,5 / 7 Nm rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret: 1 x 12 Stationen number of driven tool stations: 12 speed of driven tools: 4.000 U/min total power requirement: 44 kVA weight of the machine ca.: 5,7 t dimensions of machine L x W x H: 3,65 x 2,03 x 2,1 m Accessorie ...
Pester PEWO-collect packing table, electrical connection 220V/50Hz, drive motor 0.55 kW, working height approx. 930 mm, machine footprint approx. 1300 x 1300 mm (LxW), machine height approx. 1400 mm, machine net weight approx. 220 kg
Technical data, please refer to picture 2
Technical data, please refer to picture 2
Key data: 1047 KW, 1251 kVA, 10000 V
KKK Back Pressure Steam Turbine CFR 5 G5 Electricity generators from 1995, Turbine with AC generator and control system. 1 available. Inlet pressure 8.5 – 15 bar, outlet pressure 0.5 – 3 bar, 1,000 KWel x 1500 rpm, 10 KV/50 Hz. AC Generator: Leroy Somer LSA 52 VLS-4P, 1,251 KVA Manufacturer: KKK Model: CFR 5 G5 Type: Steam Back Pressure Serial number: 4 555 020 Power [KW]: 1047 Pressure inlet [bar]: 8.5 – 15 – Norm: 12 Temperature Input [°C]: 290 – 390 Pressure output [bar]: 0.5 – 3 – Norm: 2 Year of Make: 1995 Dimensions LxWxH [m]: 3.60 x 2.20 x 2.20 AC Generator LSA 52 VLS-4P Manufacturer: LSA Model No.: 52 VLS-4P Type: AC Synchronous Generator Serial Number: 162554-1 Power [KVA]: 1,251 Voltage [V]: 10,000 Frequency [Hz]: 50 Current [A]: 72 Speed [1/min]: 1500 Year of Make: 1995
Size: 310 x 432mm Equipments: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg
- Fully automatic proofing cabinet for trays - Manufacturer: Gram (Bäkoline) - Type: GA 86 CCG L - Cooling, freezing, heating - With support rails - for 60x40cm trays and also 60x80cm trays - Year of construction: 2021 - Refrigerant: R290 - 230 Volt/ 50Hz 1778W - External dimensions: 238x82x106.5cm HxWxD - Interior dimensions: 147.2x67.8x86.5cm HxWxD - Temperature range: -25 °C to +40°C - Cooling capacity: 882W at -25°C - Weight: 178.6 kg
Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined
Size: 0x0 Equipments: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth
grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm workpiece weight: max. 250 kg x-axis: 380 mm z-axis: 1150 mm sanding disc diameter: 400 mm peripheral speed: 20-50 m/sec workpiece spindle stepless: 1 - 650 U/min tailstock quill taper MT: 4 quill stroke: 45 mm dia. of quill: 50 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...
Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...
A tested Miwe Cube Air + Cube Stone in-store baking oven with proofer from 2011 is for sale and immediately available in stock. Miwe Cube Air in-store baking oven for 5 trays (top) - Manufacturer: Miwe - Type: CBA 5.0406 - for 5 trays each 60x40cm - With exhaust hood incl. steam condenser - With fixed water connection - Door hinge on the right - With Miwe FP control - Oven is mobile on castors with parking brake - Electric - 8 kW - 400/230 V- 3/N/PE 50Hz - Year of construction 2011 Miwe Cube Stone Stone Stove (center) - Manufacturer: Miwe - Type: CBS 1.0604 - for 1 tray 60x40cm - 3.4 kW Miwe proofer (bottom) - Manufacturer: Miwe - Type: CBPR750 - With new control panel - Year of manufacture: 2011 - 1.6 kW - 230V - 1/N/PE - 50Hz Outer dimensions approx: Width: 80cm Depth: 81cm Height: 207cm
Screw compressor GA132VSD Atlas Copco. 132 kW 8.5 bar 26.06 m3/min. Inverter integrated.
Brand: Cincinnati Milacron Austria GmbH Type: PHPO 40 Year of manufacturing: 1999 Weight: 6.200 kg
PND CB8 automatic coring and wedging line for Apples Consisting of tank for apple collecting, automatic feeder, cutting station and waste conveyor Capacity 100-120 fruits / min 60-110mm size Machine dimensions 4450mm x 2100mm x 2530mm Power - 4.74 kw Air - 5 bar Consumption 90 NL / Min Wedges 6,8,10,12,14,16
Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004
Key data: 30 , 16 , 4
Screw compressor Weight: approx. 750Kg Volume flow: 4.88 m³ Suction pressure: 1.0 bar Speed: 3000 1/min Motor power: 30 kW
maximum number of results exceeded
please refine your search
