caterpillar 3516 c used for sale

- 4 head drilling machine - with the existing accessories

- 2 head drilling machine - floor model

A Cyklop strapping machine is being sold. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee

turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Control: Mefi Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1335 – 1785 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Slide stroke (Z): 1000 mm Vertical crosshead movement: 800 – 1250 mm Slide dimensions: 180 × 200 mm Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In good condition, under power Find more here - / Contact us at -

RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year.; Gross weight [kg]: 11481; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000

Houno Combi oven Stainless oven, touch screen controls, programmable recipes with timer and temperature controls, seven tray, tray dims 530mm x 320mm, with Brita purity steam unit, mounted on stainless rack, 3Ph

Key data: 20000 KW, 2500 kVA, 10500 V

2X CUMMINS QSV 91G running hours 61000 year 2006

Type: ER600 Serial number: 109 Belt width: 600 mm Belt speed: 1.5 - 15 m/min Filling level: minimal 15 litres Power: 3 x 380V, 50Hz, 0.61kW Dimensions: 1400 x 900 x 1750 mm Weight: 145 kg Fully overhauled, including new controls.

Key data: 3 mm, 1050 mm

Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm

pressure: 40.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 200 mm stroke: 100 mm dayligth: 308 mm ajustment speed: 150 mm/sec working feed: 1-10 mm/sec return speed: 100 mm/sec table width: 100 mm table height: 900 mm control: DNC 60 PS oil volume: 100 l voltage: 400 V total power requirement: 5.5 kW weight of the machine ca.: 2750 kg Equipment: - CNC electro-hydraulic press brake - CYBELEC DNC 60 PS CNC control Swiveling control panel, front left Tool & program library - CNC electro-motorized backgauge (X-axis) X-axis travel = 800 mm 2x manually adjustable backgauge fingers (R+Z axes) Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system A with quick-change clamping Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms (Sliding System) - BOSCH/HOERBI ...

Height=2.31 m, Overall length= 3.62 m, Overall width= 0.82 m, Net weight= 504 kg,

Dimensions (L/W/H): 0x0x0 mm Weight: 1600 kg Total power requirement: 14 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 860x1060x1060 mm Weight: 280 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1400x1750 mm Weight: 1800 kg Total power requirement: 5 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 3200 mm Cutting height: 1600 mm Motor output: 1,3 kW Dimensions (L/W/H): 4000x1500x2000 mm machine weight ab.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2750x1800x2200 mm Weight: 2500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x1400x16502 mm Weight: 1800 kg Total power requirement: 8 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6530x1150x2980 mm Weight: 900 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1600x1400 mm Weight: 750 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1174x644x528 mm Weight: 151 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x650x450 mm Weight: 40 kg Total power requirement: 0,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Freezer, freezer Used machine year of manufacture not visible Stainless steel cladding, for 60/40 trays Convection cooling Temperature range down to -25°C, with digital display with 2 pairs of support rails mobile 230V connection

Reference Num.: 4266 Brand: Ricoh Type: C7200SX Construction year: 2015 Impressions: 5 mio Available: directly Status: In production Location: Deutschland

used oven system / deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 shelves, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood ovens Crosta 3.18.20, each 3 shelves (with pellets), with 1 loading and unloading Wachtel Comfort loader (with Wachtel WinServer), built in 2016, in bakery condition, for self-dismantling, ran perfectly until the end

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

For plastic scraps, in most cases without need to reduce size The offer includes:, STORAGE HORIZONTAL BELT, to grant non-stop feeding, DIAGONAL LOADING BELT, made in sturdy carbon steel with side walls, dragging paddles, PVC carpet, AGGLOMERATOR with barrel Ø1.500 mm.,, length 4300 mm. width 2300 mm. height 5.050 mm. 560 kw , Hp 730 65% used in work Side opening panel for inspection and replacing blades Operator switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam sucking vent 4 kW UNLOADING HOPPER, complete with 200 mm Ø, diagonal auger for agglomerated material 1,5 kW drive., size 1.150 mm. x 2.000 mm. Lower opening for cleaning purposes Operations, upper lid, two inspection windows (one can be o ...

grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU330W711 LocationBarneveld MakeCollette Gral Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor18 KW Specified Features - Universal mixer Universal mixercheck Capacity300 l., (260 l.) Vessel sizesDia. 840x600 mm With covercheck InletDia. 150 mm Pneumatic operated outletcheck OutletDia. 200 mm With jacketcheck With motor18/12 kW, 380 volt, 1465/975 rpm With lump breakercheck With motor7,5 kW, 380 volt, 2930/1460 rpm MaterialStainless steel 1.4306 (304L), Stainless steel 1.4435 (316L) Information Type300 Ex Pro high shear MR103 Mach.No.……. Year of construction1999 Mounted on framecheck Floorspace1,20x2,50 m Total height2,55 Extra SpecificationsHydraulic unit, 15 kW, 380-415 volt, 1420 rpm 2-doors control cabinet Universal mixersColletteMixers > Universal mixersBrand > Collette What you can expect fro ...

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year., Images shown might not reflect actual configuration.; Gross weight [kg]: 7436; Engine: Caterpillar C32; Accessories: Tanker, Control Panel, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000

x-travel: 3.500 mm y-travel: 2.600 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2.300 mm rapid motion - x-axis: 15.000 mm/min rapid traverse: Y,Z 12.000 m/min feed: 5.000 m/min tool taper: ISO 50 number of spindle speeds: 5.000 U/min/rpm milling head -swivable: UAGA 3.000 U/min 45 Grad spindle drive: 22 kW transmission ratio: 2 table weight: 15.000 Kg Tools changer: 30 fach/tools handwheel: HEIDENHAIN HR 410 air pressure: 6 bar total power requirement: 44 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m - Auto Indexing Head 2, 5º /2.5º - Automatic Support in the right side for Head UAGA - Direct Output Head. - Automatic Head Changer - Automatic tools changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cyklop DTM 22 electric tape dispencer - on a trolley - two tape length can be pre-set - cuts and wets the tape automatically - Including +/- 50 reels of 70mm wide tape

Heidelberg SM 74-2 P with CPC 1.04 Age: 2000 Counter: 68.3 million impression Format: 52 x 74 cm Equipment: 2 Color Offset Printing Machine Perfector 2/0 1/1 CPC 1.04 CP-Tronic Autoplate Alcolor Balwin circulation and cooling device Blanket wash up device Inking Unit program controlled wash up device Super Blue jacket transfer drums Powder Grafix Alphatronic 200 With punch and bender

Key data: 10 liter, 8 liter, 1

available 10l tangential mixer Description attached!

Type: BR6000/600 Serial number: 1382 Year of construction: 2001 Belt width: 600 mm Frying length: 6000 mm Heating: thermal oil, 388 kW Oil volume: +/- 1250 litre Frying time: 25 - 250 sec Power: 3 x 415V, 50Hz, 8kW Dimensions: 8950 x 2050 x 3900 mm Weight: 4250 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher

Jenbacher 320 refurbished cylinder heads are available. 18 pcs - Quantity For pricing and information, contact us today to get a quote.

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Dimensions (L/W/H): 600x800x1900 mm Weight: 230 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Ho Chun universal tool milling machine is available. Travel X/Y/Z: 1250mm/540mm/470mm, spindle mount: NT#50, speed: 2000rpm, table spindle nose distance: 50mm-520mm, spindle power: 8kW, feed: 1200mm/min, rapid traverse: 2000mm/min, table dimensions X/Y: 1800mm/400mm, max. table load: 1000kg, machine weight: approx. 3600kg. Documentation available. On-site inspection is possible.

Dimensions (L/W/H): 800x1170x2300 mm Weight: 650 kg Total power requirement: 1,05 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2100x920x2250 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2260x920x2250 mm Weight: 450 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x1000x2300 mm Weight: 630 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.