caterpillar 3516 c used for sale

Engine Brand: CUMMINS, Condition: CORE, Engine Injection Type: DIRECT COMMONRAIL , Engine Aspiration Type: TURBO , Air Cooling Type: LUCHT-LUCHT INTERCOOLER , Bore: 107 mm, Stroke: 124 mm, Engine Capacity: 6700 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 2500 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 194 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/cummins-qsb6-7-cpl8611-cor e/42336, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 550 kg, Type number: QSB6.7 CPL8611

Engine Brand: CUMMINS, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 116 Kw, Rated Speed: 2000 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/cummins-qsb4-5-commonrail- core/42335, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 480 kg, Type number: QSB4.5 CPL3670

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 6405 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 225 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-43557 07-used/42350, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 940 kg, Type number: C7.1 881-4355707

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 205 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c7-1-881-45865 16-used/42338, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.250 kg, Type number: C7.1 881-4586516

Engine Brand: CATERPILLAR, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 10500 Hour(s), Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 317 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c12-bdl-191539 4-core/42322, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.100 kg, Type number: BDL-1915394

Engine Brand: CATERPILLAR, Condition: CORE, Nominal Power @ Nominal Rpm: 328.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Bore: 130 mm, Stroke: 157 mm, Engine Capacity: 12500 cc, Qty Cylinders: 6 Qty, Nominal Rpm @ Nominal Power: 2100 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 14500 Hour(s), Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 350 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c13-lgk-241380 4-core/42308, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.3 ...

Engine Brand: CATERPILLAR, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 60 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3304pc-4b-7n33 03-core/42348, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 740 kg, Type number: 3304PC 4B-7N3303

Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 175.2 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 3045 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 280 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-01z-2w132 0-used/42314, , = More information =, , Type: Engine, Type of fuel: Diesel, Emp ...

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 3302 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 220 Kw, Rated Speed: 1950 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/cummins-nt855-g1-pump-used/58, , = More information =, , Type of fuel: Diesel, Type number: NT855-G1 CPL5820; Transport weight [kg]: 3000

with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10

System Description Partial automated sorting system for returnable beverage crates and EPS foldable trays. Incoming returnable containers arrive mainly on Euro and half pallets and must be manually unloaded due to mixed crate types. Additional quantities arrive in roll containers. Main Functions - Identification and sorting of various returnable crate types - Deposit value calculation per crate based on pallet barcode - Sorting of bottles into 20-unit and 24-unit module crates - Automatic unpacking of EPS trays with bottles using Inlet systems - Handling of up to 440 crate types - Sorting of standing bottles inside EPS trays with Inlets - Allocation of sorted crates for automated palletizing or manual handling Capacity and Performance - Total annual throughput: 6.5 million crates - Operation: 2 shifts per day, 5 days per week - Average throughput: 1,625 crates per hour - Peak throug ...

We offer you a labeling machine from a current recycling. The machine was used to apply adhesive labels from the roll to hangtags (tag labels). Year of Make: 2022 Condition: good Hours: ./. Asking price: 15.000,00 VHB Original price: 35.000,00 Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202 – 25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location:68753 Waghäusel The sale is without warranty Subject to prior sale

in nieuwstaat 2 Atlas Copco Freqentiegeregelde lage druk compressoren Max 4 Bar max 93 Kw 200 bedrijfsuren

Manufacturer: Cofely Model: Quantum II X030 Year of Manufacture: 2015 Type: Industrial refrigeration/chiller system Refrigerant: R134a Refrigerant quantity: 100 kg MAXIMUM OPERATING PRESSURE High pressure (HD): 18.3 bar / 63 °C Low pressure (ND): 18.3 bar / 63 °C OPERATING LIMITS Evaporator - Water side pressure: max. 10 bar - Flow rate: 22.3–53.6 m³/h - Outlet temperature: 3–20 °C - Inlet temperature: 7–25 °C Condenser - Water side pressure: max. 10 bar - Flow rate: 28.6–68.5 m³/h - Outlet temperature: 20–56 °C - Inlet temperature: 15–52 °C MAIN COMPONENTS Turbo Compressors - Model: TT300-H6-1-ST-E-O-CE - Cooling capacity: 300 kW - Power consumption: 2 × 51 kW - Max. current per compressor: 140 A - Voltage: 400 V - Frequency: 50 Hz - Manufacturer: Turbocor Inc. Evaporator - Model: VRMH46.60.180.4 - Evaporating temperature: 9 °C - Volume flow chill ...

Manufacturer: Mitutoyo Model: CRYSTA-APEX S544 Year of Manufacture : 2019 Type of Machine : 3D CNC Coordinate Measuring Machine Measuring range : 500 × 400 × 400 mm Resolution: - 0.0005 mm Drive: - CNC control, servo motor drive Maximum Drive Speed: - 3-axis simultaneous: 20–30 mm/s (depending on model) Accuracy (per ISO 10360-2): Probe used: TP200 - E0, MPE: Approx. 1.7–2.2 µm (varies by model and temperature) Machine Weight: - S544: approx. 1135 kg Power Supply: - 100–240 V AC, 50/60 Hz Find more here - / Contact us at -

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3560 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 701 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/stock/diesel-engines/cummins-qst30-used/42339, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 3.980 kg, Type number: QST30 CPL2968

G&J C85, Clean Out Unit

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 851; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE33GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 50

- Noise Rating: 67.2 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / EU Tier IV final; Power [PS]: 337; Gross weight [kg]: 4784; Engine: Cat C9.3B; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x125A; Water Tank Volume [l]: 667

- Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 22; Gross weight [kg]: 815; Engine: Cat C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, - Sockets: 2x16A, 2x 32A, , - Option for 24H tank as in 2nd picture.; Water Tank Volume [l]: 56

- Noise Rating: 64.6 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 218; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822

- Noise Rating: 65.9 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Power [PS]: 125; Gross weight [kg]: 2527; Engine: Cat 4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A; Water Tank Volume [l]: 518

grinding diameter: 762 mm grinding length: 5500 mm centre height: mm workpiece weight: 10000 kg grinding wheel size: 762 x 76 x 304,8 mm grinding wheel turining speeds: 1 -750 U/min turning speed range - workpiece: 14,5 - 86 U/min main drive motor: 14,8 kW workpiece drive: 5,5 - 7,35 kW grinding head infeeding speed: 0,00635 - 0,0508 mm/min table speeds: 101 - 2021 mm/min total power requirement: ca 25 kW weight of the machine ca.: 27 t dimensions of the machine ca.: 13,5 x 3,35 m Machine complete with: - 9 x steadies. - Coolant/Filtration Tank. Machine has had over 80.000€ of engineering maintenance work/overhauling in 2023 including replacement of air bearing liners. 7 x steadies fully overhauled. Overhaul of top table & centre heights of workhead & tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 70 mm screw length:: 22D screw speedl:: -- U/min Condition: used Specification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling Bath Consisting of: Extruder COLMEC 70 x 22D - Screw diameter: 70 mm - Screw length approx.: 22D - Extruder motor power: 37 kW - Cooling unit for extruder Hot air oven: - Hot air oven power: 80 kW - Fan power: 2x 0.36 kW, 2x 1.5 kW - Stainless steel cooling bath The system is in good condition and was still in operation until approx. 6 months ago - Sold as seen. The buyer is responsible for safety regulations. Without CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Table size: 1100 x 900 Flywheel size: Ø 900 Saw blade: min. 6200 - max. 6400 mm Installed power: 5 HP

Complete used NH3 (Ammonia) freezer installation for freezing carton boxes. This set includes a Grasso RC 6311 two-stage reciprocating compressor. The freezer has the following capacities: - Capacity 15T/24H at -24° C - Carton box weight 12-15 kg/each - Capacity 2.000 box/24h - In/output 80/90 box an hour Please feel free to contact us for more information!

Vertongen M-300 Combi Through Grinder Working width 300mm Working height up to 200mm Combi unit with boot Pneumatic Oscillation Manual lifting and lowering of the workbench Two feed speeds 5.5kw main motor Sandpaper 300x1900mm Weight about 600kg

YORK chiller type YLCC-H 102V In good condition Cooling capacity : 96,1 KW Nominal power :19,1 KW (x2) Power : 400 V - 3,5 Hz R407C Weight. : 1 133 kg

Costo push-off for conveyor systems Manufacturer: Costo Type: Pusher Pusher Application: Conveyor Systems Drive: SEW Spur Gear Motor RF27 DRS71S4BE05HR Voltage at 50 Hz: 220 ... 242 Δ / 380 ... 420 V Y 0.37 kW 1380 rpm Scope of delivery: 1 pusher The pusher pushes the goods onto another belt or roller conveyor for further transport or processing. Shipping via forwarding agent possible, please contact us. Other conveyor systems, roller conveyors, belt conveyors and roller conveyors - can be found in our shop! International shipping costs on request!

Manufacturer: Linsinger Type of Machine : CNC Saw Find more here - / Contact us at -

Haco TSX 3100 x 6 mm CNC Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 8 > 14 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7,5 kW Length: 3880 mm Depth: 1650 mm Height: 1700 mm Weight: 4,5 ton Number of sheet holders: 18x

turning diameter: --- mm turning length: --- mm control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm Power needed: 25 HP Weight: 19 ton

Type: 108675-001 Year of construction: 2012 Outlets: 3 x 2 pcs Pitch width: 290 mm Pitch length: 185 mm Diameter pipe: 30 mm Compressed air: 6 - 8Bar Power: 3 x 400V, 1.3A Dimensions: 780 x 1050 x 550 mm Including tool trolley Used for dosing liquids in top of thermoformer With Hovmand A/S lifting trolley Type: INOX 200M-Leg 2 Serial number: 13475 Year of construction: 2016 Lifting weight: max 200 kg Lifting height: max 1750 mm

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made  ...

faceplate diameter: 800 mm swing diameter: 1050 mm turning height: 755 mm control: Siemens 840D travel -x axis: 625 / 80 mm travel -z axis: 630 mm workpiece height max.: 720 mm max. workpiece weight: 2500 kg Shank diameter: 40 x 40 mm transmission ratio 1: 4 - 100 U/min transmission ratio 2: 16 - 400 U/min drive capacity - spindle motor: 40 kW rapid traverse: 8 m/min turning speed range - milling: 1 = 8,5 - 350 U/min : 2 = 26 - 1070 U/min : 3 = 80 - 3312 U/min total power requirement: 53 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 4,9 x 4,4 x 4,5 m equipped with: - CNC control Siemens 840D - C-axis - tool changer 12-fold (driven tools) - complete enclosure - chip conveyor - coolant system only approx. 800h running hours per year The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible.

Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.

Size: Equipments: Allows you to cover covers of max. A3 + format. The machine is equipped with work table illumination, cutter guillotine, edge folding module, vacum table Max. Area (W x D) 750 × 476 mm. Max. bending length 750 mm. Max. dimensions of finished cover (closed) 352 × 455 (back) x20 mm. Thickness of cardboard cover 8 mm Voltage 220-240 V. Dimensions of the machine (W x D x H) 1000 x 780 × 210 mm Weight 43 kg

A fully overhauled automatic welding station Cloos from the year 2025 is available. Robot type: Romat 320, welding power source: GLC 353 MC3 R, control system: Rotrol II fibre optic, welding process: MIG. Load capacity: 15kg, robot axes: 6, reach: 3200mm, repeatability: +/-0.1mm, power: 25kVA, total weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A completely overhauled automatic welding station Cloos from the year 2025 including two rotary tables is available. Robot type: Romat 350, welding source: GL 300 IHPR, control system: Rotrol II, welding process: TIG. Rotary table load capacity: 2x250kg, rotary table type: WPEK-DP-KP-2.5kN, axes: 6+2+2. Documentation vorhanden. An on-site inspection is possible.

Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible.

Offered is a high-voltage switchgear device ZK8 System Calor Emag from Peters & Thieding. Year of construction 1994, standard series VDE 0670 (IEC 62271), rated voltage 24.2kV, insulation level 50/125kV, rated frequency 50Hz, operating current 630A, short-time withstand current 20kA, short-circuit duration 1s. Viewing is possible by arrangement.

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

DETAILED EQUIPMENT LIST (FULL PACKAGE) (A) Earthmoving, Excavation & Grading • 6 × Wheel Loaders LW500KN • 4 × Excavators CAT 326DL • 6 × Excavators CAT 323DL • 6 × Bulldozers ZD220-3 • 7 × Graders CAT 140K • 1 × Grader G9190 (B) Asphalt Production Line (Primary Plant Package) Asphalt Mixing Plant DQ4000 (Main Unit) – includes: • Bitumen pumps & pipelines • Fuel storage tanks & burners (diesel & heavy oil compatible) • Aggregate storage bins / cold feeders • Drying drum with burner • Bag-house dust collection system • Hot elevator & screening systems • Hot bins • Mixing tower with pug-mill • Control cabin (computerized) • Weighing systems • Bitumen emulsion plant (optional) • Filler silos & feeding system • Asphalt storage silos with discharge system • Spare parts package (critical wear items) • Road pavers & comp ...

Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO 091 26-110-100 year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/f ...

General SKU392W1205 MakeSGL Carbon LocationBarneveld CEcheck TypeRS 77-1-295.40.1 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Mild steel Tube (Material)Diabon Surface100 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon, Mild steel Heat exchangercheck Verticalcheck Notified bodyTUV Heating surface100m² Tube capacity800 l Max. temperature200°C Shell capacity980 l Shell diameter814 mm Max. temperature170°C Shell connectionsDN250 Cover connectionsDN300 Information No.41038060/1 Year of construction2015 Floorspace1,7x1,7 m Total height5,8 m Weight3600 kgShell and tube heat exchangersSGL CarbonHeat exchangers > Shell and tube heat exchangersBrand > SGL Carbon What you can expect from Foeth: -- Machine is in working condition -- A ...

Boring mill Manufacturer: TOS Type: WHQ 13.8 CNC Year of Make: 2000 CNC control: Heidenhain iTNC 530 Completely overhauled in 2022 Report available Travel: X/Y/Z: 3,500 x 2,500 x 1,250 mm Table length: 2,200 mm Table width: 1,800 mm Max. workpiece weight: 1,200 kg Spindle Ø: 130 mm Spindle speed max.: 3,000 rpm Spindle motor power: 37 kW Dimensions: LxWxH approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons.