caterpillar 3516 c used for sale

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller � ...

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

Cincinnati Titan92-APC Tapered Twin Screw Extruder Year of Make: 1996 incl. volumetric dosing unit for masterbatch Wittmann Dosimax Manual screen changer BD Plast Installed between extruder adapter and pelletizing head Alternatively available: Gneuss Screen Changer Granulating head Cincinnati GK120 works in the hot knock-off method including adapter and funnel Circular vibrating screen IFE US 400 x 1000 FV – LM445T Year of manufacture: 2018 for the separation of particles that are not bound in the granules with particle size < 1.8 mm Vertical granule cooler Knorr GK-600-PVC Year of manufacture: 2018 Cooling volume: approx. 190 litres Mounted on a walk-on steel platform incl. cyclone separator, complete supply and outlet pipes and blower Big-Bag Filling Station incl. material transport and material weighing SBB weighing technology Condition: fully functio ...

PRIMULTINI log bandsaw line, type SIB-1600-CFK-IFB, Consisting of:, PRIMULTINI hydraulic log carriage, type CFK, - undependable headblock movement, - 5 pc hydraulic headblocks, - Opening headblocks horizontal 1000 mm, - Each headblocks with brushless motor for movement, - Distance between headblocks 1400 – 1750 – 2000 – 3350 mm, - Length log carriage ca. 10,5 meters, - Each headridge with double hydraulic centering pad, - Integrated log turners, PRIMULTINI hydraulic driven rope feeding, type IFB, With separate motor, with 55 kW power, with rails, total length 30 meters, SWECAN chipper canter machine, Motor power 75 kW, Control cabin with MUDATA touch screen controller, RIMULTINI band saw machine, type SIB 1600, - Diameter flywheels 1600 mm, - Width of flywheels 245 mm, - Maximum sawblade 260 mm, - Saw blade protection, - Blade guide with hydraulic pressure, - Electric adjustment bl ...

Orginal prechamber spark plug 1245-3556 For variable MWM TCG2020 v12/v16/v20 & Caterpillar CG170 -v12/v16/v20 engines. Natural gas 5pcs new

For sale is a semi-automatic cup filling system for drinking yoghurt, ayran or similar. Key data on the plant: - Semi-automatic, i.e. the cup must be inserted and the button pressed for each filling. - Lid diameter: 75 mm - Capacity: Up to 300 ml - Power consumption: 1 kW (230 V plug) - Pneumatic: Compressor required. If you are interested, our compressor can also be purchased. (Please inquire separately!) - Pipe connection DN 32 (direct connection to tank possible, so that the liquid can be sucked off the system with a slope - Country of manufacture: Turkey - Thermal sealing: temperature adjustable. Aluminum lids (75 mm) were used with this system. - Magazine for sealing board available. These are placed on the cup by the system itself - Filling capacity: Variable depending on the filling quantity: 250 ml were filled with this system. Here, about 600 cups/hour were possible.  ...

Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours

Second Hand Atlas Copco GA110VSDFF 110 kW at 8.30 bar and 21.60 m3/min. Built in 2018 with around 29,000 hours. Frequency-controlled and integrated dryer.

Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours

Second Hand Atlas Copco GA400W (water-cooled) 400 kW, 8.5 bar at 66.60 m3/min. Year of construction 2009

Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.

Second Hand Kaeser CSD105SFC. 55 kW with 12 bar and 8.79 m3/min. Built in 2018 with around 24,000 hours. Frequency-controlled. Compactor stage new in 2021. With WRG.

Tribloc Cime Careddu DPS 12/12/1 with 12 rinser stations pressure filler with 12 filling valves and 1 head crowner capacity: approx. 2.500 bph isobaric, with vacuum pump pre-evacuation with height adjustment fixed for 330 ml, 500 ml, 750 ml bottles

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total we ...

Reference Num.: 4099 Brand: Heidelberg Type: KS Cylinder 38x52 Construction year: 1960 Size: 38 x 52 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 38 x 52 mm Total weight: kg 3,500 / lbs 7,716

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...

x-travel: 4500 mm y-travel: 3800 mm z-travel: 1850 mm column daylight: Z = 1900 mm column daylight: Y = 5330 mm table surface area: 4500 x 4600 mm table load: 50 t milling head speed: 40 - 2000 U/min feeds x/y/z -stepless: 6 - 4000 mm/min rapid travel x/y/z: 6000 mm/min milling drive: 40 kW milling spindle diameter in the forward pos.: 160 mm tool taper: Steilk. 60 milling spindle quill diameter: 260 Control: Siemens 840D total power requirement: ca. 60 kW weight of the machine ca.: 115 t dimensions of the machine ca.: 10,0 x 5,0 x 5,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production Year 2015, start use in end of 2015. Used for two Year. Was used with 75kW electric motor. Now it is without motor. Can be used with some diesel motor. Have spare knives. Can input up to 42cm diameter log

Printing technology: FDM, printing material: ABS filament, material capacity: approx. 700cc, build volume dimensions X/Y/Z: 203mm/203mm/152mm, input format: STL. Includes printed parts and material bags. Documentation available. An on-site inspection is possible.

The vibration screen ASCO VS COMPACT is a robust, semi-mobile screening machine designed for high-performance material separation in recycling, construction, agriculture, and gardening. Equipped with two powerful vibration motors, it handles soil, gravel, wood chips, waste, chip bundles, and more with efficiency and reliability. Its compact, foldable design saves space and allows flexible use, while modular expansion options make it adaptable to different site requirements. The system can operate with one or two decks, separating materials into up to three fractions and can be expanded with modular conveyor belts and a funnel plate. The screen angle is adjustable for precise adaptation to various materials, and the unit is compatible with 400V connections. Quick-change screens work with perforated sheets, screen grids, or bar sizers to suit diverse tasks. The VS COMPACT combines  ...

The ASCO VS Compact One Deck vibration screen is designed to handle diverse screening tasks efficiently, making it an excellent choice for recycling companies and businesses in construction, agriculture, and landscaping. Equipped with two powerful vibration motors, it ensures high screening performance and optimal material separation for soil, gravel, wood chips, waste, and other materials common in the recycling and building materials industry. Its semi-mobile design with a foldable construction saves space and makes transport and setup simple, while the modular system allows quick expansion to meet changing operational needs. Users benefit from adjustable screening technology, with a variable screen angle for precise adaptation to different materials and compatibility with a standard 230V power connection. Screen decks are easy to change and support various screen meshes and perf ...

Key data: 400 mm

What is sold is a Machine name: Automatic band saw Manufacturer: Bomar Model: CLS 800.400 Year of construction: 2017 Condition: defective relay Dimensions: 3850 x 1650 x 2250 mm Weight: 2800 kg A relay on the machine is defective and can be replaced if desired.

Type: TRC1000/600 Serial number: 2661 Year of construction: 2011 Belt width: 600 mm Transport length: 1000 mm Belt speed: 2.5 - 25 m/min Power: 3 x 400V, 50Hz, 0.37kW Dimensions: 1000 x 1000 x 1450 mm Weight: 120 kg

Lathe Hempel Semi-automatic stencil lathe Hempel Type: CH 4 Turning length 400 mm max. turning diameter 100 mm Spindle motor 4 kW, 2800 rpm. Hydraulic pump motor 0.85 kW Infinitely adjustable hydraulic feed Automatic workflow – clamping the scantlings, forwarding and rewinding the front support with the turning steels, finishing turning through the forming steels on the rear supports and clamping the finished turned part Weight approx. 725 kg

Production: KOJA Year of manufacture: 1990 Power: 200kW, 370A RPM: 1485 rpm Air delivery: approx. 100,000 m3/hour Suction side: diameter 800mm Pressing side: 800 x 620mm Impeller diameter: 1800mm Housing dimensions: 3400x3100x2400 Net weight with engine: approx. 4.5t Aerodynamic control with inlet guide vane, grease-lubricated anti-friction bearings. The machine can be disassembled and transported with a standard truck.

OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse

in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Type: FLC8000/600 Serial number: 371 Year of construction: 2004 Belt width: 600 mm Cooking length: 7000 mm Heating: thermal oil, 180kW Steam: 4 - 8 Bar Cooking time: 2 - 40 min Compressed air: 6 - 10 Bar Power: 3 x 415V, 50Hz, 13kW Dimensions: 9800 x 2000 x 3150 mm Weight: 5850 kg With extra infeed conveyor of 1800 mm Including CIP tank and Bartec hygrophil Switchcabinet separate, not connected to the machine With optional outfeed conveyor of 1500 mm

Type: EFR3000/650E Serial number: 1917 Year of construction: 2013 Belt width: 650 mm Frying length: 3000 mm Heating: electric, 90kW Frying time: 25 - 250 sec Power: 3 x 400V, 50Hz, 99kW Dimensions: 6100 x 2350 x 3000 mm Weight: 2750 kg Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher

Vacuum filler bloc BERTOLASO COBERT with 48 filling valves blocked with 8head screw Closermachine, aluminium work direction: right to left year of manufacturing: 1995, with safety housing Siemens S 7 control system CIP able central valve adjustment fixed for one bottle size technical inspected and ready to work

A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible.

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production li ...

Right-angle gears, as good as new

Type: WTC600 Belt width: 600 mm Power: 3 x 400V, 50Hz, 0.7kW Dimensions: 1950 x 1200 x 1750 mm Weight: 185 kg CFS batter filter Type: BTF Serial number: 94 Year of construction: 2002 Power: 3 x 400V, 50Hz, 0.12kW Weight: 50 kg

Type: SE 200 Serial number: 12338 Year of construction: 1999 Bowl: 320 litres, max 200 kg Mixing: 2 speeds Power: 3 x 380V, 50Hz, 12kW Dimensions: 1800 x 1400 x 2150 mm Weight: 1350 kg With movable mixing bowl and temperature indicator

drying oven, tempering oven Caltherm 150 C Fgsbmafjvpagdevpxjf For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 95cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-150 Celsius

A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible.

A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible.

From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...

Right-angle gears, as good as new

Used pastry line RONDO, type: Smartline + Compactline - Satellite head at the front -Role -Calibrator - Compactline - Total length: 15 meters Visits and test runs are possible by arrangement.

faceplate diameter: 3000 mm swing diameter: 3300 mm turning height: 3000 mm horizontal travel of side carriages: 1000 mm distance face plate/tool carrier: 2300 mm vertical adjustment of the crossrail: 2100 mm workpiece weight: 18 t main drive: ca 55 kW ram swivable +/-: 35 ° milling spindle - taper: ISO 50 working feed: 0,05 - 5 mm/U faceplate turning speed range -stepless-: 1,02 - 92 U/min Control: Siemens 840D dimensions of the machine ca.: 5,6 x 5,3 x 5,4 m weight of the machine ca.: 48 t Machine is converted/modernized to CNC control in 2005: - CNC control Siemens 840D - Heidenhain scales and encoder - 2 vertical rams The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m optionally with plate field The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally refurbished in 2020 Fill capa ...

Pressure filler Ortmann + Herbst/Crown Simplimatic 100/15/15 with 100 filling valves, 15head crown corker and 15head Zalkin aluminium cap screw capper with Pick and Place System model: Hansa M year of construction: 1999 running direction: left - right pitch: 113 mm with double pre-evacuation capacity: up to 40,000 bph by 250 ml mineral water bottles up to 30,000 bph by 330 ml beer glass bottles electrics: Siemens S7 with touch panel with safety cladding

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request

The TRE PAK DIM Cap Applicator is a specialized piece of equipment used in the packaging industry for applying caps to various types of containers. Here are some of its key functions and features:, - Automated Cap Application: The DIM Cap Applicator automates the capping process, ensuring that caps are applied quickly and uniformly across a production line. This reduces labor costs and increases efficiency., - Versatility: This machine can handle a variety of cap styles and container shapes, making it suitable for different product lines in food, beverage, pharmaceutical, and cosmetic industries., - Precision Control: The applicator is designed to apply caps with accurate torque settings, which ensures that caps are not over-tightened (which can lead to damage) or under-tightened (which can result in leaks)., - Integration Capability: The DIM Cap Applicator can be seamlessly integrated i ...

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: brown Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 4,900 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.