caterpillar 3516 c used for sale

Manual hand unit: Nein J/N Automatic for single pieces: Ja J/N Automatic for frames: Nein J/N Clip set 351 on the loose item ------------------------------------ Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow -------------------------------------- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm -------------------------------------- Total price of the machine ex works: on request! Frei ...

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m

Basic machine complete with: - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

description: The Checkmat with DART software system is a control unit that can be used for different tasks: fill height inspection, label inspection unit, bar code scanner, dating control, bottle seal control, control of the closure logo, return air tube recognition (foreign body), filling and closing organ management, diversion control, discharge Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning big ...

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8262 Type: PR 99-20 Producer: Cobalm Created: 2011 Parameters: Axis X: 3400 mm Axis Y: 1900 mm Axis Z: 280 mm Cutting thickness: 200 mm

Uhlmann UPS3ET/C130 blister packing & cartoning line for ampoules, etc. comprising UPS3ET blister machine with ampoule feeder, blister size max. 220 x 196 mm (in web travel direction x across web), index length max. 222 mm, forming depth max. 28 mm, reel diameter forming foil 400 mm (on machine) and 700 mm (on unwinding stand), reel diameter lid foil max. 300 mm, thickness of forming foil 0,1 bis 0,5 mm, web width forming foil 115 to 244 mm, web width lid foil 105 to 244 mm, reel core diameter 70/76 mm, Siemens SIMAT S7 PLC, electrics 400V/50Hz, connected load 19kW, compressed air 6-8 bar, machine net weight approx. 4800 kg, capacity 15 to 40 cycles/min., transfer of the blister in-line directly into Uhlmann C-130 horizontal cartoning machine for blisters with blister fedeer suitable for blisters containing ampoules, etc., format range carton min. 30 x 15 x 70 mm, max. 100 x 85 x 150 mm, ...

Camwheat Universal Pie machine 2009, Rotary pie machine, eight station, 95mm diameter pies, adjustable temperature controls, up to 1800 per hour, 3Ph

Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...

Fully automatic wrap-around labeler for approx. 25 - 30 cycles / min. depending on label length and label - as well as carrier material Container diameter max. 110mm

Nachi - Fujikoshi Corp Robotic Manipulator, FD -MC10L Six-axis robotic manipulator Nachi Nachi - Fujikoshi Corp (2015) Confessions: Item Description, Parameters Quantity Robotic Manipulator, FD-MC10L 1 pc ∼ Six-axis robotic manipulator nachi ∼ Max. Reach Radius 2019 mm at p-Point ∼ Repeatable Position Accuracy ± 0.06 mm ∼ Wrist Load Capacity 10KG ∼ Arm Load Capacity in the 3rd Axis Location 15kg Absolute Position Readout ∼ High Dynamics of Movements and Arm Rigidity ∼ Protection of the Wrist of the Robot Robot IP65 Control System, nachi FD11 Control Unit of Six-Axis Manipulators nachi ∼ Modular Construction ∼ ∼ ∼ Windows System Kits ∼ Application SW FOR PROGRAMMING MOTIONS FD CONTROL ∼ Built-in PLC module for peripherals ∼ Programming module teach pendant ∼ 15m ∼ JogDial Controller ∼ Ethernet Spread for network connections ∼ FTP client for data bac ...

Fully automatic wrap-around labeler for approx. 25 - 30 cycles / min. depending on label length and label - as well as carrier material Container diameter max. 110mm

Fully automatic bottle display with format star for e-liquid bottles, output approx. 30-40 cycles / min.

Fully automatic lid labeller for approx. 30 - 35 cycles / min. depending on label length and label - as well as carrier material Specially designed for hazard labels

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, pistons, main shaft, oil pan, oil pump and all bolts.

Deck Oven Electric Oven Miwe Condo Model: Type: CO.5.1208 AS control Bottom heat and top heat can be controlled individually 5 baking shelves 1200 x 800 bottom 3 stoves with steam Chassis mobile with brake Connection 400V, 5 x 9 kW, 5 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven

Toothed Disc Mill CONDUX V3 5.5 kW adjustable 210 - 1577rpm V-belt drive (2x SPA 150-3), Overhauled, re-stored and sealed

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Manufacturer: Cefla, Type: Spaybotic, Year: 2003, Control: cefla, Spraying line: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4500, Min.-max. workpiece height in mm: 10-100, Working widht max mm: 1400, Spraying machine: 1, Spraying heads - total: 4, Farbmanagment: yes, work piece detection: yes, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer system - airless: 2, Laquer system - airmix: 2, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Year :2003

Manufacturer: SEW Mowiedrive Compact MDX60A0110-503-4-00, Type: MDX60A0110-503-4-00, Sale without warranty: 16,8 KVA, No right of return: 0-180 Hz, Installation height: 24 Ampere,

Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010

Manufacturer: Bürkle doppelseitige Struktur und Reinigungsbürste, Type: CGM 800, Year: 1984, Control: no, Monting of the machine: 2 X Anderlon 250 mm<CRLF>2 X Fibre, Number of units: 4, Engine power - kW: ca.7,5 über Getriebe Anderlonbürsten<CRLF>2 X 2,2 Kw Reinigungsbürsten, Diameter of brushes: 250 mm / 150, Number of rotations controlled: Struckturbürste, Working width mm: 950, Through running hight mm: 120, Struckturieraggregat: 2, Feeding speed continous adjustable: über Umrichter möglich, Year :1984

Manufacturer: Fischer Rückle, Type: Cut Master, Year: 2007, Control: Fischer Rückel, Cross cutting guillotine: Qeurschneidanlage und Verbindungsmaschine, Cutting lenght mm: 250-2800, Working hight mm: ca.1,5, Digital readout lineal guide: yes, FREE TEXT: verlleimung über Fadensystem, Year :2007

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Wandress, Type: CH 29M/1650<CRLF>BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Tesa SA Vermessungtisch, Type: Messfeld 560 X 750 X 410 MM<CRLF>, FREETEXT1: Rechner und Steuerung sind vorhanden, FREETEXT2: Anlage wird vor <CRLF>Verkauf auf Funtion geprüft,

Manufacturer: Commander Frequenzumrichter, Type: SE 23400150 SE T 2,5, Serial number: 3781643037, FREE TEXT: kw 1,5, Free text 1: 0-1000 Hz, Free text 2: 6,4-4,2 Ampere,

Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999

Manufacturer: KEB, Type: Combivert, Model: 10.56., Hz: 50/60Hz, Output DC Volt: 380/415 V, Output PpK= kW: 2,2 kW,

Manufacturer: Tranpporband <CRLF>Abdeckung, FREETEXT1: Länge 2580 mm, FREETEXT2: breite, FREETEXT3: Breite 1580 mm, FREETEXT4: Durchlasshöhe 100 mm,

Manufacturer: Homag, Type: Konvertierungskarte CPU/30/E16 4 x RS, Serial number: 4-086-05-0241, Year: 19.10.1994 K.kraft, Year :19.10.1994 K.kraft

Manufacturer: Commander SE, Type: SE 23400220, Model: SE 3,5 T, Serial number: 2083802671, Frequency converter: yes, mH/Hz: 0-1000, FREE TEXT: 380-480 Volt, Free text 1: 2,2 kw, Free text 2: 9,0-5,0 Ampere,

Manufacturer: Commander SE, Type: SE 23400400 SE 5,5 T, Serial number: 2083802671, FREE TEXT: 4 kw, Free text 1: 50-60 Hz, Free text 2: 0-1000 Hz, Free text 3: 14-9,5,

Manufacturer: Cefla, Type: Rotostain, Year: 2005, Control: yes, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Pistolenantrieb: 16, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Commander SE, Model: SE 2,5 T, Serial number: 3781643041, Frequency converter: yes, FREE TEXT: Ampere 6,4-4,2, Free text 1: kw 1,5,

Manufacturer: Bürkle, Type: Chromwalze für SLC 1300 174 D/1416 mm länge, FREETEXT1: Länge 1416 mm, FREETEXT2: Durchmesser 174 mm,

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

Manufacturer: Purete, Type: PRT-C4106, Year: neu, Working length mm: 1.000, Working widht mm: 620, Engine power kW: 0,4, Total power kW: 0,4, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 65, Rollenmittenabstand: 200, Wellendurchmesser: 12, angetrieben über Kette: yes, Year :neu

Manufacturer: Purtete, Type: PRT-C4606, Year: neu, Working length mm: 6.000, Working widht mm: 620, Engine power kW: 0,75, Total power kW: 0,75, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 65, Rollenmittenabstand: 200, Wellendurchmesser: 12, angetrieben über Kette: yes, Year :neu

Manufacturer: KEB Homag Umrichter, Type: Combivert, Model: 09.F0.R11-3429, Serial number: 93410337/021161, FREE TEXT: AC-MOT 1,5 kw, Free text 1: 2/4 P, Free text 2: 50-60 Hz, Free text 3: 2,8 Kva,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H<CRLF>9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Manufacturer: Purete, Type: PRT-C4513, Year: neu, Working length mm: 5.000, Working widht mm: 1.320, Engine power kW: 0,4, Total power kW: 0,4, Feeding speed min-max m/min: 5 - 25, Durchmesser Rolle mm: 80, Rollenmittenabstand: 140, Wellendurchmesser: 80, angetrieben über Kette: yes, Year :neu