132,781 used machines on RESALE, but how to find them? Machine Search
Engine Brand: CNH IVECO, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/218701, , = More information =, , Type: Engine, Type number: 667TA/EBA; Transport weight [kg]: 540
Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 94 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-4b3-9-cpl2264-used /565, , = More information =, , Type: Engine, Type number: 4B3.9 CPL2264; Transport weight [kg]: 360
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-d399-35b2530-u sed/698, , = More information =, , Type: Engine, Year of construction: 1010, Type number: D399 35B2530
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 00 , Flywheel SAE: Unknown , Working Hours: 9339 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 625 Kw, Rated Speed: 1200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-d398b-66b04781 -used/287, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D398B 66B04781; Transport weight [kg]: 6500
Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 5400 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 224 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c9-3-c9n-36559 69-used/425, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: C9N-3655969; Transport weight [kg]: 1745
groove width: mm x-travel: 1000 mm throat: mm table length: 1300 mm table width: 300 mm total power requirement: 14 kW weight of the machine ca.: 3.2 t required space: 2.9x3.1x2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
LCD monitor with electronic for Cybelec DNC 800, 804, 806 control . only a few years in use. Supplier / Manufacturer : TSUBIS Germany , Art Nr: LCD10-0072
used
turning diameter: 500 mm turning length: 1500 mm control: Masturn CNC 50 turning diameter over slide: 380 mm turning speeds: 2-2400 U/min 3-jaw chuck: SMW 3-jaw-chuck diameter: 270 mm bed width: 320 mm total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: 3x1,5x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mobile detriment machine Cambio 85 engine iveco 420hp 10 cylinder complete in operation a lot of spare parts diameter 850mm 5 knives
turning diameter: 325 mm turning length: 600 mm control: Siemens type: 840D Turret 12-fold, 12 stations: live tooling: turning speeds: 5000 U/min power capacity: 25 kW y-axis: mm c-axis: total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5x2,5x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2964KVA - 480 V @ 60 Hz, 2470 KVA - 400 V @ 50 Hz, Power (KVA): 2470, Voltage: 400 V, Working hours: 0
for the production of 27,000 bottles per hour. With shape
for production up to 28,000 bottles per hour. Good condition. Can be supplied with mould
Dishwasher Classeq Model: D 500 Stainless steel version with LCD display Powerful and universal dishwasher 2.3 and 5 min. rinsing time 1 plate rack, 1 universal basket and cutlery insert Output approx.: 30 baskets/hr / 540 plates Dishwasher with drain pump Washing-up liquid and rinse aid dosing device Connection 400V, 6,84kW, 16A-CEE plug Dimensions: 600 x 600 x 820 - 850mm, WxDxH NEW Machine 12 Months Warranty + Spare Parts Service Optional: Water Softener Underframe more baskets Maintenance contract Service Package Instruction & Commissioning You will find a large selection of dishwashers with us!
- Working area pipe steel up to 30 mm x 2 mm - Pipe working area stainless steel up to 30 mm x 1.5 mm - Pipe extension length 2,000 mm - Bending angle up to 180° + 10° overbending - Automatic bending sequence ( bending, twisting, longitudinal ) - CNC control - Input PC with software Transpro V2 + Tanspro V2 package (indication of previous owner) - Function triggering via hand switch - Clockwise bending direction - Radius range max. 125 mm mm -Auto. Mandrel lubrication - Laser scanner for security area - Incl. existing used tool for stainless steel pipe 1 mm 15, 18, 22, 28 mm Bending radius 1.5 D (various wrinkle smoothers, mandrels
Fully Equipped Bottling System A complete bottling system, ideal for beverage production! Perfect for both small and large-scale operations. System Components: Heated water tanks: 6 units of approximately 3000 liters each 1 unit of 6000 liters 1 unit of 10,000 liters Production lines: 2 complete bottling production lines Small bottling systems: 4-5 units for smaller productions Vacuum machines: Various machines for efficient packaging Blue Water system: Large system with separate oil burner Additional equipment: Approximately 70 components, including machines, spare parts, and accessories Advantages: Ideal for starting or expanding your beverage production Complete system, ready for use High production potential Has been active until 2023
Backup power generator LIKE NEW! The current number of operating hours is 21 hours . Manufacturer Zeppelin CAT Model PPO2000-C32 Year of manufacture 2007 Weight 26t Dimensions (L/W/H) 11,0m / 3,0m / 3,2m Condition Very good (used) Remarks/ Info: Engine overhauled in 2014 400 Volt 50 Hz 1200 KW 2000 kVA 1500 rpm According to this, the CAT engines have been completely reconditioned (according to Zeppelin, the engine is better in the repair ,as a new engine) . The current number of operating hours is 21 hours . The machine has been standing since 2014 . We were to a performance test last month at Cat Zeppelin ,there the machine has full power without complaint passed the test . The number of operating hours refers to both engines and the generator. Find more here - /
Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /
Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - /
The EWAB TS190 is a cutting-edge automated production system designed to streamline manufacturing processes while incorporating advanced laser technology. This versatile machine is equipped with a dedicated laser cell, enhancing its capabilities for precision cutting, engraving, and material processing. The integration of robotics, automation, and laser technology makes the EWAB TS190 a reliable solution for a wide range of industrial applications. Find more here - / Contact us at -
Metal 3D Printing Concept Laser for sale, second hand. The operating hours amount to approximately 10,000, of which a maximum of 1,000 hours are laser hours in which the laser actually ran. Medium: Ytterbium Wave length: 900-1200 nm Power: 2.65 kVA Specifications: -Type: M2 Cusing -Year of manufacture: 2015 -Very few laser hours! -Machine incl. filter unit-ATEX II-Water V2, sieve length, nitrogen generator with buffer tank -Delivery: immediately Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for the safe processing of of aluminum and titanium alloys etc. Only aluminum (AISi10MG) was printed on the system. The system has also saved a backup folder for titanium parameters. These titanium parameters were originally supplied, so "theoretically" you can also print titanium Outer dimensions: 2542 x 1818 x1987 mm (W ...
NEW- Unused Beckman Coulter Automate 1250, a high-performance liquid handling system that is designed to meet your laboratory´s needs for precision, accuracy, and flexibility. The Beckman Coulter Automate 1250 is a fully automated liquid handling system that can handle a wide range of volumes, from nanoliters to milliliters, with unparalleled accuracy and precision. It is equipped with a variety of features that make it easy to use and highly reliable, including a touch screen interface, integrated bar code reader, and automated tip loading and unloading. With the Beckman Coulter Automate 1250, you can streamline your laboratory workflow and increase productivity. It is ideal for a wide range of applications, including sample preparation, assay development, and high-throughput screening. Its flexibility allows you to perform a variety of assays, including ELISAs, PCR, and cell-based ...
2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...
Complete Lacquering line - Feeding - Primer application unit - Dryer - UV plant - UV dryer - Stacking System components are all from Bürkler and Kontra Formats: 1860, 2800, 5600x2070mm Number of application units: 10 units, 3 of which are UV UV dryer: 1x 4 UV-tubes, 1x 5 UV-tubes: 1x 6 UV-tubes Output: approx. 3300m²/h Find more here - / Contact us at -
ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -
Essemtec 1x CLM9000 but without a functioning laser beam Feeder ready for delivery: 2x CLM950 2x CLM952 1x CLM955 1x CLM9561x CLM950LED) Operating hours: 15282 Cassette slots: 6x 1x tray table Find more here - / Contact us at -
Dissolving station for copper cyanide The dosing system was designed according to drawing no. A10690 for the preparation of calcium cyanide and copper cyanide solution. The tank has a volume of approx. 1170 litres and is filled with water via an angle seat valve and with beads/scales/flakes via a feed screw. The dilution water is filled via a solenoid valve and a downstream angle-seat valve for volume adjustment. A spray nozzle in the aeration and deaeration dome prevents vapours from escaping when filling the tank. The water supply is shut off by a ball valve and the flow rate is adjusted by an angle seat valve. The extraction is switched on or off via the control unit. The feed screw first conveys the dry material into a two-stage shredder. From there, the dry material enters the container. The quantity of dry material conveyed is regulated via a slide valve on the feed screw. A su ...
SFC. Isolator SFC 10 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -
MEP Condor 90 CNC HR BJ Säge 2002 BJ Barrenmagazin 2013 Find more here - / Contact us at -
Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...
2018 Tampoprint Automatic printing and laser system consisting of: Conveyor system with transfer units for parts from transport trays to separation Multi-color pad printing system with IR drying cell Laser cutting cell with optical recognition Separation and packing station Find more here - / Contact us at -
2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...
2019 Soft Energy Controls CES0007 Ranking machine End of line testing machine which sorts and grades cylindrical and prismatic battery cells. It is quite a specific piece of equipment, but it has some components that have value and could be repurposed in other machines. Originally from Japan. Main functions: DCIR testing and grading of cells Sorting of prismatic and cylindrical cells based on the cell grade into trays Find more here - / Contact us at -
Laurijsen WeegAutomaten COMBIMAT CM-L4S Linear scales The linear scales from Combimat were specially designed as an initial model for the first first step in the automation of the packaging process. Thanks to the compact design, the weighing devices can be easily installed in any production area and can be cleaned very quickly when changing quickly when changing products. Applications The linear scales from Combimat are particularly suitable for dry, fine-grained products that can be easily conveyed in the conveyed in the vibrating chute: Tea, coffee, corn, rice, seeds, grain, animal feed, granulates, grain, etc, Advantages The weighing machines from Laurijsen WeegAutomats offer numerous advantages: - Very compact design - Machine made entirely of stainless steel - Touchscreen operation - Quick cleaning, very suitable for short suitable for short passages - Maintenance-fre ...
1992 COMBINED CONCENTRATION SYSTEM Type: AFN 454 US The system was in operation for a maximum of 2 months per year. WITH AROMA RECOVERY, USED, REBUILT AND EXPANDED, IN ADDITION TO EQUIPPED WITH NEW COOLING TOWER CIRCUIT EVAPORATOR TYPE OPERATION Horizont TYPE HEAT EXCHANGE al, CONDENSATION AROMA 4-stage EXTRACTION with SYSTEM VERSION: WATER live steam EVAPORATION SYSTEM TYPE > NEW preheating, recovery, cooling mixed condensation semi-barometric rectification - tray column especially for the juice industry 4 840 Kg/h AFN 454 U-S Technical data: 1-stage dearomatization and concentration, combined operating mode SYSTEM TYPE: AFN 454 U-S PRODUCT: Apple juice, cloudy Input quantity 6 600kg/h Input dry matter 12,0% Input temperature 15 ·c Water evaporation 4 840 kg/h Initial quantity 1 760 kg/h Starting dry matter 45 % Starting temperature approx. 18 ·c Aroma ...
2016 Hexagon OC 322 Measuring machine The machine is in perfect working condition. The 2016 Hexagon OPTIV CLASSIC 322 is a type of coordinate measuring machine (CMM) manufactured by Hexagon Manufacturing Intelligence. This machine is used for precision measurement and quality control in manufacturing processes. PRODUCT DESCRIPTION The Optiv Classic 322 combines optical and tactile measurement in one system (optional touch-trigger probe). The system supports multi-sensor measurements using the Vision sensor (CMOS colour camera, motorised CNC zoom) and the touch-trigger probe HP-TM. The Optiv Classic 322 provides easy pallet station integration with good accessibility to the measuring table from all sides. Measurement software is PC-DMIS. FIELDS OF APPLICATION • Shop floor and inspection room • Versatile geometry measurements and GD&T analysis DESIGN Design principle : Ben ...
The Stanzeinrichtung CutStar V2 XL is a stamping and punching machine designed for industrial applications. With its robust build and advanced technology, this machine is ideal for precise cutting, shaping, and forming operations. Weight: 12600 kg Dimensions (L x W x H): 3220 mm x 2750 mm x 3600 mm Connection Voltage: 25 kW Operating Pressure Hydraulic (Max/Min): 140 bar / -- bar Operating Pressure Pneumatic (Max/Min): 10 bar / -- bar Operating Voltage: 230/400 V Frequency: 3 x 400 V / 50 Hz Find more here - / Contact us at -
AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -
Sharpening machine Vollmer CAL 300 Left hand machine Specifications: Blade width: 100-420mm Blade length: from 8500mm Blade thickness: up to 2.8mm Tooth pitch: 20-120mm The height of the teeth up to 40mm Angle of attack up to 40 degrees Abrasive disc diameter: 300m Working speed 5-30 teeth/min Power 5.4 kVA/ 4.8 kW Weight approx 1600 kg Accessory: Oil vapor exhaust and filtration system Vollmer N170 emulsion filtration system Auxiliary feed for large blades Find more here - / Contact us at -
TOX pressotechnik CBM 004.025.001.a.007 Find more here - / Contact us at -
CTK 2200 Kaschieranlage: - Type: CTK 2200 - Nominal Width: 2,200 mm - Product Width: 2,200 mm - Working Height: 1,220 mm ± 50 mm - Processing Side: One-sided from above - Control Side: Right - Fixed Edge of Machine: Right - Machine Speed: 10 – 30 m/min - Max Production Speed: 25 m/min - Passage Height: 80 mm - Dimensions: - Total Width: 3,000 mm - Installation Length: 11,000 mm - Working Width: Max 2,150 mm - Height: 5,700 mm - Weight: Approximately 9,500 kg - Load Capacity: 80 kg - Maximum Cycle Speed: 10 cycles/min - Power Supply: 400 V / 50 Hz, 3 phases, and control voltage 230 V / 50 Hz + 24 V/DC In the event that the buyer wishes to laminate the panels on both sides, we can also offer a suitable stacking turner. Seen on the last picutre Find more here - / Contact us at -
- Manufacturer: DMG MORI - Model: CLX 450 - Type of machine: Horizontal Turning Machine - Year: 2020 - Max Spindle Speed: 4000 RPM - Weight: 6400 kg - Power Requirements: - Power: 39 kVA - Max Current: 56 A - Max Voltage: 440 V ±10% - Frequency: 50/60 Hz - AC Voltage: 400 V - DC Voltage: 24 V Including the following equipment: - 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti - more than 20 steady tool holders for turning and boring tools by ALGRA - 4 bolted tool holders by SAUTER/ALGRA - a mechanically operated bar puller toolholder by KINTEK - a live center - balanced pressure clamping (able to grip thin walled parts) - sets plastic drawtubes for bar working in different diametrers - more than 50 sets of soft machined jaws - 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW - SMW special ring for soft jaw turn ...
Horizontal Form-Fill-Seal Machine - Model: CO50Servo - Year: 2021 - Condition: NEW Specifications: - For heat-sealable materials - Color: RAL 9007 - Features: - Usable infeed conveyor length: 3400 mm - Speed up to: 100 packs per minute (ppm) - Film feed from above - Maximum film roll width: 500 mm - 1 fixed forming shoulder - 2 cross-sealing jaw pairs - Photocell control for printed film - Function: "No product – No bag" - Pre-warning for end of film roll - Maximum bag length: 300 mm - Maximum product height: 50 mm - Power: 5 kW, 380 / 400V Find more here - / Contact us at -
Manufacturer: KUKA Year of Manufacture: 2006 Model: KR 100 comp Type of Machine : Industrial Robot Find more here - / Contact us at -
Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!
Control Techniques Undrive M701 frequency inverter, with 5.5kW power. For Bobst Alpina 110 II matic. Control Techniques Undrive M701 frequency inverter, with 5.5 kW output. For Bobst Alpina 110 II matic.
max. wheel diameter: 150 mm gear width: mm max. module: 4 min. module: control: Sinumerik 840 D table diameter: 140 mm maximum axial offset: 200 mm milling tool taper: ISO 40 diameter of hob: max. 130 mm cutter length max.: 220 mm milling spindle speeds (infinitely variable): 300 - 1200 U/min shifting: max. 170 mm milling head -swivable +/-: 45 ° feed speeds: 1 - 1500 mm/min rapid travel speed: 3000 m/min workpiece magazin: Stück max. workpiece diameter: im Magazin: 150 mm total power requirement: 50 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,7 x 3,6 x 2,6 m Condition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Used gear hobbing machine, Pfauter, completely overhauled in 2023 by the specialist company SerWeMa. There is another identical machine available, but the spindle needs to be overhauled. If you are interested, you ca ...
60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Railing Cone 90 ° Drawing available Rotary valve
maximum number of results exceeded
please refine your search
