134,065 used machines on RESALE, but how to find them? Machine Search
three-phase motor, electric motor -Manufacturer: ADDA, electric motor type C160L-8/6 -Power: 3.5 kW -Speed: 720 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Number: 3x Motor available -Price: per piece -Dimensions: 635/320/H410 mm -Weight: 87 kg/piece
new
Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;
cutting diameter: 560 mm saw band length: 7.260x54x1,6 mm Control: mit 99 Programmen work height max.: 650 mm Chip coveyor: inkl. power capacity - table: 10 HP sawing motor: 650 kW weight of the machine ca.: 4.800 kg dimensions of the machine ca.: 3.400x2.050x2.380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the profile clamp: Manufacturer: META Type: CLIP The scope of delivery includes: 01x Profile clamp, used Design: for double shelves Material colour: hot-dip galvanized Total height: approx. 82 mm Total width: approx. 46 mm Material thickness: approx. 2 mm Weight | Pcs. approx. 0,150 Kg Note: Since these are second-hand goods, there may be damage, rusting, etc. Currently available in stock: approx. 200 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head
A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request
used
Orbital sander Comec LC/15AV Element diameter min/max 10-100mm 4kw main motor 2×0.25kw feed motor Sanding belt dimensions 1220x70mm CE Certified
1x VDI 40 steel bracket holder C4 C4-RC2040-51030 L= ; B= ; WeightG:= 3kg 2.2)58760 Cylindrical C4 adapter diameter 50x90mm 9x Inner Extractor Bracket 10x External Swivel Holder 3x outer piercing holder visible as far as possible 1) C4_R166_4KF-12060 Female Thread Swivel Holder 2) C4-B_SNR-27042-12 3) C4-R166.4FGZ-27050-16 External Rotary Bracket Right Triangular Plate : 4) C4-SDJCR-27050-11 External Swivel Bracket Right Triangular Plate 5) C4-DSSNR-27042-12 External swivel holder right 1x with plate, clamped from above 6) C4-SVJBR-27050-16 External swivel bracket right 1x with insert, Torx screws 7) C4-SDUCR-13080-11 Coro Turn Drill Rod, Internal Rotary Square Plate-Torx Sxamuk 8) C4-PCLNR-17090-12 Internal torque with clamping 9) C4-SVQBR 13090-16 Internal Rotary Holder Copy Plate 10) 3pcs C4-RF15.1230-G20-27050B & 27060B Cut-off holder sword Shipping costs on re ...
turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compound plant Bitzer with 6 pcs. compressor Bitzer S6F-30.2Y, in a container as a machine room, with control box fixed wired and condenser with 6 fans on the container.
Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA50-150 -Projection: 150 mm -Dimensions: 275/80/H140 mm -Weight: 10.3 kg
Cross sander for Comec chair components 5.5kw main motor Sanding belt width 100mm Extraction nozzle 110mm Dimensions of the machine 233x60x140cm
Description HEYLIGENSTEDT face lathe KH35-CNC with control Sinumerik 840 D Details Serial No. 70000134 Turning diameter over bed carriage 900 mm Turning diameter over bed sheets 1,400 mm Center height above floor 1,480 mm Tip height over bed panels 680 mm Bed width 850 mm Bed height 550 mm Control SIN 840 D Main spindle diameter at front bearing 206 mm Main spindle bore 100 mm max. main spindle torque 15,000 Nm Three-phase main spindle motor 40 kW
Grasselli C35.P Derinder Q14S05/P406 Year: 2020 400V 3 phase plug 2 x Available
N. 14 cut bar trolleys Measurements: 1.77 width x 2.07 depth x 2.3 height m. Each slot is calibrated to 10 kg.
SECOND-HAND DRYING KILN COPCAL - traditional heating system - capacity 70/80 mc - dimensionst mt 9,5x6x5+1H
SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)
Quick-action clamping device, quick-action clamp, quick-action vice, drilling device, machine vice, drilling machine vice, clamping sleeve, collet -Type: CH7-44 -Image: M48 -Collet: Ø 25 mm -Dimensions: 330/210/H135 mm -Weight: 17.4 kg
SECOND-HAND ORBITAL SANDER COMEC LC/20/AV - CE RULES - min/max diam. 10/160mm - with feeding units - volt. 400/80 - sn 010118 - year 2001
Hose reel, hose unwinder, tank hose reel, wall reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel -Manufacturer: Consul, grease hose reel -Type: M 095 -Hose length: 8 m -Dimensions: 780/270/H550 mm -Weight: 29.2 kg
Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good
modernization 2006 Control system 'Siemens' Max working diameter: 700-1500 mm Distance between railway wheels: 1435 mm Regulating distance between railway wheels: 1524 or 1676 mm Length of railway wheels sets: 1640-3000 mm Jaws clamp diameter: 550-1350 mm Max wheel width: 140 mm Spindle turn range: 4 Spindle turn: 9, 13, 5-18, 27 rpm Stepless feed speed range: 1,6-50 mm/min Machine dimensions: 8700 x 3650 x 3250 mm
ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RV-214W-16-50-WP-SLD APRIL 2021 SINGLE PHASE POWER VERY GOOD CONDITION TOUCH SCREEN 4 AVAILABLE
Rear weight, forklift weight -Manufacturer: Clark, rear weight from forklift type C500-Y80 -Recording/Dimensions: see photos -Dimensions: 1275/570/H940 mm -Weight: 1405 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg
Inv. Num. : 4368 Type: Comact Scan 2M Producer: ATOS Created: 2013 Parameters: Software: ATOS v7.5 Stack height: 1.8 mm Machine arm: 0.9 mm Swivel head: Foba Superball M-1 Notebook: Dell Precision M4700 Equipment: 1x Silver License Key 1x Remote Control 1x original notebook 1x bag with PC 1x Stand 2x Suitcase 3x Folders
Offer 24033 Specifications: - Tapping capacity M 3 - M 24 - Working range ( swivel radius ) 1800 mm - Infinitely variable speeds up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - Various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg
Heat exchanger for inert gas welding machine, inert gas device, cooler -Manufacturer: CLOOS, heat exchanger from inert gas welding machine GLC 353 MC3 -Blower: ebm papst type M4Q0465-DA01-S8 -Dimensions: 330/160/H330 mm -Weight: 4.2 kg
Key data: 500 , 30
Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3
For sale twist-off production line with knurling/lining machine CEPEDA MF 8 E. Perfect working condition. Speed 200-250 cpm.
Pester PEWO-pack 450 stretchwrapper for folding cartons, etc., including PEWO-therm shrink tunnel and PEWO-collect packing table, carton infeed with turning device and stacker, film splicing unit, format range cartons min. 30 x 30 x 60 mm (LxWxH), max. 100 x 100 x 250 mm (LxWxH), format range collation/bundle min. 30 x 30 x 60 mm (LxWxH), max. 300 x 380 x 250 mm (LxWxH), capacity up to 50 bundles per minute, electrics 3x400V+N+PE/50Hz, power consumption 13.1 kW, operating pressure 5 bar, infeed height 840 +/-10 mm, outfeed height approx. 800-950 mm, machine floor space approx. 4000 x 2513 mm (LxW), machine height approx. 2100 mm
1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.
Used loose curd line from OBRAM. New 2015. Line composition: - Plate whey cooler, - Whey tank, - Tubular thick curd coater, - Whey belt separator, - Paripac weigher/dosing machine. The machine is designed for dosing a specific quantity of product into the packaging machine. - Paripac bag packaging machine. Bagger designed for packing loose quark into bags. Packing weight 250/500 g.
Casing-in machine Make CMC Model Q-Case / Gemat Year 2011 Max size 500 x 420 mm (roll width 420 mm) Min size 100 x 120 mm Thickness 2 - 80 mm Available direct
Joint forming + pressing Make CMC Model Q-Case - Crator Year 2010 Max size 500 x 420 mm Min size 100 x 120 mm Thickness 6 - 80 mm Pressure up to 5.000 kg by hydraulics Available direct
Mobile pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.
D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph
Cyklop XZE-311 Strapping Press Year of construction: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Belt guide distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strapping force of the strapping unit: adjustable up to 2000 N Press force: adjustable from 5 to 48 kN Aggregate Type: CFH 1
Tailstock, counter bearing for dividing head, dividing head -Manufacturer: Swedturn, Type ST12 CNC 300 tailstock -Quill: hydraulically driven -Dimensions: see photos -Dimensions: 900/650/H450 mm -Weight: 265 kg
Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg
Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece
Haloila CobraX Pallet wrapper 2016, Pallet wrapper, rotating arm, wraps up to 2300mm, 1Ph
X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg
Qty. 1 Second-hand log homogenising furnace Mfc.: Rackwitz Industrieanlagne GmbH Built: 2009 Annual production: 50.000 tons mix Furnace charge max.: 25 tons Furnace performance: 6 - 7 t/h of 10 LOG Logs diameter: 103 mm - 405 mm Logs length: 7,000 – 7,300 mm Type: Cross circular Furnace cross circulator 3 pieces Heating zone Furnace Dimensions: 30.300 mm x 3.400 mm x 11.000 mm – L x W x H
CNC controlled three-axis under-table cross-cut saw with additional drilling unit for wood and wood-like materials, but also suitable for sawing aluminium non-ferrous metals and plastics. Closed compact production island, low noise pollution and no chips in the machine environment. Our automatic sawing and drilling machine KA 550 CNC - SAW and DRILL is versatile einsetzbar_ – Only saws in automatic mode and for single cuts - Drilling only - Combines drilling and sawing in a single operation The possibilities to work with the drilling unit include drilling and countersinking, combined drilling + countersinking with a combination tool, drill milling of longitudinal holes – longitudinal holes transversely – rectangular cut-outs. The drill feed speed and the drilling pressure can be sensitively adjusted. Technical data Circular Saw and Drilling Machine KA 550 CNC - SAW an ...
maximum number of results exceeded
please refine your search
