136,287 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000
; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
; Gross weight [kg]: 1918; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349
; Gross weight [kg]: 2016; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349
; Gross weight [kg]: 3524; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 610
; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 800
; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842
; Gross weight [kg]: 5033; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 842
; Gross weight [kg]: 5071; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842
Key data: 1200 KW, 1788 kVA, 660 V
Caterpillar CG170-v12 0-hours after overhauling! New:ALL liners, piston rings, bearings, gaskets, filters, ect. total running hours engine: 31.000 1200kw 1800kva year 2013 all documents scope: genset on frame control panel breaker panel Gasline pomps transformer
Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35 Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold lamination Specifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs
; Gross weight [kg]: 5952; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1082
; Gross weight [kg]: 4832; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 910
; Gross weight [kg]: 6934; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1307
; Gross weight [kg]: 1416; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219
; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 610
; Gross weight [kg]: 706; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 55
; Gross weight [kg]: 2238; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 418
; Gross weight [kg]: 608; Engine: Caterpillar C2.2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 66
Several original new and reconditioned turbochargers and cartridges for Caterpillar engines type 3300 / 3400 / 3500 / C 18 / C32 and older type's perfect machinery international bv the Netherlands info@perfectmachinery.nl Whatsapp +31 653549259 the Netherlands Whatsapp +34 682511830 Spain
2000/2200 KVA at 50 Hz, 2500/2750 KVA at 60 Hz, Power (KVA): 2500, Working hours: 46, Frequency: 60 Hz, Voltage: 3300 V
; Gross weight [kg]: 18290; Engine: Caterpillar 3516B HD; Accessories: Control Panel, Caterpillar 3516B HD Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.
; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.
We have 2 complete controllers (built in 2006) with all cards for Cathild drying chambers. Sale is possible in a package or individually.
Key data: 1257 KW, 1580 kVA, 400 V
Caterpillar 3512-B STD Serial No.: 8EM00341 1257KW 1580 kva stamford 400volt 50hz & 60hz possible scope: genset on frame and alternator control panel small accessories
; Gross weight [kg]: 1522; Engine: Caterpillar C7.1; Accessories: Control Panel, Double walled fuel lines, Keelcooled, Voltage (V): 24
; Gross weight [kg]: 1547; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 250
Key data: 2500 V, 11000
2 x zero-hours Caterpillar G3520H Natural Gas Generating Sets Scope of supply: Engine, Alternator, Base Frame and boxes of ancillaries as delivered from Caterpillar as part of factory scope of supply. Complete engine inspection undertaken in july 2025. Turbo found to be in as-new condition. Cylinders found to be in as-new condition. Crankcase doors were removed to inspect crank and connecting rods, all found to be in as-new condition . Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel
Orginal prechamber spark plug 1245-3556 For variable MWM TCG2020 v12/v16/v20 & Caterpillar CG170 -v12/v16/v20 engines. Natural gas 5pcs new
Cato PA160 Meat grinder Serial: 327 Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph
; Gross weight [kg]: 14470; Engine: Caterpillar 3516B; Accessories: Control Panel, Caterpillar 3516B Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.
Engine serial nr.: NYJ00480, Generator set serial nr.: K7F00641, Generator serial nr.: 74B0080; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel
Key data: 2000 KW, 2500 kVA, 400 V
SPECIAL PRICE GENERATOR SET NEEDS REPAIRS! One (1) Quality Used Caterpillar CG170-20 2000 kW Continuous Duty, 400v. 50 Hz. Natural Gas Generator set for CHP applications with only 14 hours of use since new from year 2016. The generator is a gas engine driven alternator with EMCP Control Panel, mounted on a bedplate and housed within a custom-built sound attenuated container. The standard package is composed of the following: Alternator and engine assembly, Automated control system, Instrumentation, Safety provisions, Engine cooler remote radiator, Silencer and CHP module. This unit is ready for delivery and sold "as is" .
CATERPILLAR C 175-16 year 2011 hours 100 power 3000 kva includ dry cooler and muffler loaded now in paris
; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 1000
Syngas Gasification Plant Caterpillar 5 generators G3516 1375 KVA 3 boilers, 1 turbine transformer cell, dry cooler, compressor . complete installations year 1997 in new condition all installations less than 500 hours
Availabel from German Stock ! 80x Part number Cat 229-9942 - Cylinderheads Gas Engine Serial G3512, G3516, G3520 Partnumbers CAT 415-5584, 315-2630, 315-2632 Naket Cylinder Heads
Key data: 7370 KW, 9213 kVA, 11 V
Five (5) Surplus/Never use/Never Installed, Caterpillar 16CM32C, 7370 kW, 11,000v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2009. The sale of these units include: Barring Gear, Air Intake System, Fresh Cooling Water System, Exhaust System, Diesel Oil System, Lubrication System, Air Starting System, Control Systems and more The generator is a GE Synchronous Generator, 9213 kVA, 7370 kW, 10 Poles, 720 RPM, 11,000v. 60 Hz. 0.8 P.F. IP54 IC81W. This unit comes with IMO Tier II certification and ABS certifications for the Heat Exchangers, Flexible Couplings, Diesel Engine and Generator. The shelf life of these units is over the five-year limit given by Caterpillar. Therefore, these units no longer have the Caterpillar Warranty. Unit is now ready for shipment.
Caterpillar 3412C DITA - Overhauled - 620 kW - 9BR
Caterpillar 3408 - Overhauled - 480 HP - 99U
Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!
maximum number of results exceeded
please refine your search
