cat wheel loader used for sale

Grinding wheel holder Klingelnberg (627.020.006) Outer diameter Ø 260 mm / inner diameter Ø 56 mm - Incl. grinding wheel Outer diameter Ø 400 see pictures technical drawing Auction-ID: A1-48483-68

Approximately 390 wheel chocks and approximately 320 wheel chocks. Auction-ID: A1-46485-245

Technical details Manufacturer: Caterpillar Model: M320 Serial number: 6WL00285 Type: Wheeled excavator Engine: - Caterpillar C7.1 diesel engine - 6 cylinders - Gross power: 128.8 kW (173 hp) - Net power: 123.5 kW (166 hp) Operating weight: 19000–19500 kg Maximum travel speed: Up to 37 km/h Maximum gradeability: 60% Fuel tank capacity: 385 l Hydraulic system: - Maximum pressure: 35000 kPa (5076 psi) - Maximum hydraulic flow: 280 l/min - Maximum swing torque: 43.4 kN·m Configuration: - Wheeled undercarriage - Hydraulic excavator boom - Swing upper structure Application: - Earthmoving - Road construction - Utility works - Excavation and material handling Dimensions: - Transport length: 8920 mm - Transport width: 2550 mm - Transport height: 3320 mm - Outside turning radius: 6400 mm Condition: Used Observed condition: - Heavy-duty wheeled excavator - Op ...

Viewing by appointment Auction-ID: A1-40389-22

- Last inspection at approx. 9,523 hours; - German machine / 1st hand; - Incl. Liebherr Likufix SWA48 quick coupler hydraulic; - Incl. 1 x backhoe bucket; - Good general condition; - Ready to drive; - Air conditioning - A/C; - ZSA; - CE document and data confirmation available; - Condition see photos; - Viewing recommended; Auction-ID: A1-48781-33

EMCO - Loading arm 4 inches - used - as spare part carrier

Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg

Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg

Pallet fork (fork length 1000 mm) with carriage / ballast weight three-point hitch

Rotary vane vacuum pump /// oel circulation lubricated Manufacturer: Busch Type: RC 0100B End pressure: approx. 20mbar suction power: approx. 100m3/h Status:Generalueberholt If you have any questions about this information or general questions about vacuum generation, we are happy to provide you with your services;

for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg

was connected to Gildemeister GMC 20

YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

If you are interested, please write

NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm

Spindle circle 165 mm Interface Gildemeister GM 16 AC

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

Loading caterpillar Hanomag D 600 functional, top engine

diameter: 15 mm length: 800 mm = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear

Pallets are checked for damage

Rod diameter 65 mm rod length 3200 mm

IRCO Profimat 65.6/196.6

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.

Kettner Year of construction: 1987 Pallet magazine Control: Siemens S5 2 pieces : 3000 EURO each

For more information, please write to

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - sn 1656

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996

Manufacturer: Sameca Type : MUZ.6.6 Year of construction 1996

Lifting height 21 m, 360° rotatable, lifting capacity 4.5 t, With fork and winch (without rope)

Robotic top loader which is currently taking flow wrapped bars and placing them into the infeed section of an automatic cartoner (which we also have for sale)

bar material dia.: max. 85 mm bar length: 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48232-76

Not tested; Auction-ID: A1-48399-214

Auction-ID: A1-40282-51

Auction-ID: A1-47406-73

Auction-ID: A1-47406-74

Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.

Was fitted on a Gildemeister Sprint 65

An all-terrain four-way sideloader Combilift is available. Fuel: LPG, load capacity: 6000kg, load center: 600mm, lift height: 5552mm, mast type: Triplex, overall height: 2845mm, free lift: 1600mm, fork: 1400mm, valves: 3, weight: approx. 9800kg, operating hours: 561h. Including fork positioner, heating, full cab and double gas bottle holder. Documentation available. On-site inspection is possible.

bar material dia.: 5 - 65 mm Bar length: 3000 mm feed length: max. 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m serial-no.: 32 - 201 588 Loading magazine with lower storage area from which the bars are lifted into the Feed tube can be lifted Rod diameter 5 - 65 mm Feed force infinitely variable max. 550N Insertion speed 335 mm/sec feed speed 335 mm/sec Return speed 335 mm/sec Loading time for 3000 mm bars: 30 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Stock number: D938, Loader, stainless steel,, Beritech type berilift., Chain type., Lifting fork with slit grip., For lifting/emtying of Vemag wagons., Total height 4100 mm., Variable tipping height., Estimated max tipping height 3250 mm., Material: Stainless steel AISI 304

Auction-ID: A3-46194-18516