cat pump used for sale

Dosing pump with tank and mixer, chemical pump SERA M412S0 diaphragm pump max. 3 bar 0 - 500 l/h motor: 0.0.00 37 kW 220 / 415 V Mixer: TMR AMS 018/8 Motor: 0.18 kW 670 rpm 230 / 400 V Tank: 230 l stainless steel ! used ! Dimensions: 550 x 670 x 630 mm

hydraulic test pump FLUKE Pressure generation up to 700 bar / 10,000 psi Two pressure connections 3/8" female thread Digital pressure gauge up to 400 bar

Vacuum Pump Atlas Copco GHS 900VSD Vacuum Pump Year: 2020 - Ultimate pressure: 0.35mbar(a) 0.26 Torr 35.0 Pa - Voltage: 380-460V - Frequency: 50 / 60 Hz 3pH - Pmotor: 15.3kW / 21hp - N: 700 r/min - Weight: 520Kg - Year of construction: 2020

2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min

Cooling capacity: 619,9kW. Heating capacity: 627,7kW. Number of fans: 12x.

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

feed pressure: 24 bar liter capacity: 160 l/min total power requirement: 1,5 kW weight of the machine ca.: . t dimensions of the machine ca.: . m High pressure pump The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply. About usmore than 400 of our own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website. Visits are possible by arrangement.We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: . bar liter capacity: 60 l/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Immersion pump The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply. About usmore than 400 of our own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website. Visits are possible by arrangement.We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Böllhoff, Type: 003-050-DP, Year: 1994, Transmission ratio: 3:1, Compressed air bar max: 6, Förderleistung l/min: 8, Druckluft max bar: 8-24, FREE TEXT: Leimfilter/Leimverteiler, Year :1994

Stock# U2443-3 Used twin screw pump by Bornemann type SLH 125-38. Contact parts stainless steel. Feeding inlet has diameter 80 mm, discharge outlet 65 mm. Pump has working output in range from 3 to 5.5 m3/h. Working rotation in range 328-468 rpm. Product viscosity up to 10000 cSt. Pump is driven by el motor 11 kW, 720 rpm, 380/660 V, 50 Hz. Feeding pressure up to 15,8 bar, suction pressure -0,20 bar. Self-priming pump in hygienic design. Mounted on stainless steel platform.

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: Becker , Type: SV.5.430/2, Year: Turbine zum Kühlen von Transportkette, Control: A 1781760, Year :Turbine zum Kühlen von Transportkette

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar/Anlagen werden geprüft und gereinigt, Year :2006

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar, Year :2006

Manufacturer: IBK, Type: 33-110, Year: 2006, Durchflussbereich l/min: 9, Kolbenpumpen gesamt: yes, Transmission ratio: 33-1, Compressed air bar max: 8, Pneumatic pump: yes, FREE TEXT: Materialüberdruck 264 bar, Year :2006

Manufacturer: Airlesspumpe B & M, Type: BMP 1132, Year: 2004, Kolbenpumpen gesamt: 1, Transmission ratio: 32:1, Volumenstrom Doppelhub ccm 2: 72, Volumenstrom Doppelhub ccm 2: 72, Compressed air bar max: 256, Pneumatic pump: yes, Wandhalterung: yes, Year :2004

Manufacturer: Krautzberger, Type: 30-10, Year: 2000, Kolbenpumpen gesamt: 1, Volumenstrom l/min: 2, Volumenstrom l/min: 2, Luftverbrauch bei 6 bar: 8, FREE TEXT: fahrbar/mit Becherhalterrung, Year :2000

Manufacturer: Hübner Airlessgerät, Type: HP 4/32 RF, Transmission ratio: 30:1, Volumenstrom Doppelhub ccm 2: 27, Volumenstrom Doppelhub ccm 2: 27, Fördermenge: 27 m³, Luftverbrauch bei 6 bar: 8, Compressed air bar max: 256,

Manufacturer: Kopperschmidt, Type: DC 15.50, Year: 1984, Transmission ratio: 15:1, Compressed air bar max: 120, Förderleistung l/min: 27, Druckluft max bar: 8, FREE TEXT: geprüft auf Funktion, Year :1984

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Equipment: -Bypass - On / Off - Forward / Backward - 2 speeds - With mechanical dimmer - Connections Friedrich No. 2 DN 40 - In operating condition

Operating pressure: 2800 bar, Flow rate: 27 l/min, Drive: Volvo Diesel, 160 kW, Operating hours: approx: 350h Trailer, incl. accessories,

KSB Submersible Motor Pump with Water-Filled Motor Manufacturer: KSB Item number: 110 321 Type: BRZS 535 /1a Motor Type: 12 A 923 Operating voltage: 380/660 V Rated current: 191/111 A 92 kW Speed: 450 1/min Q: 250 m³/h H: 26 m IP: 58 Year of manufacture: unknown Length: approx. 2750 mm The pumps are unused stock goods and are delivered in the original KSB wooden freight crate. More pumps - new and used - can be found in our shop! International shipping costs on request!

Brand Metso Type Pump Model USHM 75 |180 w9Hc Chassis number 3013720100101,00 Year of construction 2011 Weight 0.5 ton Assets 11Kw Length mm 3200 Width mm 700 Height mm: 1100 Transport dimensions L x W x H 3.2 x .07 x 1.1 State machine Good Type of control Automatic Electrical connection 32A 5p Photos/film available: Yes

Agilent G 1310 A Isocratic HPLC Pump Flow Range 0.001-10 ml/min

Vertical Multistage High Pressure Centrifugal Pump KSBTyp Movichrom N CN 3/10 2RFabr. Nr 1-P30-837561Nominal flow rate max. 3 m3/hNominal delivery head 70 meters = 7 barNominal speed 2900 rpm. Motor power 1.5 kWNet connection 400 volts, 50 Hz- pump structure in 10 stages- pump elements made of stainless steel, pump base made of cast iron connection flanges DN 32- suitable for drinking water supply, irrigation and drainageSpace requirement pump L x W x H 250 x 220 x 830 mmWeight 38 kgUnused replacement pump made of

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Pump module to add to VERTIwrap machines for filling liquids (milk, juices, water, etc.). - Specifications depending on customers product (product sample necessary). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Piston pump module for VFFS or HFFS machines for dosing liquids and paste-like products. Suitable for various viscous substances (e.g. lotions, creams, ointments) and liquids (milk, juices, water, etc.). Controlled by servo motor, including storage hopper and stirrer. - Specifications: dosing range: 100-1000ml | accuracy: +/- 0,5-1% | speed: 45 cycles/minute at 70ml dosing volume | hopper capacity: 70L | power supply and consumption: 3-phase, 380V, 1,5kW | dimensions and weight: depending on final layout. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full w ...

Rexroth Pump Axial Piston Pump AKP140R with Valve for ANGELS refurbished Type: AKP140R with valve Manufacturer Part Number: R901021899 Type code: SYDFEE-20/140R

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

Wilo High Pressure Centrifugal Pump Economy MHIE 203N-2/V/3-2-2G,G1/G1,0.75kW 4171765

Manufacturer: Hidrostal Model: F10K-SST+F2310-L Pump Type: Screw centrifugal pump Material: Stainless Steel Find more here - .ucymachines/ Contact us at - sales@ucymachines

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Stock number: PC2304, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Impeller: Ø 120 mm, Motor: 1,1 kW - 220/380 Volt - 2870 rpm, Theoretical capacity: 15000 l/h, Working pressure : Max 18 bar, Working temperature: Max 95 °C, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: P348, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: High pressure pump, Construction: Mounted on stainless foundation with wheels, Motor: Variator gear - 3,0 kW - 350–1750 rpm., Manufacturer: Rannie, Type: 18.50, Other: Serial no. 4661/71

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: P342, Material: Plastic, In stock: Yes, Amount in stock: 1 pc., Item: Membrane pump, Manufacturer: Almatec, Type: A10, Other: Runs on compressed air

Stock number: PM2076, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Inlet: Flange L 350 x W 180 mm., Motor: 1,5 kW - 220/380 Volt - 186 rpm., Theoretical capacity: 1000 l/h., Manufacturer: Seepex, Type: BT 2-12, Other: Screw feeding

Stock number: P321, Material: Plastic, In stock: Yes, Amount in stock: 3 pcs., Item: Membrane pump, Connections: Ø 3/4, Theoretical capacity: 4800 l/h., Working pressure: Max 5,5 bar, Manufacturer: Albin, Type: AD0060PXT

Stock number: P320, In stock: Yes, Amount in stock: 6 pcs., Item: Dosage pump, Theoretical capacity: 12 l/h., Manufacturer: Grundfoss, Type: DME 12-6AP-PP

Stock number: P311, Material: Stainless steel, In stock: Yes, Amount in stock: 1 pc., Item: Barrel pump, Straw: Ø 40 x L 900 mm., Motor: 460 Watt - 220 volt - 9100 rpm. - Ex motor, Manufacturer: Lutz, Type: Niro 40

Stock number: P319, In stock: Yes, Amount in stock: 3 pcs., Item: Dosage pump, Theoretical capacity: 7,5 l/h., Manufacturer: Grundfoss, Type: DDA 7,5-16 FCM

Stock number: P285, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Barrel pump, Straw: Ø 33 mm. x L 3025 mm., Motor: 220/380 Volt - 18800 rpm.

Stock number: P290, Material: Plastic, In stock: Yes, Amount in stock: 2 pcs., Item: Membrane pump, Connections: Ø 1/2, Theoretical capacity: 1450 l/h., Working pressure: Max 4 bar, Manufacturer: ASTI, Type: PFD2 216

Stock number: P276, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Grease pump, Motor: Gear motor - 2,2 kW - 220/380 Volt - 110 rpm., Dimensions inlet: Ø 2½, Manufacturer: Kolding, Type: 2201

Stock number: P280, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Pump, Construction: Mounted on stainless foundation, Motor: 0,55 kW - 380 Volt - 1410 rpm., Theoretical capacity: Max 2500 l/h., Manufacturer: ABS/SIHI, Type: AKLA 1201

Stock number: P269, Material: PVC/Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Dosing pump, Motor: Ex motor - 0,18 kW - 220/380 Volt - 1330 rpm., Theoretical capacity: Variable - Max 24 l/h., Working pressure: Max 10 bar, Manufacturer: Grundfos Alldos, Type: DMH 24-10, B-PVC/V/G-X-44B1E1