cat generator power used for sale

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 160 mm -6 set: clamping jaws -Weight: 17.5 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg

Power converter, power supply, power supply unit, converter, servo power unit, frequency converter Manufacturer: SSB -Type: DDUS 06 E38 C5 -Quantity: 1 available Price: per piece -Dimensions: 250/205/H195 mm -Weight: 5 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm -Dimensions: 650/460/H600 mm -Weight: 60 kg

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Power supply unit, built-in power supply unit -Type: (DIN 41752) G24 G5/25WRGD -System: SVS2 -Current input: DC 24V -Current output: DC +5V/25A DC +-15V/0.3A -Dimensions: 270/80/H220 mm -Weight: 2.5 kg

power converter, power supply, power supply -Type: Sitop PSU300M -Input: 3AC 400 V -Output: DC24V/20A -Quantity: 77 pieces available -Price: per piece -Dimensions: 180/170/H90 mm -Weight: 1.3 kg/piece

Power supply, converter, converter, power supply unit -Type: XT40.241 -Input: 3AC 400 V -Output: DC24V/40A -Dimensions: 250/170/H140 mm -Weight: 1.6 kg

Power converter, power supply, power supply unit, servo power unit -Manufacturer: Baumüller -Type: BUS21-15/30-30-001 -Quantity: 1 available -Dimensions: 400/55/H310 mm -Weight: 4.9 kg

Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 0-30 volts DC -Dimensions: 150/240/H130 mm -Weight: 4.5 kg

Switching power supply, control, modem, power supply -Type: SNT 25 -Dimensions: 97/100/H36 mm -Weight: 0.35 kg

Converter, power supply, power supply, switching power supply -Type: SL40.300 -Input: 3 AC 400/500 V -Output: DC 24-28 V/40 A -Dimensions: 275/125/H120 mm -Weight: 3.25 kg

Key data: 2500 V, 2711 , 6300

Engine; MTU204000L64 Year of Construction 2025 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 6300 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: F-Tron -Type: 2498219.1 -Art. No .: 881-01026 -Number: 1x control cards available -Price: per piece -Dimensions: 270/220/H45 mm -Weight: 1.4 kg

Converter, power supply, power supply unit -Manufacturer: Siemens -Type: Sitop Sitop SMART 10A 6EP1 334-2AA01 -Input: AC 230 V/120 V -Output: DC 24 V/10 A -Number: 1x available -Price: per piece -Dimensions: 125/75/H125 mm -Weight: 0.7 kg/piece

Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO -Type: H150 5V30A -Number: 1x control cards available -Price: per piece -Dimensions: 220/115/H115 mm -Weight: 2 kg

DC power supply, Contactor -Manufacturer: Mintard -Type: R100 -Quantity: 1x supply available -Weight: 0.1 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: Monovolt PK 60 136-44585 -Number: 2x control cards available -Price: per piece -Dimensions: 40/170/H265 mm -Weight: 0.95 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: PK 50 monovolt -Number: 1x control cards available -Price: per piece -Dimensions: 40/210/H130 mm -Weight: 0.8 kg

Power converter, current inverter, current transformer, drive inverter, controller -Input -Output -Technical data: see photos -Quantity: 2 available -Price: per piece -Dimensions: 170/115/H110 mm -Weight: 2.4 kg

2007 Mercedes Combined heat and power plant (CHP) The CHP plant was originally intended for an oil platform. Therefore, it is protected against salt water and can also be operated in island mode. Technical data (See pictures) CHP plant with Mercedes engine, which is designed for multi-quality fuel (diesel, heating oil, pyrolysis oil or vegetable oil). Thus preheating unit and corresponding exhaust gas purification. BJ. 2007. Operating hours: 0 (test run only); The unit was never connected to the network. If palm or vegetable oil is used, preheating” is required to get above the pour point. All pumps were completely overhauled by the manufacturer when we purchased them (see Rg with maintenance report). If you want to drive in island mode, this must be changed on the control + the controller on the generator must be replaced. In addition to electricity, the unit can also recover  ...

Converters, converters, converters, drive converters, controllers -Type: Movitron 235 -Input: 380-415V -Output -Number: 1x available -Price: per piece -Dimensions: 155/350/H175 mm -Weight: 4.6 kg

Transformer, converter, inverter, three-phase autotransformer -Type: 4AV4074-1JA -Technical data: see images -Dimensions: 75/120/H130 mm -Weight: 1.1 kg

Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg

Transformer, converter, inverter, three-phase autotransformer -Type: 4AV2600-2AB -Technical data: see photos -Dimensions: 160/140/H200 mm -Weight: 8 kg

Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 Volt AC -Output: 24 V 2.5 A -Dimensions: 160/270/H110 mm -Weight: 5.5 kg

Key data: 206 KW, 500 kVA, 400 V

Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018

Power supply, converter, power inverter, power supply unit -Type: PE 1980/20 U -Input: 220 VAC -Output: 5 VDC 200A -Dimensions: 200/320/H130 mm -Weight: 8.5 kg

Switching power supply, control unit, modem, power supply -Type: SPA 15-11810 -Price: per piece -Number: 8 available -Weight: 0.6 kg

Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg

Power test chamber with transformer transformer Input - primary 400 V three phases Output - Secondary Switchable - 230 V three phases - 400 V three phases - 525 V three phases - 660 V three phases Power 50 KVA Space requirement W - 800 x D - 400 x H - 2,000 mm Weight approx. 430 kg

Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg

Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg

Key data: 65 KW, 400 V

Buderus Gas Generator (CHP) E 0826 DN-60 Gas electricity and heat generator from 1998 with 41,972 operating hours, closed unit, generator with voltage fluctuations. 1 available 65 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Buderus Model No.: E 0826 DN-60 Type: Gas CHP Serial number: 03198-00020-283 Power [KWel]: 65 Power [KWth]: 110 Engine: MAN E0826 E301 Year of Make: 1998 Hours: 41,972 Weight unit [kg]: 2,100 Dimensions LxWxH [m]: 3.10 x 1.00 x 1.75

Power supply for servo amplifiers -AC supply voltage: 18-110 V rms/47-63 Hz -DC link voltage: 24-155 V -Dimensions: 60/165/H240 mm -Weight: 1.7 kg

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x 63 A socket -Supply cable, plug 63 A -Dimensions: 520/520/H800 mm -Weight: 20 kg

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 19.5 kg

pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece

Power converter -Type: Sitop power 20 -Input: 3 AC 400 V -Output: DC 24 V/20 A -Dimensions: 240/130/H130 mm -Weight: 3.8 kg

power resistor, wire potentiometer, resistor -Price: per piece -Number: 4x available -Weight: 0.5 kg

Converter, power supply, power supply unit, switching power supply unit, power supply unit -Manufacturer: Siemens Schroff, power supply switching power supply -Type: Siemens 805 Schroff SC 8030 -Technical data: see nameplate photos -Dimensions: 290/135 / H65 mm -Weight: 1.9 kg

Power supply, power converter, power supply unit, switching power supply, MC3 controller -Manufacturer: Krauss Maffei, power supply unit from injection molding machine -Type: NT 100 -Dimensions: 260/140/H130 mm -Weight: 5 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply -Manufacturer: Siemens, Power Supply -Type: 6EW1380-1AA -Input: 93-265V -Output: 24V/4A -Dimension: 150/80/H120 mm -Weight: 0.7 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply -Manufacturer: Siemens, Power Supply -Type: 6ES5 930-8MD11 -Number: 4 pieces available -Price per piece -Dimension: 120/45/H135 mm -Weight: 1.0 kg/pc.