cat 3520 e used for sale

pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm -Weight: 8.7 kg

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Depa, air-operated double diaphragm pump -Type: DL25-FA EEE P -Flow rate: l/min -Discharge pressure: bar -Dimensions total: 340/240/H325 mm -Weight: 9.6 kg

pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 270 mm stroke: 4-100 mm no. of strokes: 130 Hub/min ram - range of adjustment: 80 mm table surface area: 670x540 mm ram surface: 460x300 mm hole in the table: Ø 100 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1500x2300x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 375-550 mm coil outside dia.: 1600 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1500x1500x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

pressure: 100 t throat: 340 mm stroke: 8-140 mm no. of strokes: 50 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x700 mm ram surface: 650x450 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: BxTxH 2300x1600x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 8-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 100 mm table surface area: 900x625 mm ram surface: 600x280 mm hole in the table: Ø 150 mm table height: 1000 mm tool hole in ram: Ø 40 mm : 490 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 1800x2200x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 540 liters -Number: 12x containers available -Price: per piece -Dimensions: 1080/1000/H1110 mm -Weight: 105 kg/piece

container, granulate container, storage tank, powder container, color powder container -Container: Stainless steel container with castors -Capacity: approx. 230 liters -Number: 2x containers available -Price: per piece -Dimensions: 750/700/H890 mm -Weight: 62 kg/piece

Pull cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, multi-purpose cylinders -Manufacturer: Enerpac, Hydraulic Cylinder Double Acting Pressure Force 9 Ton -Type: BRD96 -Stroke: 150 mm -Piston rod: Ø 25.4 mm / M22 x 1.5 -Dimensions: 350/63.5/H100 mm -Weight: 6.8 kg

pressure: 75 t throat: 310 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x610 mm ram surface: 600x175 mm hole in the table: Ø 170 mm table height: 820 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, easily machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Precision Series Limit Switch EUCHNER

safety switch, safety switch, protective grille switch -Manufacturer: Euchner, Safety Switch from vertical lathe Scherer VDZ 80 DS -Type: TZ1LEO24SR11 -ID.No.: 070828 -Technical data: see photo type plate -Dimensions: 175/110/55 mm -Weight: 1.7 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: PCM, tapping pliers 4 pieces -Type: ET1-40 -Size: 1x Ø9 mm / 2x Ø10 mm / 1x Ø12 mm -Delivery/Price: complete -Transport dimensions: 80/80/H52 mm -Weight: 1.2 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: PCM, tapping collet -Type: ET1-32 -Size: Ø 10 mm -Delivery/Price: complete -Dimensions: Ø32 x 44 mm -Weight: 0.2 kg

Type: ELMO-G 2BH1 490-1AH13 2-flute pmax.: 180 mbar Motor: Siemens Power: 0.43 kW Voltage: 230/ 400 V frequency 50/ 60 Hz Degree of protection: IP54 New !

Gear Motor SEW-EURODRIVE Type: W20 DT63 L4 ( W20DT63L4 ) Power: 0.25 kW Speed: 79 rpm Voltage: 220/240 V New ! Frequency: 50 Hz

Gear Motor SEW-EURODRIVE Type: R37 DT71D4/TF/MSW ( R37DT71D4 / TF / MSW ) Power: 0.37 kW Speed: 35 rpm Voltage: 380/415 V New ! Frequency: 50 Hz

grinding drum, deflection drum, belt sander, belt grinder, drum sander -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 340 mm -Record: Ø 77 x 445 mm -Quantity: 5x drum available -Price: per piece -Dimensions: Ø 340 x 640 mm -Weight: 82.0 kg/piece

hydraulic filter, filter element -Manufacturer: Hydac, ventilation filter with filling strainer -Type: ELF 5-210-3.0 -Dimensions: Ø 176 x 355 mm -Weight: 2.7 kg

Centrifugal Pump, Water Pump DUE EFFE ES 75 Motor: 0.55 kW 2800 rpm 220 / 380 V Dimensions: 300 x 180 x 290 mm

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

SEW-EURODRIVE Type: KA47 T DT80 N4 /BMG ( KA47TDT80N4/BMG ) Power: 0.75 kW Speed: 159 rpm Voltage: 220/380 V Frequency: 50 Hz Dimensions: 55x20x20 Shaft diameter: 35 mm

Geared motor, gearbox with motor SEW-EURODRIVE 1,1,000 1 kW 128 rpm Gearbox: R42 LP90 /A ( R42LP90/A ) i: 1 : 10,92 input speed max: 1400 rpm shaft diameter output: Ø 25 mm motor: SIEMENS 1LA5090-4AA11-Z 1,1,1,00 mmbr /br / 1 kW 1405 rpm 230 / 400 V 3 AC IP55 New !' Dimensions: 620 x 21240 x 200 cm

Geared motor SEW-EURODRIVE type: RF32 DT80K4/ BMG ( RF32DT80K4/BMG ) 0.55 kW 94 rpm 220/380 V 50 Hz used, tested ! Dimensions: 440 x 200 x 140 mm Shaft diameter: 120 mm

SEW-EURODRIVE Type: KF67 LP100 ( KF67LP100 ) 1.8 kW 132 rpm 380 V 50 Hz IP 54 Dimensions: 87x27x26 cm Shaft diameter: 40 mm

Gear Motor with Brake SEW-EURODRIVE 0.3 / 1.3 kW 11 / 47 rpm Gearbox: R803 LP90 ( R803LP90 ) i: 1 : 57,, 44 motor: SDFT90L8/2BMG/HR 0.3 / 1.3 kW 630 / 2680 rpm 400 V 3AC IP 55 Shaft diameter: Ø 50 mm Wavelength: 100 mm Groove width: 14 mm Motor base: 310 x 290 mm Hole spacing ( parallel to shaft ): 260 mm Hole spacing ( transverse to shaft ): 215 mm Hole diameter: Ø 17.5 mm used, tested ! Dimensions: 850 x 310 x 365 mm

Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, geared motor -Type: R32DT63N4 i = 17.73 :1 -Speed: 74 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 307/160/H145 mm -Weight: 9.7 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, immersion pump -Cooling water pump: coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Dimensions total: 500/340/H880 mm -Weight: 74 kg

Hybrid cable, connecting cable, for MOVIMOT with cable glands SEW 01867253/5m Length: 5 m New ! Dimensions: 400 x 400 x 50 mm

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1996

Gear motor, electric motor, three-phase motor, door drive, roller door drive, sectional door drive, electric gear motor, -Manufacturer: EMB, gear motor -Type OB-04,6/4 S -Power: 1.1/1.5 kW Speed: 31/47 rpm -Design: B3 -Shaft: Ø 34 x 60 mm -Dimensions: 480/210/H230 mm -Weight: 29 kg

Agitator tank, agitator vessel, agitator tank, agitator vessel, silo system, transport silo, tank, fertilizer storage silo, melting vessel, melting tank -Stainless steel tank: with agitator -Contents: 750 liters -Individual components: see photos -Transport dimensions: Ø 890 x 1280 mm -Weight: 171 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer -Manufacturer: Elsund, Transformer Type BBXB -Power: 2.233 kVA -Technical data: see photo type plate -Dimensions: 210/210/H255 mm Weight: 30 kg

tool holder, tool holder, milling chuck, milling tool, chuck, milling cutter holder -Chuck: Holder: HSK50 -Clamping range: Ø 0 - 10 mm -Dimensions: Ø 63 x 135 mm -Weight: 1.4 kg

chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 860/360/H425mm -Total weight: 206 kg

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Single limit switch EUCHNER N1AD514 10 A 250 V IP67 spare part e.g. for TRAUB TND300 ! used ! Dimensions: 100 x 30 x 80 mm

Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: PCM, tapping collet -Type: ET1-40 -Size: Ø12 mm -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg

Steam generator, evaporator -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

Single limit switch BALLUFF BNS 819-FD-60-101 ( BNS819-FD-60-101 ) BNS0003 DIN 43693 0930HU spare part e.g. for TRAUB TND300 ! used, tested ! Dimensions: 105 x 30 x 70 mm