cat 3520 e used for sale

Reference Num.: 4149 Brand: EPSON Type: Stylus Pro 7900 Construction year: 2011 Available: directly Status: Not in production Location: Deutschland Equipment: - SpectroProofer - diverse Toner und Verbrauchsmaterialien

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebm, axial fan type W2G144-AA21-01 -Voltage: 24 V 15W 3000RPM -Quantity: 1x fan available -Dimensions: 180/170/H50 mm -Weight: 0.8 kg

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN iTNC 530 Table dimensions: 500 x 380 mm table weight: 500 Kg c-axis: 0.001º ( ± 360º) 0 b-axis: 180 ° rapid traverse X-axis: 80 m/min feeds: 50 m/min spindle turning speed range: 18.000 U/min spindle taper: BT- 40 spindle drive: 30 kW Internal cooling system: 40 bar handwheel: HEIDENHAIN HR-410 total power requirement: 50 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Murr Elektronik, mains filter mains suppression filter 3-phase -Type: 10375 -Quantity: 1x filter available -Dimensions: 250/150/H65 mm -Weight: 3.4 kg

Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, Timetronic ECO JH charger -Type: D400 G 24/70 B-ETIS -Input voltage: 400V 50-60Hz -Power: 24V/70A -Dimensions: 500/500/H730 mm -Weight: 55 kg

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG 520-2 MW -Type: 520-2MW -Max. Welding power: 500 A -Water cooled -Wire feed case: ESS DVK 17 -Dimensions: 1160/500/H1220 mm -Weight: 379 kg

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm dimensions: 4400x2200x3940 mm weight of the machine ca.: 15.000 kg Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 stop fingers - Control conversion 2011 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inert gas welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Ess, inert gas welding machine MIG-MAG type 310 MW -Max. Welding power: 310 A -Water cooled -Wire feeder: ESS PS 12-8 -Accessories: including hose package, ground cable -Dimensions: 1020/480/H910 mm -Weight: 208 kg

Wire electrode, welding wire, welding wire -Manufacturer: Elga, protective gas wire electrode cored wire Elgacore DWA 50 Ø1.2 mm -Type: Elgacore DWA 50 Ø1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 5.1 kg

pressure: 110 t chamfer lenght: 2550 mm Control: Cybelec CybTouch 15 weight: 9000 kg dimensions: 3000 x 2100 x 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EREMA flush filter with partial flush back. SW 4/134 RTF

Linear drive, linear gearbox, lifting gear, spindle drive, linear unit, linear guide, linear axis, linear actuator -Manufacturer: Thomson, linear actuator Electrak E150 -Type: DF36-10W51-03L02MM -Dimension: 300/200/H110 mm -Weight: 2.2 kg

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg

Key data: 750 mm, 600 mm, 520 mm

Machine Details Stock-No. 1105-04037 Type of machine Universal Milling Machine Make LID MAHO DMG Type DMU 70eVolution Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time according to the arrangement Freight basis ex Works Price 45000 EUROS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm Control HEIDENHAIN iTNC 530 Additional information Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution NC swiveling rotary table (700x500) Spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 Tool Changer -------------------- Magazine places: 32 Pick up domestic equipments -------------------- sample Chip Conveyor 2nd processor card electronic handwheel HR410 INTERFACE FOR EROWA WITH EROWA ROBOTS RENISHAW SAMPLE Flushing gun

Key data: 180 mm

First-class renovated extrusion recycling plant made by EREMA Intarema 2018 TVEplus for the processing of post-consumer polyethylene and polypropylene, capacity up to 2,400 kg/h, built in 2019 for sale. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Flange connection, V-flange -Weld neck flanges. 183 pieces -Type: DIN2633 / EN1092 26 different versions see photos parts list -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H540 mm -Weight: 533 kg

Key data: 550 mm

Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: SEW-Eurodrive, geared motor type RF17 DT71D4 -Speed: 55 rpm / i= 25.23:1 -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 380/200/H160 mm -Weight: 9,9 kg

Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SA77 DAS90S4/TF/IS -Speed: 1450/6.4 rpm i= 225.26 -Power: 0.55 kW -Hollow shaft: Ø 50 x 190 mm -Dimensions: 550/280/H300 mm -Weight: 69 kg

Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS80N4/TF/IS -Speed: 1400/91 rpm i= 35.57 -Power: 0.37 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 490/120/H210 mm -Weight: 22 kg

Prepared for CNC control Siemens 840 DSL Precision turntable make EIMELDINGEN with aerostatic axial bearings Specifications Table diameter 5,600 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 30,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 30,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph

ECKERT SZAFIR BL2 plasma cutting machine was built in 2022 in Poland by Eckert AS Sp. z o.o. The machine, designed for precision cutting sheet metal made of structural steel, stainless steel and aluminium, is distinguished by its large 6 metre long and 2 metre wide sectional work table. The large area of the table makes it possible to efficiently machine a single oversized workpiece or multiple sheets at the same time, guaranteeing a high level of user comfort through the ongoing elimination of contamination. In addition, the portal structure based on a welded steel profile ensures excellent stability of the machine geometry, which does not become unstable under heavy loads. The SZAFIR BL2 plasma cutting machine has worked approximately 867 hours to date. Technical specifications of the ECKERT SZAFIR BL2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W ...

pressure: 150 t quantity of oil: 480 l tracking travel: 30 mm safety distance: 180 mm dimensions: 1440x1690x2800 mm total power requirement: 18,5 kW weight of the machine ca.: 4200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 350 kN injection volume: 58,5 cm³ screw diameter: 28 mm platen size: 260 x 254 mm Condition: used, Specification: injection moulding machine for TPE - used clamping unit: - clamping unit: vertical - clamping force: 350 kN - opening stroke max.: 300 mm - platen distance max.: 500 mm - Mould installation height min.: 200 mm - Clear width between tie bars: 260 x 254 mm - Ejector stroke max.: 80 mm - Clamping unit: VV - Lift of protective bonnet: 500 mm Injection unit: - Screw diameter: 28 mm - Screw L/D ratio: 18.6 - Screw stroke max.: 95 mm - Injection volume max.: 58.5 cm³ - Injection pressure: 1577 bar - Plasticising flow: 8.6 g/s - Injection flow: 85.5 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive power: 7,4 kW - Total power: 13,2 kW - Hydraulics: 210 bar (tank 65 litr ...

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg

clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS100M4/TF/IS -Speed: 1445/41 rpm i= 35.57 -Power: 1.1 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 600/162/H255 mm -Weight: 43 kg

Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate Quantity: 1 piece available -Dimensions: 170/110/40 mm -Weight: 1.1 kg

Servomotor, actuator, air flap servomotor, geared motor -Manufacturer: ELVI, actuator -Servomotor: Type 100605 -Voltage: 24V -Quantity: 3x drive available -Price per piece -Dimension: 190/110/H125 mm -Weight: 1.6 kg/pc.

Fan, fan, electric motor, blower, axial fan, axial fan -Manufacturer: ebm, axial fan type A2E200-AF02-02 TW -Voltage: 230V 50W -Speed: 2740 rpm -Quantity: 2x fans available -Price per piece -Dimensions: 255/140/H280 mm -Weight: 2.2 kg

Key data: 750 mm, 600525 mm

Machine Details Stock-No. 1105-04039 Type of machine Machining Center - Universal Make DMG Type DMU 70 EVOLUTION LINEAR Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin GERMANY Delivery time IMMEDIATELY Freight basis EX WORKS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm revolutions per minute 18000 rpm spindle taper ISO SK 40 control HEINDENHAIN ITNC 530 chip conveyor YES kW total power requirement 50 kW weight of the machine approx. 11 t Additional information VERY NICE MACHINE COOLING TRONG THE SPINDEL 40 BAR HP CHIP CONVOYER HSK 63 MAGASIN 120 TOOLS CTXS TROUGHT THE SPINDLE 40 BARS

Connected load 380V 3.5A Pneumatic connection 8 bar Total height 3600 mm Overall length 4400 mm 1x fixed stop 2x pressure beams - can be clamped over rack 2x pressure cylinder stroke 100 mm pneumatically clampable 1x manual control for transverse and longitudinal pressure and loosening presses 1x medium pressure beam 600 mm height (working area) 1x additional longitudinal pressure cylinder 1x slanted window pressing device

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: commission trolley -Chassis: 4 swivel castors -Dimension: 1515/900/H1640 mm -Weight: 83 kg

Power resistor, wire potentiometer, resistor, potentiometer, double potentiometer, regulator -Manufacturer: Elvo, potentiometer controller with on/off switch -Type: ED 1.5 GS -Voltage 220 V 1.5 A 270 W -Dimensions: 105/75/H135mm -Weight: 0.3 kg

Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, cutter holder with coolant channel in original packaging -Type: HSK 63-12-80-K -Art.No.: A63.04.12.K -Transport dimensions. 470/100/H95mm -Weight: 1.2 kg

Connectors, plugs, sensor modules -Manufacturer: Wago, Winsta ECBT2 connectors, 25 pieces -Connector: Wago 3-pin with strain relief housing -Quantity: 6 boxes of 25 pieces each available -Price: per carton -Cardboard dimensions: 200/185/H55 mm -Weight: 0.6 kg/carton

Key data: 490 mm, 1250 , 990

Machine type: EVP-A 220 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP-A 250 mass finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The  ...

Key data: 670 mm, 1500 , 1125

Machine type: EVP-A 350 Manufacturer: ERBA Power kW: 2.2 Total volume: 350 lt. Description: The EVP-A 350 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. ...

Key data: 1620 mm, 1915 , 1215

Machine type: EVP-A 800 Manufacturer: ERBA Power kW: 5.5 Total volume: 1.000 lt. Description: The EVP-A 800 vibratory finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional cost ...

Key data: 360 mm, 1060 , 900

Machine type: EVP-RA 100 Manufacturer: ERBA Power kW: 1.1 Total volume: 130 lt. The EVP-RA 100 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 100 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Door opening button, push button, door opener -Manufacturer: eao, Door opening button with mounting kit (original packaging) -Type: 56-210102-00 410 -Voltage: max. 137 VDC -Quantity: 10 pieces available -Price: per piece -Dimensions: 160/140/H30 mm -Weight: 0.1 kg/pc.

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...