cat 3520 e used for sale

Paper cutting machine Polar D 56 ECO Year of construction 2019 Kind. Model No. PS6297 (L920) Price: 15500 FCA

Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of GSL (German Standard Lift) work platforms -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 11 motors available -Price: per piece -Dimensions: 175/170 mm -Weight: 6.5 kg/piece

Tapping chucks, thread chucks, tapping chucks, tapping attachments -with slip clutch -Integrated reversing gear with fast reverse -Counter holder for the return is missing -Thread sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.3 kg

turning diameter over bed: ? mm turning diameter over slide rest: ? mm turning length: ? mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE 100 UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 4.5 kg

Roller chain, drive chain -per package length: 5 m -16B-1 roller chain -1-way 1 x 17.02 -Price: 28 euros per meter

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 10 mm -Length: approx. 7 m -Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 3 kg

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE140UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 13 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE160UK-2RS -Quantity: 1x spherical bearing available -Price: per piece -Weight: 19 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope Ø 14 mm -Length: approx. 45 m -Material: Stainless steel -for electric cable winch -other crane ropes are also available -Weight: 37 kg

Air filter -Type: SMF 30/50 -Diameter: Ø 81 mm -Dimensions: 780/140/140 mm -Weight: 2.3 kg

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

Pressure transducer -Type: PMP131-A3101A1X -U: 12...30 VDC -Weight 0.5 kg

Disc valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN50 -Material: Stainless steel -Weight 2 kg

Toggle bolt, anchor hook -Type: EKD-HM4 -Quantity per package: 50 pieces -M4 threaded rod Price: per package -Number of packages: 12 -Weight: 1.2 kg/package

Hydraulic pressure switch -Type: EAXT518A-3 -Connection: 21-26 VDC -Price: per piece -Number: 8 available -Weight: 0.1 kg

MIG/MAG hose package -Length: 4 m -Tuchel connector: 3-pin -Gas: cooled -Weight: 4 kg

Toggle bolt, anchor hook -Type: EKD-HM5 -Quantity per package: 25 pieces -M4 threaded rod Price: per package -Number of packages: 21 -Weight: 1 kg/package

Pressure reducer, pressure regulator -Type: 444.223 -Connection: 1/4 -Price per piece -Number: 8 available -Weight: 0.4 kg/piece

Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper -Manufacturer: SEW Eurodrive, braking resistor type BW068-004 -Item no .: 8216932 -Power: R = 68 Ohm P = 400 W -Number: 1x resistors available -Dimensions: 385/85 / H120 mm -Weight: 1.9 kg

Forklift battery charger, industrial charger, forklift battery charger -24 volts -Power: 63 A -Connection: 220 volts

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Emod, gear motor type SK400SUF-63L-4/2 -Speed: 175/356 rpm -Power: 0.15/0.19 kW -Shaft: Ø 14 x 60 mm -Protection class: IP54 -Dimensions: 300/170/H180 mm -Weight: 10.6 kg

Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A  ...

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Eurodrive, geared motor -Type: R40 DT71D4 -Speed: 32 rpm -Power: 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Dimensions: 405/146/H213 mm -Weight: 15.6 kg

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

5-Farben Etikettendruck- und Endlosdruckmaschine - 5-Color Label- and Business Form Printing Machine Edelmann Junior Print DR2450 Baujahr / Year 1995 - Serial-No. 1.228/8 Size 8 1/3" Druckformat / Printing Size max. 207.5 x 360mm Geschwindigkeit / Speed max. 40.000rev/h Papierbreite / Paper width 150-370mm Rollendiameter / Reel diameter 1000mm Diameter Kern / Core 70mm Papiergrammatur / Paper weight 30-160gr7sqm Schnittlänge / Cutting length 423.3 or 211.6mm Rolle zu Bogen / Roll to Sheet Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Clamping force: 600 kN - Mould height max: 190 mm - Platen size (h x v): 910 x 400 mm - Control: CC220

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Eurotherm, servomotor type ACM2n 0220-4/1-3 -Speed: 4000 rpm -Torque: 2.2 Nm -Shaft: Ø 14 x 30 mm -Protection class: IP54 -Dimensions: 200/88/H120 mm -Weight: 4.2 kg

Circulation pump, centrifugal pump, water pump, pump, heater -Manufacturer: Speck, circulation pump type EWN8/2-4 -Engine: Type EWN8/2-4 -Dimensions: 180/130/H180 mm -Weight: 3.6 kg

Bindemaschine - Binding machine Esselte 3000 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

1 Zangen Klebebinder - 1-Clamp Perfect Binder CP Bourg BB-3002 EVA Year 2008 - Serial-No. 61300520 Zählerstand / Counter 118615 Buchrückenbeleimung / Spine Gluing Hotmelt Seitenbeleimung / Sight Gluing Hotmelt Fräswerk mit Absaugung / milling section with extraction Frästiefe einstellbar / milling depth adjustable Technische Daten / Technical Details: Papierformat / Sheet Size min. 100 x 201mm - 385 x 750mm Umschlagformat / Cover Size min. 100 x 201mm - max. 385 x 750mm Buchstärke / book thickness min. 1mm - max. 60mm Umschlagstärke / cover weight range 80 - 300 g/qm Umschlagstapelhöhe / cover pile hight max. 80mm Leistung / speed max. 650 Cycles/h Abmessungen / dimensions 2.020 x 2.400 x 1.500mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be t ...

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: SBA, transformer type ETK 168-0110 -Power: 1840/4340VA -Technical data: see type plate -Dimensions: 175/165/H150 mm -Weight: 20.3 kg

Manueller Blockhefter - Stitching machines Nagel ENAK 50 Serial-No. 4105 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Eckenrundstanze / Corner Cutting machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg

Level indicator, sight glass, steel reflector, sight glass fitting, sight glass device -Manufacturer: Eriks, Econ Level Indicator -Type: FIG. 1590 -Test pressure: 3 bar -Number: 2x level indicators available -Price: per piece -Dimensions: 100/60/H3050 mm -Weight: 25 kg/pc.

1-Zangen Klebebinder Kaltleim - 1-Clamp Perfect Binder Cold Glue Müller Martini Econobinder EB II Year 1973 - Serial-No. Serien-Nr. 4700.1 Speed (mechanic) 800-2400 tact/hour Format min. 90 x 60 x 3mm without cover Format min. 90 x 80 x 3mm with cover Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test