cat 3520 e used for sale

centrifugal pump, water pump -Flow rate: 88 m³/h -Max. H: 50mWs -Motor power: 18.5 kW -Speed: 2935 rpm -Inlet pipe connection: DN 65 -Pipe connection outlet: DN 50 -Number: 1x pumps available -Price per piece -Dimensions: 710/390/H365 mm -Weight: 164 kg

Diebels Recyclingmaschinen_Kabelgranulieranlage EUREKA 15 Granulator: 15 KW Connected load: 22 KW Weight: 2,500 kg Capacity: 100-250 kg/with pre-shredder up to approx. 300 kg/h Optionally available with shredder/conveyor system with permanent magnet

Grinding wheels are available, they are still unused and originally packaged in a box. 1x Elbe abrasive media (MICROREX) Shape: 01 Straight Disc 104228/1 400,00x200,00x203,20 58AY 80/2 KL 8 V for: 35 m/s forcibly guided; 30 m/s walk-behind 3x Elbe abrasives (MICROREX) Shape: 01 Straight Disc 104228/2 400,00x140,00x203,20 58AY 80/2KL 8V for: 35 m/s forcibly guided; 30 m/s walk-behind 1x Control disc 140mm. Comet (Elbe) S33728 Shape:01 Straight Disc 250,00x140,00x127,00 A120 R13 8-974-51/18 1x Regulating disc 200mm. Comet (Elbe) S32848 Shape: 01 Straight Disc 250,00x200,00x127,00 A120 R13 6-055-24/18 1x WISSCO dressing tile AP23NAD 1x Lifting crane for grinding media

Diebels Recycling Machines -Cable pelletizer EUREKA 15 LINE Granulator: 11 KW Pelletizing system connected load: 22 KW -Conveyor system with magnetic head roller Drive: 0.37/400 V -Pre-shredder RMR 170/400 Drive: 12 KW with 0.75 KW Hydraulic Gate Valve Pelletizing system Eureka 15 used system overhauled from year: 2006 Conveyor system with magnetic head roller New machine Pre-shredder RMR 170/400 new machine Electrically configured with power control Capacity with pre-shredder up to approx. 280 kg/h

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Dear Ladies and Gentlemen, the machine is to be returned immediately.the machine ran in a single shift, the Siemens modules are new

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg

Inv. Num. : 7723 Type: ZRM9 Producer: Ernst Grob Generated: Parameters: The machine is used to produce involute grooves by extrusion. Accessories: Several grave goods Universal Gear wheels

bar material dia.: max. 85 mm bar length: 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Aluminum Saw Manufacturer: Emmegi Type: 550 SCA Year of Make: 1996 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference M-EME-0724 DESCRIPTION We offer you a used aluminum saw from the manufacturer Emmegi. Saw blade stutters up, hence the special price. Saw drive runs clean and quiet Digital angle display New minimum quantity lubrication from Menzel from 2022 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

• Conveyor belt length 1,350 mm • Conveyor belt width 100 mm • Web spacing 30 mm, web height 5 mm • Conveyor belt made of white plastic, as good as new • Adjustable inclination • 1 speed • Dust compartment • Without inlet and outlet funnel • Mobile • Drive 400V/50Hz

Electric stair climber Payload 200 kg Work safely and effortlessly Suitable for step heights up to 210 mm Robust aluminium housing foldable / fold-out incl. charger one battery charge is sufficient for approx. 1600 steps suitable for indoor and outdoor use Weight incl. batteries approx. 30 kg

Temperature control unit Chocolate Dissolving Device with Container adjustable with temperature regulator 0 to 70°C Lid Water bath heating Tabletop appliance stainless steel version Connection 230V, 800 watts, ready to plug in Device dimensions approx.: 540 x 480 x 290 mm, WxDxH Used device cleaned and tested Many temperature control units in stock!

Key data: 7300 mm, 1000 mm, 650 mm

- Swivel angle A-axis: 0-90° freely programmable - C-axis swivel angle 0-355° freely programmable - Max. machining length without frontal machining: 7300mm - Max. machining length with front machining: 6980mm - Tool changer with 10 places, as well as a saw blade holder - 9 Material tensioner - Tool holder SK30 - 2-layer machining

table width: 8000 mm table length: 2000 mm burner heads: 2 weight of the machine ca.: 3 t dimensions of the machine ca.: 8x6x2,5 m 1 used flame cutting machine with optical scanning manufactured by ESAB Type PXB 20 year of construction 1980 cutting area approx. 8000 x 2000 x 3 - 200 mm 2 torches Transport: - ESAB flame cutting machine - approx. 5.3 x 2.2 m. Weight approx. 3 tonnes o Boom 4.4 x 1.6 x 1.3 o Rails 5.3 o 8 U-frames 2.4 m x 0.16 o Tub 1.3 x 2 o Firing table 1.6 x 3 x 0.57 o Plant table 1.85 x 2.30 Total approx. 5.3 lm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We have a complete game SCHNEIDER ELECTRIC BRAND 3 QM/ 2 IM/ 1 CM/ DM2 First commissioning 2017 Next interview 2026

Inv. Num. : 7803 Type: EM 5 N II/L 2F Producer: ERNST Created: 2006 Parameters: Minimum length of the workpiece: 350 mm Maximum workpiece thickness: 70 mm Grinding width: 1380 mm Weight: 5100 kg

Air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Gear motor, electric motor -Speed: 33 rpm -Power: 0.75 kW -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 540/200/H225 mm -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Famar Ergo 260 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens Main spindle nose: ASA 6 Inverted lathe: yes X-axis spindle stroke: 820 (335)mm Z-axis spindle travel: 265mm Main spindle power: 31Kw Turning diameter: 250mm Turning length: 240mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 First turret tool attachment type: VDI 40 High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt Other technical data: additional two-tool holder :::D DIMENSIONS AND WEIGHT::: Weight: 10000Kg

Machine Type: NC Cycle Lathe Manufacturer: Emco Type: Emcomat EM300x2000 Year of Make: 2015 Condition: used / very good, few operating hours Serviced exclusively by Hedelius Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-EMC-0824 DESCRIPTION We offer you a used NC cycle lathe from the manufacturer Emco. Control Fagor Spindle speed max. 2500 Multifix Base Holder Tip width 2000 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE  ...

Alexanderwerk Colloid Mill Fine Shredder E75-FN Continuous cutter with stainless steel housing Machine runs absolutely smoothly and smoothly Funnel made of stainless steel, easily removable The cutting gap can be infinitely adjusted via funnel, thus individual fineness of the product can be achieved Machine has the usual signs of use and is in good condition, but must still be thoroughly cleaned before use. Video about test run available

geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Make: ebmPAPST Diameter: 710mm Speed: 1750 rpm Power: 5030W 4 pcs. available Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3-310 mm Motor output: 7,5 kW Number of knives: 4-TERSA St. Feed speed: 6-20 m/min. Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A ----------------------------------------------------- NEW MACHINE Partnership Edition Technical data / basic equipment: ----------------------------------------------------- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with  ...

Gear motor, electric motor -Speed: 59 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 475/190/H170 mm -Weight: 18.90 kg

0: 300 mm 0: max./nom: 6.000/5.085 m³/h 0: v.V./nom: 2.950/2.400 Pa pa Filter capacity: 36,2 m² m² weight: ca. 1.300 kg Dimensions (L/W/H): 3.880 x 1.020 x 2.250 mm Dust extractor NE-J 300 3 ton. m. Jet filter regeneration -------------------------------------------------- Including a new type of extinguishing device with a drop flap and oxygen extraction, 5 m cable for junction box, high-efficiency reluctance motor IE5, FU control, Wired 7 color touch panel, automatic start/stop start control and monitoring of up to 10 woodworking machines included automatic slide control, integrated emergency stop function and is of course H3 tested. The newly designed model fits into any standard shipping container. The suction nozzle with injection box and non-return flap is located in the middle of the front dust extractor. The highly efficient JET filter regeneration guarantees high Filter servi ...

Gear motor, electric motor -Speed: 0.49 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 60 mm -Protection class: IP 54 -Dimensions: 740/380/H410 mm -Weight: 133 kg

ECONO PAK FA-KT and WVE-DR-R + 1-head folding carton display hotmelt (2 adhesive spots) + Angle Sealer + SIMATIC OP7 HMI + Nordson hotmelt 3400V-2GAV4D/R hot melt machine incl. hand glue gun + Handheld control unit + Videojet 2-line for coding + 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm + Built in 2003 + Good used condition WITHOUT checkweigher Folding carton conveyors

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm -Weight: 27 kg

Paint shop with UV dryer flow. Year of construction 007/00 Sale on behalf of customers, further data on request

Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Geared motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.25/0.3 kW -Design: B3 -Shaft diameter: Ø 30 mm -Length: 180 mm -Protection class: IP 44 -Dimensions: -Weight: 25 kg

Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece

Gear motor, electric motor -Speed: 45 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 440/215/H180 mm -Weight: 21 kg

Frami Eco panel formwork 155m² The crane-independent and handy steel frame formwork for foundations, walls and columns. The lightweight Frami Eco formwork with a robust steel frame is ideal for fast and economical formwork with and without a crane. Frami Eco Framed formwork 155m² The crane-independent manhandled steel-framed formwork for foundations, walls and columns. The lightweight Frami eco formwork, with its sturdy steel frame, is ideal for fast and economical forming, with or without a crane.

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Quantity: 1 piece available -Weight: 26 kg

Gear motor, electric motor -Speed: 113 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: -Weight: 16 kg

turning diameter: 420 mm turning length: 600 mm control: Sinumerik 810D spindle turning speed range: 4200 U/min spindle motor: 18 kW spindle bore: 65 mm x-axis: 210 mm z-axis: 610 mm greates pass round over bed: 600 mm swing diameter over slide rest: 360 mm tailstock travel: 500 mm tailstock quill taper MT: 4 dimension of workpiece: dia 200 x 520 mm total power requirement: 20 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 x 1,9 x 1,9 m - CNC control Siemens Sinumerik 810D - 12-position turret (VDI 30), driven tools 4000 rpm - Main spindle - Tailstock (MK 4) - C-axis - Coolant device - suction unit - Chip conveyor Machine has mainly processed plastic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 84/128 rpm -Power: 0.48/0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Weight: 25 kg