cat 3520 e used for sale

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -A: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg

Basic module, distributor -Connection: 8 x M12 -PNP -5- pole -Dimensions: 150/50/H20 mm -Weight: 0.13 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

max. plate size: 824 x 1143mm mm min. plate size: 228 x 252mm mm max. speed plates: 15 /h incl. Rip incl. Compressor inkl. Glunz & Jensen MP 85 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Dosing system, dosing device, dispenser for dosing system, dosing machine -Type: 1500XL -Dimensions: 265/150/H65 mm -Own weight: 2 kg

Input module for valve terminals -Type: CP-E16-M8 -16 inputs: 24V DC -Signal status display: via 16 LEDs -CP- functionality -M8: connector -1x: M9 CP connection -PNP/NPN -Protection class: IP 65 -Dimensions: 65/150/H50 mm -Weight: 0.34 kg

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece

Dosing pump, 2-component dosing pump -For dosing liquid media -Dosing rate: 1.4 l/h -Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.

Backstation Backcombi Wiesheu Dibas EBO 64S- L Wiesheu Backcombi consisting of 1x convection oven Dibas 1x exhaust hood, 3x shelves EBO and base frame -Exhaust hood 64_200-240V50/60H Year: 2016 Convection oven Wiesheu Dibas 64 S C: -for 5 trays each 60x40cm -Voltage: 400V 50Hz -Power: 9.6 kW -Year of construction: 2016 Deck furnace 1x shelf EBO 64-S: -for 1 tray 60x40cm -Floor entrance height: approx. 15cm -Voltage: 400V 3/N/PE -Power 3.45 kW -Year of construction: 2016 Deck oven 2x shelf EBO 64-L: -one tray per shelf 60x40cm -Floor entrance height: approx. 13cm -Voltage: 400V 3/N/PE -Power: 7.1 kW -Year of construction: 2020 External dimensions complete approx.: 93x100x221cm

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

LOW-TENPERAURE SCREW COMPRESSOR UNITS SERIAL NUMBER:BLG1509002 VOLTAGE:415V/3Ph/50Kz COOLING CAPACITY:115.3 POWER:101.2KW REFRIGERANT/OIL:R507A/BSE170 SIZE:270017001700 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD

LOW TEMPERATURE SCREW COMPRESSOR UNITS MODEL BLGS -6NY+BLGS-SNYRSCTA) SERIAL NUMBER:BLG1509003 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:115.8kW POWER:101.2KW REFRIGERANT/OIL:R507A/BSE170 SIZE:2700"17001700 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO.. LTD

semi-hermetic screw condensing units MODEL:BBLGS2-8OMY-FB(R134A) SERIAL NUMBER:BLG1509005 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:216.4kW POWER:49kW REFRIGERANT/OIL:R134A/BSE170 SIZE:28501374.6`1321.4 ATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO., LTD.

-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010

semi-hermetic screw condensing units MODEL:BBLGS2-100MY-FB(R134A) SERIAL NUMBER:BLG1509006 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:248.4kW POWER:56kW REFRIGERANT/OIL:R134A/BSE170 SIZE:31501374.6' 1432.9 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD.

> Product DetaW Automatic strapping machine ERNST JÄGER Model: JU-200E /12mm High-quality stainless steel table top with recessed castors Mobile on castors (2 with brake) Belt tension electronic, individually adjustable Automatic remnant belt ejection Fully automatic strip threading electronics Includes foot control (foot pedal) Manufacturer: Minimum dimensions of packaged goods: W130 x H20 mm Temple opening: H600 x W850 mm Max. packaged goods: 100 kg Working height: 810 mm Strapping performance: up to 29/minute Strapping width: 12 mm Strapping thickness: 0.55 - 0.75mm Roller core: 200 mm Belt tension: 7 - 50 kg Machine dimensions: W1430 x D620 x H1540 mm Machine weight: 220 kg Noise level: 83 db (A) Connected load: 230 V, 50 Hz, 1.2 kW, 9A Year of construction 2019/09 Function tested, machine ready for immedia ...

From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts

Jungheinrich ERC-Z-12 Load capacity 1200kg Year of construction 2002 Battery renewed in 10/2019 Very good condition, has been regularly serviced Only 333 operating hours with Timetronic charger Bipqiakbhfd Lifting height 4300mm Free stroke 1500mm with initalhub Triplex mast Height 1900mm Emergency stop button

Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times

COMPOSITION: 01 Motorized roller conveyor/transversal/lifting roller conveyor mm 2,500 x 1,100 for feeding 01 Motorized roller conveyor consisting of mm 18,000x1,100-1,300 for unloading; Packaging dimensions on pallet mm 2,500x1,200; Speed controlled by inverter 01 Automatic wrapper Wraptor Dinamix HS with stretch film H 2.150 mm max. 01 Heating unit for automatic roll cutting 01 Siemens touch monitor and CNC control, hourly output max 40 pallets/h

3000 x 1500mm LOW HOUR MACHINE with Compact Express / Brush Tables

turning diameter over bed: 435 mm turning diameter over slide rest: . mm turning length: 750 mm turning speeds: U/min digital readout: digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ich habe eine gebrauchte - halbautomatische Donutform zu verkaufen. Preis 1950 Euro leicht verhandelbar.

Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

- technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 22 mm -Protection class: IP 54 -Quantity: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg

Fully Automatic Stretch Film Packaging Machine with Scale & Labeler Packing Plant / Wrapper + Labeler Fabbri Group ELIXA 35 / Libra-B.285.ESP Among Elixa automatic stretch wrapping machines, the Elixa 35 is the most powerful model in terms of speed (35 ppm). Like all the machines in the range, the Elixa 35 is a compact stretch packaging machine designed by the Fabbri Group specifically for particularly small workspaces and retail outlets. Elixa 35 can package any food that is compatible with stretch film and technology. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the package. It delivers the best results when combined with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the market, achieving unparalleled packaging aesthetics.  ...

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: CF-D-160-10 -Shaft: Ø 22 mm (pre-drilled) -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H70 mm -Weight: 9 kg

BRAND NEW AVR BY STAMFORD AVR regulator MX321-2 E000-23212 Board Still in factory packing. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg

Manufacturer: IKA Type: T50 EIS-TURRAX Power: 11,000 watts Speed-controlled: up to 10,000 rpm Swivel in a circular manner LWH: 400 x 400 x 1300 mm

Braking unit -Brake with clutch -Power: 0.15 kW -Resetting force: 30 kp -Stroke: 50 mm -Dimensions: 630/320/H460 mm -Weight: 56 kg

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

Gear motor, electric motor, electric gear motor -Speed: 32.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 33 -Dimensions: 440/210/H180 mm -Weight: 20.7 kg

Gear motor, angular gear motor, electric motor, electric gear motor -Motor power: 0.37 kW -Speed: 106 rpm -Shaft diameter: 30 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/210/H200 mm -Weight: 23 kg

Bread cutter Wabäma Model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machinery on the move Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine cleaned Many more bread slicers in stock!

Gear motor, electric motor, three-phase motor -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Dimensions: 305/195/H150 mm -Weight: 10.8 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 525/200/H160 mm -Weight: 20.7 kg