cat 3520 e used for sale

Paper Cutting Machine EBA 551-06 LT Year of manufacture 2009 Price 4800 Euro FCA Essen

Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

200 ton x 4000mm with Rolleri Pneumatic clamps

Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW

Power converter, power supply, power supply unit, converter, servo power unit, frequency converter Manufacturer: SSB -Type: DDUS 06 E38 C5 -Quantity: 1 available Price: per piece -Dimensions: 250/205/H195 mm -Weight: 5 kg/piece

Selling Proposal  DESIGNATION REFERENCE QUANTITIES SIEMENS SIMATIC S7-300 PLC 1 SIEMENS SM321 4 I/O BOARD SIEMENS SM322 I/O BOARD 4 FUSE DISCONNECT SWITCH WOHNER LTS-2 3 FUSE DISCONNECT SWITCH WOHNER LTS-000 3 VOLTAGE REGULATOR ROWAN ELETTRONICA 310 S.C/6M 3 EMERSON SP 1406 25 DRIVE EMERSON SP 2401 2 DRIVE

cutting diameter: 320 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: square: 180 x 180 mm strokes per minute: 40 - 57 - 80 - 115 1/min cutting speed: 16 - 22 - 31 - 45 m/min dimensions of saw-blade: 575 x 55 x 2,5 mm total power requirement: 3 kW weight of the machine ca.: 700 kg dimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 1 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS Unitek wide belt sander Excel LC 1350 1N KRT --------------------------- 1-BELT MACHINE WITH COMBI UNIT ROLLER/SHOE FOR SOLID WOOD VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm 1350 - GRINDING BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - Steel CALIBRATION ROLLER mm 180 - GRINDING SHOE WIDTH mm 50 - BAND MOTOR POWER HP 15 - BELT SPEED m/s 18 - FEED MOTOR POWER HP 0.75 - Adjustment gear feed carpet with infinitely adjustable speed m/min 4/ 20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BAND OSCILLATION ECO GEAR PATENT SYSTEM” - 1 PC. DRUM BRAKE for belt braking - Swivel ROLLER for belt tension - 2 pcs. PRESSURE ROLLERS, with rubber coating - EMERGENCY STOP SWITCH EDGE in the inlet - ELECTRONIC DISPLAY ...

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1350 mm Number of sanding units: 2 st. Workpiece thickness max.: 160 mm sanding belt measurements: 1370 x 2150 mm Feed motor: 0,75 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW Approx: 1650x1801x3390 mm Net weight: 5800 kg

Tool setting device, tool presetting device, cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication

collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 14 pieces clamping sleeves type ER25 -various sizes: 2-14 mm -Drawing in the pictures -Only sold as a package -Weight: 1 kg

scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Gear motor, electric motor -Speed: 99 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Number: 1x gear motors available -Price: per piece -Dimensions: 300/145/H130 mm -Weight: 5.3 kg

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Manufacturer: ifm -Type: ecomat300 AC5215 -Number: 36x modules available -Price: per piece -Weight: 0.15 kg/piece

Dissolver Vollrath EWFX 60 Power 44 kW Speed range 200-1200 1/min Double-toothed pulley with wall scraper as good as new control cabinet with FU Very good condition, straight from production

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg

Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Recess: Ø 102 mm -Bolt circle: Ø 116 mm -Through hole: Ø 29 mm -Weight: 4 kg

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Jungheinrich EFG216 Forklift truck Serial: FN319410 2005, Electric forklift, max lift 1500Kgs, treble mast

Perfect binder Eurotecnica 425 Year of construction 2002 Art.Nr. PS6041

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Safety switch, safety switch, TZ -AC-15 4 A 230 V -DC-13 4 A 24 V -Protection class: IP 67 -Number: 8x available -Price: per piece -Dimensions: 125/38/H42 mm -Weight: 0.1 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg

Inductive sensor, electronics sensor -Connector: M8 x 1 -Connection: 10-30 V DC -45 mm: long -Switching distance: 3 mm -Number: 2 pieces -Price: complete -Weight: 30 g

Nominal power in kilowatts: 7,7 MW Maximum power: 8,47 MW Nominal turning speed: 1150 1/min Maximum turning speed: 2200 1/min Nominal torque: 63940 Nm Maximum torque: 70330 Nm 8 MW test bench for gears, closed loop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jungheinrich EJE116 Electric pallet truck Electric pallet truck, load capacity 1600Kgs, forks 1150mm, with spare battery

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

Jungheinrich EFG216K Forklift truck Serial: FN492262 Electric forklift, max lift 1500Kgs, treble mast, with charger

Inv. Num. : 7386 Type: Dimension Elite Producer: Eden Praine Created: 2015 Parameters: Weight: 128 kg Equipment: Cartridges with print cartridges

Perfect binder Heidelberg Eurobind 600, machine number FMDDA0 000027, year of manufacture 2007, 1 clamp, hot melt, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

The type 221 fully automatic case erecting machines are designed to handle average sized cases in a wide variety of styles. The machines seal with either self-adhesive tape and are extremely simple to use. They are versatile, reliable and efficient. They also have a small footprint and offer great value for money. CASE DIMENSIONS The standard type 221 case erecting machines can handle cases between 200-500mm length, 150-400mm width and 175-600mm height. SPEED Up to 16 cases per minute Machine is ready for immediate use and available

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Staplers Hohner Economy 25/40 - 15/25 - 25 in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Printingmachine - Two Colour (perfector) Make Aurelia Model 702P Elite Year 1985 ? Maximum sheetsize 720 x 1020 mm Dampening Alcohol fiilm dampening with Miniweb chilling pump Perfecting 2/0 - 1/1 Details high pile delivery Available Direct

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -A: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg