cat 3520 e used for sale

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Stainless steel tank, stainless steel container, silo system, tank, lid, sealing cap -Closure cover: with spring clamp -Price: per piece -Quantity: 11 pieces -Minimum order: 4 pieces -Dimension: Ø 180 x 45 mm -Weight: 0.4 kg/piece

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.

turning diameter: 200 mm turning length: 0,0 mm control: Siemens 810 D working spindle speed range: 4200 U/min travel -x axis: 210 mm travel -z axis: 610 mm spindle passage: 65 mm total power requirement: 0,0 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CCM turret bearing / Slewing bearing Drawing: 190.40.4140.000.41.1502 Dimensions / Dimensions: 4405 / 3886 x 222 mm

Transport container winter service, for spreader, salt spreader, salt container, grit container, -Filling device: for road salt, fertilizer, for hand spreader -Bank: made of stainless steel -Transport frame: made of galvanized steel tube -Transport dimensions: 1800/1400/H1265 mm -Weight: 250 kg

max. tool diameter: , mm 0: , mm operating pressure: , bar filling amount: 52 l Quicksonic QS 520 ------------------ Ultrasonic cleaning device with lid and work basket Usable dimensions: L 500 x W 400 x H 260 Usable basket dimensions: L 444 x W 364 x H 224 Content: approx. 52 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Remote control sockets: 4 -Dimensions: 225/110/H45 mm -Weight: 1.0 kg

Robot Yaskawa Motoman ES 165N NX100 with Euromap 67 interface Control: NX100 Max. payload: 165 kg Max. working range: approx. 2651 mm

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

used DC shunt motor 18 kW Anchor voltage 460 V 45 A 3000 rpm with filter fan and tachogenerator can be installed as B3 or B5 Collector and carbon brushes top

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock # U2412-4 Unused carbon steel progressing cavity pump by Mono (UK) type E11B. Pump has reported output up to 1.5 m3/h. Working pressure up to 1.6 bar. Rotor works with 498 rpm. Inlet and outlet have diameter 50 mm. Pump is driven by el. motor 0.75 kW, 1425 rpm, 220-380 V, 50 hz. Technical documentation in digital form. New 2019. Never used.

EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE  ...

Inductive sensor, electronics sensor -High temperature resistant: 230 °C -Cable length: 10 m -Manufacturer designation: Cable socket 10 m -Type: VK A0 69 41 -Number: 16x available -Price: per piece -Weight: 250 g

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 455/400/H880 mm -Weight: 23 kg

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

Wire-O punching machine Make Bomco Model EPS-330 Year Working width 330 mm Tools 3:1 Wire-O tool with round holes Details Electric, other tools can be purchased Available direct

Power converter, power supply, power supply, switching power supply, power supply module -Input: 3 x 360-520 V AC 50/60 Hz 2.40-1.70 A. -Output: 24 V 40 A DC -Price: per piece -Number: 6 pieces -Dimensions: 140/160/H130 mm -Weight: 3 kg/piece

Level limit switch, level measuring device, sensor, switch, level transmitter -Pepperl+Fuchs Part No.: 103375 -Dimensions: 130/120/H30 mm -Weight: 0.2 kg

Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph

Auriol cooking kettle Stainless, 400l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Auriol M500VBEX cooking kettle Serial: 3430 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Nominal consumption: 500 W -Drilling/hammer drilling -Speed: 0 - 2200 rpm -Dimensions: 290/80/H200 mm -Weight: 2.2 kg

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Ritz, active power transmitter -Type: ELMU-AHW4B-A3 -Number: 3x devices available -Price: per piece -Dimensions: 85/95/H110 mm -Weight: 0.5 kg

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type A2E250-AE65-17 -Voltage: 230 V 115 W -Speed: 2550 rpm -Dimensions: 258/147/H313 mm -Weight: 3.7 kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg

Corner transport table Left-Right Make MBO Model ET46 Year 1995 Width 460 mm Details corner roller table that can be flipped over to turn your products left or right, adjustable in height, new drive belt installed Available direct

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Adapter sleeves: 15 pieces, with storage box -Sizes: Ø 4-16 mm, see photos -Sale: only for sale as a whole -Dimension box: 115/195/H50 mm -Weight: 1.4 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 64 , 80 , 400

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Technical data generator: Generator manufacturer: Endress Generator type: EZG 80 / 4 IT / TN-S Generator power: 80 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 740 Height approx. mm: 1.007 Length approx. mm: 1.192 Weight approx. KG: 500 Stock number: 1372 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 80 kVA – Brushless with electronic voltage reg ...

Gear motor, electric motor -Speed: 23 rpm -Power: 7.5 kW -Design: B5 angle -Diameter shaft: Ø 70 mm -Protection class: IP54 -Dimensions: 910/500/H445 mm -Weight: 278 kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M12/PCN 015341 -Connection: 12 mm -Dimension box: 220/80/H90 mm -Weight: 0.5 kg

Roller conveyor, conveyor belt, roller track -Roller conveyor: 5 floors -Roller width: 300 mm -Rollers: Ø 50 mm -Roller spacing: 150 mm -Floor spacing: 700 mm -Overall dimensions: 650/400/H3010 mm -Weight: 72 kg

wire electrode, welding wire, welding wire -Eurotrode: Carbo 2002 -Diameter: 1.00mm -Price: per roll -Number: 3 rolls available -Dimension: O 300/100 mm -Weight per roll: 15 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Max. Pressure: 8 bar -Price: per piece -Number: 2 pieces -Dimension: Ø 27/194 mm -Weight: 0.3 kg/piece

Plasma hose package, welding torch, MIG/MAG torch -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces -Weight: 3.2 kg

proximity switch -Ø: 3.6 x 20.5 -stainless -Protection class: IP 67 -Number: 7 pieces -Price: complete -Weight: 70 g

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Perkin Elmer Lambda 25 UV VIS Spectrophotometer, Dual-beam device, wavelength range 190-1100nm, 10 mm or 100mm cuvette holder, Option flow-through cuvette with peristaltic pump, Software Perkin Elmer WinLab

Easyroast ERL02 mini roasting oven Serial: 933 2014, 9.5Kw, capacity up to 20Kgs per hour, ideal for sunflower seeds, peanuts, chickpeas, cashews, almonds, hazelnuts and pistachio, comes with 25l salting unit

Easyroast ERL02 mini roasting oven Serial: 932 2014, 9.5Kw, capacity up to 20Kgs per hour, ideal for sunflower seeds, peanuts, chickpeas, cashews, almonds, hazelnuts and pistachio, comes with 25l salting unit

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 660 mm -Total length: retracted 805 mm -Hole: Cylinder: Ø 40 mm -Price per piece -Quantity: 2 pieces -Dimensions: 805/155/H95mm -Weight: 19 kg/piece

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty