128,396 used machines on RESALE, but how to find them? Machine Search
Dimensions (L/W/H): 750x2000x2000 mm Weight: 190 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Conveyor belt Stollen belt Conveyor belt Flat belt, mobile, mobile used Manufacturer: andre zalkin & co Type: ECT Conveying length: approx. 3000 mm Width: approx. 200 mm Funnel approx. 1100 x 1100 mm partly stainless steel Belt channel with Plexiglas cover mobile Foldable Drive with gear motor Total dimensions: approx. 4500 x 1200 x 1200 mm
Dimensions (L/W/H): 750x1400x2000 mm Weight: 137 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 7000x2300x2100 mm Weight: 3200 kg Total power requirement: 28 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3460x1000x2400 mm Number of filters: 73 St. Number of dust containers: 4 St. Weight: 410 kg : 355 mm : 520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 920x2100x2150 mm Weight: 300 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
L=440 Pull-out dimension:40 FL ø = 120 Hole 8/8
Dimensions (L/W/H): 920x2260x2150 mm Weight: 300 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x3000x2200 mm Weight: 450 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5800x2250x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX610 Profile Dimensions: 76.2 x 63.2 x 1.8 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 2,250 mm Depth: 1,050 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request
Miwe SK-II Econo steam condenser power: 0.2 kW; dimensions 90x125x19 cm; 2 pcs in stock; new
Condition: New Year: 2025 Manufacturer: CREZTA Equipment Capacity: 6.000 birds/hour Material: Stainless steel AISI 304 Warranty: 12 months CE compliant: Yes Description: Factory-new gizzard peeler designed for poultry processing plants with medium to high capacity requirements. Robust stainless-steel construction, optimized peeling performance and easy access for cleaning and maintenance. Designed and engineered in the Netherlands. Manufactured under controlled production conditions in Vietnam. Suitable for broilers and roasters. Ideal alternative to used or refurbished peelers from Meyn, Stork, Linco or Foodmate. Technical highlights: New equipment – zero wear Hygienic design Low maintenance Energy-efficient motorization Easy integration into existing giblets lines Options available: Gizzard washer Infeed / outfeed tables Control panel Chillers (1–3 sec ...
EBM-PAPST S3G710 CG 98-07 Brand:EBM-PAPST Type:S3G710 CG 98-07 Stock number:M22-7107 Cooling capacity:0.0001 kW Number of fans:1 Voltage:400 Volts Power consumption:1,9 A Motor power:1,2 kW Dimensions:Ø 710 mm Year:2022 New/unused Number in stock:50 piece(s) Price: Quotation request Description: New unused EBM Papst E.C. fans (1010 rpm). Visit our website: used-refrigeration
Shared oven Wiesheu EBO 5-124 Year: 2011 -Floor shop oven electric from Wiesheu GmbH -Oven is with 5 floors -each floor 120cm and 40cm deep -Year of construction 2011 -36.35 kW -with IS 600 control -top floor is with own control display -lower floors are each 1 control for 2 floors -Oven is mobile on rolls -Furnace with exhaust hood and vapour condenser
used electro-hydraulic notching unit Schlebach EHA, in mint condition, standard and clip relief can be processed, link, Driving and edging in three consecutive work steps, Preparation of a round neckline, prepared for lower and upper Rebate closures on roofs, dormers, facades and parapets before wedding finds Roof buckling points, grooves, monopitch roofs, façade bases, screens, Corridors and lintels, pre-profiled parallel coulters are divided into three sequentially connected work steps, oblique Shares or conical shares are alternately divided into four consecutive switched operations. Equipped with segmental rails in Upper beam, bending beam and support table. Various bending work, e.g. on Diamonds and shingles quickly and efficiently. Suitable for mirror roofing and cassette production Machine has been repaired, checked, cleaned by a professional and is fully functiona ...
ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably ...
; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380
; Gross weight [kg]: 1500; Inspection Date: 2025-12-23; Lift height[mm]: 1100; Maximum lift capacity [kg]: 220
Vacuum deaerator Manufacturer: Koruma Type: ERV (nameplate missing) Motor power: 1.1 kW with two pumps, speed controlled good condition LBH: 1500 x 750 x 2100 mm
; Mileage [km]: 59700; Gross weight [kg]: 7490; Inspection Date: 2025-12-22; Amount of previous owners: 1; Lift height[mm]: 2130; Maximum lift capacity [kg]: 265
Expro BSJJ-600T Tempura machine Serial: L041101C 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph
Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...
weight max. in kg: 2500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V / 205AH LI-ion weight of the machine ca.: 3,9 t dimensions of the machine ca.: 3,57 x 1,15 x 2,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tipo de máquina Laminado y recubrimiento (laminating & coating) Procesos Preparada para laminado WET y DRY Probhvzbzjx N Ucxezjf Sistema de corte Sistema de cuchilla para poliéster (blade cutting system for polyester) Alimentador Mabeg feeder Formato mínimo de hoja 32 × 29 cm Formato máximo de hoja 106 × 142 cm Velocidad mecánica máx. 70 m/min Velocidad de producción máx. 65 m/min
Gable top Filling Machine with Capper Made by ELOPAK for Sale Item #: Usm-166 Category Gable Top Machines Gable top Filling Machine with Capper For Sale (ELOPAK) Type: Cold Filling for Fresh Milk/Juices Year of manufacturing 2005 Machine Brand: Elopak Made in Japan Machine Condition: Excellent Spare parts: Large qty spare parts available with machine
At Crezta Equipment, we supply complete giblet handling systems designed for hygienic processing, efficient separation, and consistent product quality. Main Equipment Included Gizzard processing units (opening, cleaning, peeling) Heart and liver separation systems Gut reception conveyors Stainless-steel offal transfer conveyors Inspection and trimming tables Giblet washing and cooling units Offal collection bins & pumps Key Advantages High hygiene standards with full stainless-steel construction Consistent giblet recovery and reduced product loss Easy access for cleaning and maintenance Modular design that adapts to any plant layout Reduced manual labour through automated separation and cleaning units Designed for Better Yield and Better Food Safety Our giblet handling equipment is engineered to minimize contamination risks and ensure clean, reliable product separat ...
Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...
chamfer lenght: 0900 mm plate thickness: mm distance between columns: 900 mm pressure: 20 t column arm: 230 mm stroke length max.: 150 mm travel -x axis: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 0900 mm plate thickness: mm distance between columns: 900 mm pressure: 20 t column arm: 230 mm stroke length max.: 150 mm travel -x axis: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros ...
DAIKIN EWAD 100E-SL008 Brand:DAIKIN Type:EWAD 100E-SL008 Stock Number:M22-4590 Cooling capacity: 97.9 kW Number of fans:2 Refrigerant:R134a Refrigerant content: 18 kg Rated voltage: 400 Volt Power consumption:38.8 kW Motor power: 2x 0.78 kW Dimensions: 2165 x 1292 x 2273 mm Weight:1.751 kg Year of construction:2012 Quantity in stock:1 piece(s) Price on request Description: Nice air-cooled Daikin chiller with 1 screw compressor. This chiller is equipped with a switch box and a controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Also visit our website: used-refrigeration
maximum number of results exceeded
please refine your search
