cat 3520 e used for sale

EBM-PAPST S3G710 CG 98-07 Brand:EBM-PAPST Type:S3G710 CG 98-07 Stock number:M22-7107 Cooling capacity:0.0001 kW Number of fans:1 Voltage:400 Volts Power consumption:1,9 A Motor power:1,2 kW Dimensions:Ø 710 mm Year:2022 New/unused Number in stock:50 piece(s) Price: Quotation request Description: New unused EBM Papst E.C. fans (1010 rpm). Visit our website: used-refrigeration

Shared oven Wiesheu EBO 5-124 Year: 2011 -Floor shop oven electric from Wiesheu GmbH -Oven is with 5 floors -each floor 120cm and 40cm deep -Year of construction 2011 -36.35 kW -with IS 600 control -top floor is with own control display -lower floors are each 1 control for 2 floors -Oven is mobile on rolls -Furnace with exhaust hood and vapour condenser

used electro-hydraulic notching unit Schlebach EHA, in mint condition, standard and clip relief can be processed, link, Driving and edging in three consecutive work steps, Preparation of a round neckline, prepared for lower and upper Rebate closures on roofs, dormers, facades and parapets before wedding finds Roof buckling points, grooves, monopitch roofs, façade bases, screens, Corridors and lintels, pre-profiled parallel coulters are divided into three sequentially connected work steps, oblique Shares or conical shares are alternately divided into four consecutive switched operations. Equipped with segmental rails in Upper beam, bending beam and support table. Various bending work, e.g. on Diamonds and shingles quickly and efficiently. Suitable for mirror roofing and cassette production Machine has been repaired, checked, cleaned by a professional and is fully functiona ...

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380

; Gross weight [kg]: 1500; Inspection Date: 2025-12-23; Lift height[mm]: 1100; Maximum lift capacity [kg]: 220

Vacuum deaerator Manufacturer: Koruma Type: ERV (nameplate missing) Motor power: 1.1 kW with two pumps, speed controlled good condition LBH: 1500 x 750 x 2100 mm

; Mileage [km]: 59700; Gross weight [kg]: 7490; Inspection Date: 2025-12-22; Amount of previous owners: 1; Lift height[mm]: 2130; Maximum lift capacity [kg]: 265

Expro BSJJ-600T Tempura machine Serial: L041101C 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph

Iberdrill Gear Column Drill Series T, TL25 drilling capacity for steel (ST 60) at continuous power S1: D25mm drilling capacity for grey cast iron (GG 20) with continuous power S1: D30mm thread cutting capacity for steel (ST 60) with continuous power S1: M 18 thread cutting capacity for grey cast iron (GG 20) with continuous power S1: M 22 Tool holder in the spindle: MK 3 spindle stroke (drilling depth): 120 mm Motor power spindle: 0.82/1.2 kW Drive: 8-speed gearbox with pole-shiftable motor Speed adjustment: manual Speed range for 50 Hz motor, n=1,500/3,000 rpm, pole switchable 65 -125 -185 - 365 - 540 - 1,055 - 1,560 - 3,060 rpm Feed: 300 mm x 270 mm Column diameter: 100 mm Distance spindle center / column (projection) 250 mm Machine weight (net) 250kg Gross weight 310kg Dimensions transport packaging (LxWxH) 2.14m x 0.6m x 0.8m Gearbox ...

weight max. in kg: 2500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V / 205AH LI-ion weight of the machine ca.: 3,9 t dimensions of the machine ca.: 3,57 x 1,15 x 2,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very little used !

Tipo de máquina Laminado y recubrimiento (laminating & coating) Procesos Preparada para laminado WET y DRY Probhvzbzjx N Ucxezjf Sistema de corte Sistema de cuchilla para poliéster (blade cutting system for polyester) Alimentador Mabeg feeder Formato mínimo de hoja 32 × 29 cm Formato máximo de hoja 106 × 142 cm Velocidad mecánica máx. 70 m/min Velocidad de producción máx. 65 m/min

Gable top Filling Machine with Capper Made by ELOPAK for Sale Item #: Usm-166 Category Gable Top Machines Gable top Filling Machine with Capper For Sale (ELOPAK) Type: Cold Filling for Fresh Milk/Juices Year of manufacturing 2005 Machine Brand: Elopak Made in Japan Machine Condition: Excellent Spare parts: Large qty spare parts available with machine

At Crezta Equipment, we supply complete giblet handling systems designed for hygienic processing, efficient separation, and consistent product quality. Main Equipment Included Gizzard processing units (opening, cleaning, peeling) Heart and liver separation systems Gut reception conveyors Stainless-steel offal transfer conveyors Inspection and trimming tables Giblet washing and cooling units Offal collection bins & pumps Key Advantages High hygiene standards with full stainless-steel construction Consistent giblet recovery and reduced product loss Easy access for cleaning and maintenance Modular design that adapts to any plant layout Reduced manual labour through automated separation and cleaning units Designed for Better Yield and Better Food Safety Our giblet handling equipment is engineered to minimize contamination risks and ensure clean, reliable product separat ...

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...

Refurbished

chamfer lenght: 0900 mm plate thickness: mm distance between columns: 900 mm pressure: 20 t column arm: 230 mm stroke length max.: 150 mm travel -x axis: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 0900 mm plate thickness: mm distance between columns: 900 mm pressure: 20 t column arm: 230 mm stroke length max.: 150 mm travel -x axis: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros  ...

DAIKIN EWAD 100E-SL008 Brand:DAIKIN Type:EWAD 100E-SL008 Stock Number:M22-4590 Cooling capacity: 97.9 kW Number of fans:2 Refrigerant:R134a Refrigerant content: 18 kg Rated voltage: 400 Volt Power consumption:38.8 kW Motor power: 2x 0.78 kW Dimensions: 2165 x 1292 x 2273 mm Weight:1.751 kg Year of construction:2012 Quantity in stock:1 piece(s) Price on request Description: Nice air-cooled Daikin chiller with 1 screw compressor. This chiller is equipped with a switch box and a controller. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Also visit our website: used-refrigeration

Brushes + grinding machine Erma Fabr. Erma Type. DG 243 Engine. 1.5 kW Turn. 1430 rpm

Tamper-Evident labeller for folding boxes. Machine is fitted with 3 Pagomat label dispensers, Code reader LAETUS etc. Output: up to 200 units/min. PLC: SIEMENS Simatic S7-300.

Mobile 4-gloves Isolator for sterility testing. PLC: SIEMENS S7-300 Simatic. Machine incl. hydrogen peroxide vapour generator for room/zone decontamination BIOQELL L-3, built in 2013. Classification of usable space: Class 100 Classification acc. to GMP: Class C Filter: HEPA Filter Class H14.

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 5 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 70 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 4 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 56 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

21.6m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 6 Number of levels: 6 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 7 x stand 6000 x 1100 mm bay load 20000 kg blue 72 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Hacker TH 250/650 with metal detector, sieve..

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...

21.6m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 6 Number of levels: 5 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 7 x stand 6000 x 1100 mm bay load 20000 kg blue 60 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

21.6m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 6 Number of levels: 4 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 7 x stand 6000 x 1100 mm bay load 20000 kg blue 48 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

36m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 36000 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 10 Number of levels: 4 (6 trusses + floor parking space) Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 11 x Stand 6000 x 1100 mm Bay Load 20000 kg blue 60 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.